Why can t the safe be opened after opening it a few times? 5

Here I come: there are two forms of passwords.

Please pay attention to the check number method of the cabinet of mechanical passwords

1. Align the first set of password numbers to the right three times to the baseline.

2. Align the second set of password numbers to the left twice to the baseline.

3. Align the third set of password numbers to the right once and for the right time.

To put it simply: three on the right, two on the left, one on the right.

Note: 1 - Seeing the number counts once.

2- If the last digit of each dial is turned around, it must be started all over again, not back.

Electronic password cabinet:

1. If the battery voltage is insufficient, open the box with an emergency key or emergency power box to replace the battery in the built-in battery compartment;

2. Accidentally touched the reset button on the inside of the door in the box, and the password was restored to the factory password; Take a look at the manual, the exit code 1234 or 666666, or 168

China's famous brand, China's well-known trademark, China's industry iconic brand.

-Yongfa safe Changchun direct sales center will answer for you.

Let's see if it's right.

The usual opening method of the mechanical safe: (the password must be correct) 1: turn clockwise three times and align **1

2: Turn counterclockwise **1 and continue to aim counterclockwise **23: Aim directly at **3 clockwise

Regularity: Shun--Reverse --Shun; 3--2--1；Slow down and start over.

The key is in the second password, reversal 1 turn or less than 2 turns, each time to be correct, not more turns and less turns).

New Pagoda (Henan) Safe Manufacturing**** Fuzhou Sales Office at your service!!

The safe won't open the solution:

1. If the password is entered incorrectly, it is best to solve this situation, and the keyboard will be automatically unlocked after a period of time.

2. Check whether the LCD screen has black stripes, if it means that the LCD screen is broken, it needs to be replaced.

3. Check whether the power supply is turned on, you can use the external battery box to install the battery and insert it into the panel socket to operate, if you can operate, please open the door and check the battery box behind the door, whether the battery is there, whether the battery is polarized and reversed, whether the battery is not charged, and whether the battery is in good contact.

Extended information: 1. Among the more common safe cabinet products on the market, the commonly used passwords are: mechanical, electronic, card-swiping, fingerprint and remote control lockbox, etc.

2. The mechanical password is relatively stable and durable, and does not require a power supply. However, the operation method is slow to learn, the operation is inconvenient, and it takes professionals to change the password.

3. The electronic password has the advantages of fast operation and simple and casual password modification. Although the quality of electronic password locks has decreased in recent years, the quality has also improved, but because it is more complex, the stability and durability are not as good as mechanical passwords.

4. The card lock can use its own bank card to open the door of the safe, but if the IC card is required to be put together with something with strong magnetism, it will not be easy to use.

5. It is difficult to find the same fingerprint in this world, so the fingerprint recognition technology is applied to the safe, which has strong confidentiality and is easy to use. However, the opponent's dry and humidity requirements are stricter. The recognition of the position of the finger is also relatively dull.

Even if it is the same finger, if the position before the loss is different from the position before opening the door, it may fail to recognize.

6. If it is a safe with high anti-theft performance, the selected safe should not have an emergency key (spare key) hole, because although the emergency key is relatively hidden, if the thief is found, only need to open the safe directly through this emergency key, which has a very large security risk. But if you choose this kind of safe, if you really forget the password and the key is missing, then you can only forcibly open it by external force.

Hello! I am your automotive consultant, a special guest teacher, and the cumulative service has exceeded 10,000 people.

I've seen your problem, I'm sorting out the material for you, it will take a little time to type, please wait. 

The solution to the unopened safe cabinet The conventional opening method of the electronic safe cabinet: (the password must be correct, make sure that the battery voltage is sufficient) The password Open the door with the master key and the emergency key, there is a reset button inside, press once: 1 Enter the new password, press the key 2 Restore the factory password.

Factory password * new password can be entered in turn If the security cabinet still can't be opened after this method has been tried, then the following emergency opening method can also be used: when the electronic password system fails and cannot be used normally, use the emergency power box plug (or similar thin rod) to top the small hole directly below the panel, open the emergency lock cover plate in the panel, insert the emergency lock key, rotate the emergency key in the counterclockwise direction to open the electronic lock, and then open the door lock normally.

Conventional opening method of mechanical safe: (password must be correct) 1: Turn clockwise three times, continue to aim at **1 2:

Turn counterclockwise**1, continue to aim counterclockwise **2 3: Align directly clockwise **3 Rule: cis-inverse-cis; 3--2--1；Slow down and start over.

The key is in the second password, reversal of more than 1 circle and less than 2 circles, each time it must be correct, not more and less turns) What to do if the safe cabinet cannot be opened, the above is the introduction of common solutions that the safe can not be opened, you can refer to it, if the password of the private safe is forgotten and cannot be opened, it can be opened by the following methods: 1. First of all, you can use the emergency key: because each safe will be equipped with an emergency key when it is sold, that is, if you forget the password, you can cooperate with the master key to open the safe.

