Is there a computer expert to help you set up a wireless router

First confirm whether the wireless router you bought has a wireless bridging function, many routers sold outside now do not have a relay function.

Setup method: Set the first wireless router first.

1. Open IE and enter, the password is admin

2. Enter the setup wizard and select ADSL to dial (everyone basically sets up ADSL by themselves, I won't talk about the specifics, everyone will).

Now change the setting of the second wireless router.

1. Open IE and enter, the password is admin

4. Go to DHCP Server ->DHCP Service ->DHCP Server -> Do Not Enable -> Save.

Brand See the instruction manual to operate.

The settings of each brand of router are different, please provide the specific model of the router.

The first step is to check with a computer: Start - Run - cmd - Enter. To display the Administrator dialog box, enter "ipconfig all" and make a note of the default gateway as My Computer Displays:,Subnet Mask,.

The second step is to set up the mobile phone WLAN, start --- set up --- connect to --- WLAN--- turn on the WLAN--- wireless network---configure the wireless network" select your own Chinanet--- select "Next" after entering the --- next step --- complete.

Go back to ---Configure Wi-Fi" and select "Network Adapter" -- Configure --- default Internet settings for the network adapter DHD Network Ad--- select "Use a specific IP address" to fill in the above "IP address" IP do not duplicate the above IP, subnet mask, default gateway, "name server" backup. Click "OK" in the upper right corner to finish.

Turn on the WLAN switch to connect to ChinaNet, and try to connect to the Internet

Absolutely, there are two ways to do it:

1.Change the connection mode of the second-level router, connect the network cable connected to the LAN port of the first-level router and also connect to the LAN interface of the second-level router, at this time the second-level router is used as a switch, there is no need to set the WAN interface parameters, directly connect the network cable to the computer, just log in to set the wireless part of the parameters can be used, the wireless terminal searches for the wireless signal of the wireless router and enters the encryption key, and can be connected and used after verification;

2.Another way is to use the WAN interface of the second-level router, at this time the router is working in the routing mode, connect the computer with a network cable to log in to the second-level router, set the second-level router WAN interface to dynamic IP mode or static IP mode (the static IP address needs to be set according to the login IP address of the first-level router), and then set the parameters of the wireless part. However, it should be noted that the IP address assigned by the LAN of the second-level router must not be in the same network segment as the first-level router, otherwise there will definitely be conflicts;

3.In general, in the case of cascading multi-level routers, the first-level router needs to be set to the route mode, that is, after logging in, enter the WAN interface setting -PPPoe mode, and enter your broadband and password.

The first is the wiring, if you are using a cat to surf the Internet, the WAN port of the cat ** router is generally blue. Then use another network cable to connect from the LAN port of the router to the computer. Generally, there will be 1234 LAN ports, and any one of the 4 interfaces can be used, which is generally yellow.

After connecting, see if the local connection of the computer is connected, if it has been connected, open the IE browser Enter the pop-up dialog box, and then enter the account password is generally admin and then enter the routing settings interface, if you are dial-up Internet access to choose ADSL broadband PPPOE mode, click Next to enter your own broadband account and password Click Next, and then set the name and password of your wireless network, and then keep clicking Next, and finally the router will restart, and then you can use the wireless network. I hope it will help you, I hope to adopt, thank you.

Here's how to set up Wi-Fi:

1. Enter on the browser address and enter the username and password to log in.

2Click Setup Wizard.

3Enter the setup wizard interface and click Next.

4Select the PPPoE option and click Next.

5. Enter the broadband account and password, and click Next.

6Enter the Wi-Fi password and click Next.

7Click the Done button and the wireless network is set up.

First of all, if there is a wireless router, then first turn on the power supply, and then plug in the network cable, plug in the WAN port (usually the blue port), and then connect with the computer network cable on which LAN port to plug in, after doing these things, then you will see that there is an address and account password behind the router, after connecting, enter the address you see in the router in the browser, generally of course, if your home is using ** online network, then you have to prepare an additional modem, commonly known as "cat") and then enter, Enter the corresponding account and password, generally the new ones are admin After entering the operation interface, you will see a setup wizard on the left, attack (the general ones are automatically popped up) Enter the setup wizard interface Click Next, enter the Internet access method settings, we can see that there are three Internet access options, if your home is dialing, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

I chose PPPoE because I dialed. If you choose PPPoE dial-up Internet access, you need to fill in the Internet account and password, this should be understood by everyone, there will be an account to open broadband, and it will be OK to fill it in Then the next step is to enter the wireless settings, we can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill in casually, and then the mode mostly uses 11BGNFor wireless security options, we need to choose WPA-PSK WPA2-PSK, which is so safe that it will not be hacked and rubbed by the network.

The next step is to set it up successfully Click Done, the router will automatically restart, at this time you wait patiently. The interface that appears after success.

The wireless router needs to be set up according to the Internet environment.

Different Internet environments have different ways to set up wireless routers.

If it is a fiber modem wireless router that requires dial-up, set it up as follows:

1. Plug in the wireless router, don't connect the cat first, and connect the computer to any LAN port of the wireless router;

2. Enter the IP address of the router in the address bar of the browser (on the label behind the router), and enter the login username and password to enter the settings page;

3. Set up according to PPPoE (ADSL virtual dialing) mode, enter the Internet account and password;

4. Set the SSID, encryption method and password;

5. Save and restart;

6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

The easiest way to do this: read the instructions.