How to fix the washing machine only rings and does not turn

When the washing machine does not ring all the time, you can turn the washing machine to spin modeIf the wave wheel can be turned, the capacitor is damaged and needs to be replaced.

2. After removing the transmission belt, the wave wheel cannot be rotated, indicating that the motor is damagedThe motor needs to be replaced. And the motor is running normally and the dehydration is normal, which means that the clutch is damagedThe clutch needs to be replaced.

The reason why the washing machine and the laundry bucket only rings and does not turn:

1. The belt between the motor and the pomelo is loose, if it is a new machine, this is generally the case, or the plastic protective sleeve behind the motor is not removed.

2. Running the washing machine to listen to the sound of the motor (motor) does not rotate, if it does not rotate, it is (the capacitor is burned out, the circuit board is not powered or the motor is burned out).

3. If the motor is rotating, the belt is not falling off, and the barrel still does not rotate, it may be that the barrel is stuck on the edge of clothes or sundries, or there is a foreign object stuck in the clutch tripod.

Turn the washing machine to the spinning state and see if the motor rotates.

If the dehydration is normal, the clutch is broken, and if the motor does not rotate and there is a whining sound, it is possible that the motor or capacitor is broken. At this time, the washing machine is adjusted to the washing state, when the motor has a whining sound, add a force to the wave wheel by hand (only to the clockwise direction), if the wave wheel can turn under the action of the hand, it proves that the starting capacitor is broken, if the afterburner wave wheel still does not rotate and the wave wheel is very dead, the motor is broken (note that this step should first open the back plate of the washing machine, remove the belt, rotate the wave wheel by hand, if the wave wheel rotates freely, basically rule out the problem of the clutch). The cost of replacing the clutch and motor is about the same, about 200 yuan or more, and replacing the capacitor can be cheaper, about 50 yuan.

<> if your washing machine only makes noise, but doesn't turn, then there may be a problem with one of the following areas: self-ordering.

Faulty drive belt: If the drive belt breaks or comes loose, the washing machine cannot turn. You need to turn on the machine and check that the drive belt is intact.

Motor failure: If the motor is damaged or not working properly, the washing machine will not be able to turn. Check whether the motor windings and motor carbon brushes are working properly, and if they need to be replaced, you can ask a professional to replace them.

Faulty door locks: Some models of washing machines need to be closed before they can work. If the door lock fails, the washing machine won't work properly. Check that the door lock is working properly, and if it needs to be replaced, you can ask a professional to replace it.

Faulty control board: If the control panel fails, the washing machine will not work properly. Check whether the control board is working properly, and if it needs to be replaced, you can ask a professional to replace it.

Always disconnect the power supply and follow safe operating procedures before attempting to repair the washing machine. If you are not sure how to repair your washing machine, it is recommended that you have it checked and repaired by a professional service person.

It is recommended to contact the product after-sales service and have a professional overhaul carried out.

1. If the washing machine only makes a sound, but does not run, we can first turn off the power, open the lid of the washing machine, take out all the clothes, and then turn on the power, turn on the washing machine, and see if the barrel of the washing machine can operate normally.

At this point, we just need to be careful when placing the laundry to prevent it from getting stuck on the edges and then restart the washing machine.

2. If the washing machine is turned on, the washing machine only has sound, but the internal motor is not running normally, indicating that there is a problem with the motor, it may be that the motor is burned out, or the capacitor or the circuit board inside the motor is burned out.

3. If this situation occurs in the washing machine we just bought, we can first rule out the problem of the motor and the circuit, first check whether the protective sleeve of the motor has been removed, if the plastic protective sleeve at the motor is not removed, the washing machine will not work normally. If there is no problem here, take a look at whether the belt on the motor is loose, and if it is loose, re-fix it and then turn on the washing machine.

Replace the capacitor: when the washing machine has been ringing and not running, you can turn on the machine first and manually send the wave wheel, if the wave wheel can rotate slightly under the action of the hand, it means that the starting capacitor of the washing machine has lost its capacity or is damaged, then only need to replace the capacitor, and the washing machine can return to normal.

Replace the motor: adjust the washing machine to the dehydration mode, after opening the back cover of the washing machine, remove the transmission belt and manually rotate the wave wheel, if the wave wheel does not rotate in the case of hand rotation force, it means that the motor of the washing machine is damaged, then the motor of the washing machine needs to be replaced, and the washing machine can work normally.

If the wheel can rotate slightly under the action of the hand, it means that the starting capacitor of the washing machine has lost its capacity or is damaged, and the washing machine can return to normal only by replacing the capacitor.

If the washing machine does not run all the time, it may be caused by damage to the clutch of the washing machine. If the motor is running normally and the dehydration is normal, it means that the clutch of the washing machine is damaged, and the clutch needs to be replaced in time to make the washing machine work normally.

Hello dear, I am asking a question and answer master, your question has been received, please give me a few minutes to sort out a complete answer for you, in order to better help you solve your doubts, this side is manual, try not to end the order in advance

6. Motor starting capacitor is damaged: the starting capacitor capacity is insufficient. Solution: Replace the capacitor of the same type of motor.

Replace the capacitor: when the washing machine has been ringing and not running, you can turn on the machine first and manually send the wave wheel, if the wave wheel can rotate slightly under the action of the hand, it means that the starting capacitor of the washing machine has lost its capacity or is damaged, then only need to replace the capacitor, and the washing machine can return to normal.

Replace the motor: adjust the washing machine to the dehydration mode, after opening the back cover of the washing machine, remove the transmission belt and manually rotate the wave wheel, if the wave wheel does not rotate when the hand rotates hard, it means that the motor of the washing machine is damaged, and the motor of the washing machine needs to be replaced for the washing machine to work normally.