2. Contact the safe seller or directly with the technical department of the manufacturer to solve the problem through other means. 3. If the password is not successfully modified, it can be solved by the original password on the manual. 4. If the above methods can't be opened, then you can find a professional lock picking company to help open it.

First of all, confirm whether this is a mechanical or electronic cabinet.

If it is electronic, the password cannot be opened, most of the reason is that the battery is out of power, you can use the emergency key to open it, replace it with a new battery, and re-enter the new password.

The mechanical ones are generally three sets of numbers, so they are operated according to the following method:

1. Turn three or more turns to the right, aim at the first password and stop;

2. Turn left twice, that is, on the basis of the first password, the second number will stop after two times to the left;

3. Turn around to the right and aim at the third password, that is, stop when you see the third one.

Remember: Shun-Negative-Shun. Then insert the key and rotate it to turn it on.

Locate the emergency battery box, install four No. 5 batteries, and insert the emergency battery box jack for the combination lock. After opening normally, replace the battery inside the cabinet door.

1. If the safe is out of power and cannot be opened, the general treatment method:

1.Insert the key into the keyhole on the right side of the safe, then insert the normal key into the keyhole from the left side, and then rotate to the midpoint of the two keys to open the cabinet door. Then open the small gusset cover on the back of the case [where the battery is placed] and replace it with a new battery.

2.Just use the external power supply of the safe (when you buy the safe, there is a small square box with a plug-in terminal at one end) directly into the small jack under the numeric keypad on the safe panel, install a new battery in the external power supply, enter the password normally, open the key and turn it on again, and then install the battery in the external power supply into the battery box behind the safe panel.

3.Call the after-sales service of the safe manufacturer** and it will be handled by professionals. In order to ensure that this unexpected situation can be effectively handled, it is recommended to buy products with large brands and perfect after-sales service. As long as it is within the three-pack period, the special population book will be repaired free of charge.

Second, the safe alarm solution:

1.If you take out the battery, you won't be able to call the alarm, and the safe will be forced to dismiss the alarm.

2.If the safe doesn't vibrate, it won't call the police! If you call the police for 180 seconds, it will stop screaming!

3.That is, the password is wrong. If you provide the correct password for the alert immediately, the alert will be cleared instantly!

4.It means that there is a problem with the electronic board! It is recommended that the manufacturer replace it.

Anti-theft safes are divided into three categories: A, B and C according to their anti-vandal capabilities, among which the anti-vandal performance of Class C products is very good. Class A products that are commonly found in the market today. The specific requirements for the anti-vandalism performance of Class A anti-theft security products are as follows:

Use common robotic tools such as chisels, hammers, crowbars, and portable power tools such as hand drills, small electric hammers, and hand saws, and use them together. Do not open the door or open the 38cm2 opening in the cabinet for 15 minutes.

Summary. Hello, I am your exclusive technician, attentive, careful, dedicated to answering your car questions, for you to find the corresponding problem solutions and solutions!

Hello! The safe cannot be closed after it is opened. This is usually caused by a failure to engage the motor inside the safe.

It also depends on whether your safe is key-controlled or internally motor-controlled. If it is controlled by the key, it is necessary to focus on checking whether it is the key, which is caused by the failure of the lock cylinder lock body and cannot be closed, and it has been stuck in the open position. In this case, it is basically necessary to check or replace the lock cylinder lock body.

If you plug in the password, it will be a motor problem. Check to see if it is caused by a malfunction inside the motor, which has been stuck in the open position, causing the door to not close. It is recommended that if this fault occurs, it is best to go to a special repair or after-sales safe for repair.

After the safe is opened, the door can't be closed, what's going on??

Hello, I have seen your inquiry, please wait for a moment and answer it for you immediately.

Hello, I am your exclusive technician, attentive, careful, dedicated to answering your car questions, for you to find the corresponding problem solutions and solutions! Hello! The safe cannot be closed after it is opened.

This is usually caused by a failure to engage the motor inside the safe. It also depends on whether your safe is controlled by the banquet key or the internal motor. If it is controlled by the key, it is necessary to focus on checking whether it is the key, which is caused by the failure of the lock cylinder lock body and cannot be closed, and it has been stuck in the open position.

In this case, it is basically necessary to check or replace the lock cylinder lock body to solve the morning sail. If you plug in the password, it will be a motor problem. Check to see if it is caused by a malfunction inside the motor, which has been stuck in the open position, causing the door to not close.

It is recommended that if this fault occurs, it is best to go to a special repair or after-sales safe for repair. In order to avoid improper operation by unprofessional personnel, the safe will be damaged twice. Thank you Lu Xianghail for your consultation, I hope mine can help you.