How to reach 100ms internet speed

What we usually call bandwidth is actually "bits".", and what we mean by speed, it's measured in "bytes". In a computer, 1 byte = 8 bits, 1k bytes = 1024 bytes, so the ** speed of 1m of network bandwidth is at most 1024 * 1024 8 = 131072 byte seconds, that is, 131072 1024 = 128k byte seconds. This way you can calculate your theoretical maximum speed based on your own network bandwidth, of course, the actual speed will definitely be lower than this value, because the system and other programs still need to use a bit.

In this way, to achieve a speed of 100 ms, a broadband of 100 * 8 = 800 m bandwidth is required, and the bandwidth of all resources of the world's information network must reach at least 800 m bandwidth.

In fact, it's very simple, go directly to the telecom room 1 stick to get the door watch, and then take out the notebook to find a network cable and rub it on the switch, and set an IP at will is 100000000M.

Pull a gigabit fiber and come back! But you're only using it! It's an exaggeration, only Internet cafes or large companies are possible! This is very expensive, the technology is complicated, and it is not easy to get it!

Go and apply for a 1G fiber.

Pull Fiber for your own use But you have to have a relationship.........It is generally difficult for personal computers to approve ......

1. You can enter the running program on the computer, enter cmd, and then type ping + space + your IP address (+ sign does not need to be entered), and press the enter key.

2. If you are a China Unicom broadband user, you can log in to the online business hall.

After that, click "My Unicom" - "Convenience Service" - "Broadband Speed Test" on the home page to test the speed according to the prompt information on the page. You can also use the broadband number to log in to the client of China Unicom's mobile phone business hall - query - broadband service query - test immediately (the "broadband speed test" service does not support free streaming).

There are different concepts involved here, such as bandwidth and connection rate. The connection rate is the most basic limitation. The connection rate of optical fiber is very high, and the 100M given to you by telecom should be the maximum bandwidth limit.

The most common connection rate of twisted pair network cable is 100M (there are also 1000M ones), and its maximum bandwidth is only 100M without any restrictions. There are multiple standards for wireless connection, the common ones are 54m and 108m, but when the signal is weak and the interference is large, the device will automatically slow down to ensure stability, such as down to 20m. When the wireless connection rate is only 20M, even if it is unlimited, your bandwidth cannot exceed 20M.

So, your question is easy to explain.

The 200m broadband speed test is only 100m, why is the network speed not up to standard? Teach you how to detect problems step by step.

First of all, you have to have 100 megabit fiber, more than five types of network cables, and gigabit routers. There is a conversion in between, 100m is equal to . To divide by eight.

Two computers copy data with a single network cable.

100mbps=

Mbps to mb s conversion.

Mbps (MB S) stands for megabits per second and refers to the number of bits transmitted per second (lowercase B stands for bit).

MB S stands for megabytes per second and refers to the number of bytes transferred per second (uppercase b stands for byte).

100mbps=

1m: 128kb per second.

2m: 256kb per second.

4m: 512kb per second.

8M: 1024KB (1MB) per second.

10m: 1280kb (per second.)

100m: (per second.)

The speed given to us by the telecommunications department is calculated in "bits". And the speed shown to us by the computer in transit is measured in "bytes". The conversion relationship between the two is as follows: 1 byte = 8 bits.

The peak is.

Introduction to bandwidth:1m: 128kb per second 2m: 256kb per second.

4m: 512kb per second.

8M: 1024KB (1MB) per second.

10m: 1280kb (per second.)

100M: Theoretically it should be 12800kb (per secondFactors contributing to insufficient internet speed:3. In terms of broadband quality, some broadband operators will cause the 20m broadband speed to fail to meet the standard due to the aging of lines or equipment, especially during the peak period of Internet access, the broadband generally reaches the high specification, which may be common for non-optical fiber users.

4. In terms of multi-person sharing, many apartments or rental houses use hundreds of shared broadband, the lines are complex, the wiring is unreasonable, and the network cable quality is poor, although it is said to be 20m broadband, but it is also very easy to drop the line during peak hours. For example, there are two or three hundred people in an apartment, and the broadband is 200m large broadband, but if all users are connected to broadband Internet access, the average person may have a network speed of less than 1m, and in the early morning when there are fewer people who go online, the network speed can reach tens of hundreds of megabytes, which is the disadvantage of multiple people sharing broadband, and the peak period will be deadly.

Basically, it can reach about 12000kb, and there can be no exact number, which belongs to optical fiber, and general companies use this.

Nobody tells you because this kind of broadband hasn't been produced yet.

Telecom 100M Broadband Theory ** Speed Yes, the actual is generally around, if it is lower, it is recommended to check whether the network is plugged in, if there is no problem, it is recommended to call the operator's customer service for maintenance.

What operators call a few meters of broadband and ** speed are two different concepts. For example, the speed of 1m is 1024k, and the unit here is bytes, that is to say, the speed of 1m is equal to the byte of 1024k.

The operator's broadband of several mbits, the unit is bits, that is, 10m broadband actually refers to 10m bits, which are also 10*1024k bits.

Optical fiber 100m network speed is 100Mbps = 100mb s = 100 8mb s = note 1b = 8b), that is to say, the theoretical maximum downlink speed of optical fiber 100m network speed can reach or 12800kb s), and the actual use is generally around 10mb s or 10000kb s.

Note: The speed measured by the internet speed test software or app is only a reference and cannot be used as actual data, but you can turn off all the programs on your computer and take the speed test separately several times to find the average as the most recent reference.

At the same time, your computer's network card and the router or optical modem also have a certain relationship, now the network card and router (wired part) are generally 10 100M self-adaptive, that is, the highest 100MB s, generally not up to the highest, 80% is good, and the quality of the optical modem also has a certain relationship.

Ordinary network cables can also go to 10Gbps LAN.