Huawei Honor 2 quad core connected WLAN has a wireless router at home.

You can see if you can enter the configuration interface of the router, go in to see if the router has uplink and downlink packet traffic, no traffic or very little traffic, this means that the router is not connected to the external network, you just establish a LAN relationship with the router.

The network cable out of the cat is plugged into the WAN port of the wireless router, and then the computer is connected to the wireless router, enter the wireless router on the browser, and then the administrator password is admin, and then click on the setup wizard Step by step, if your home is broadband, choose the PPPOE mode, and then enter the broadband and password Save Finally, set the wireless network password.

1 Check that your phone's Wi-Fi settings are correct.

2. Check whether the service is activated.

3 Check if the wireless router is set up correctly (if you can) 4 If there is a problem with the wireless driver or module.

5 Access device failure.

6 None of the above operations work, root or flash.

Does your WLAN have a password? If you have, enter the password connection in the settings, if it has been connected, check the settings of your router, if there is no problem, I don't know, or you go to any other public place where there is wifi to try it, is it a problem with the mobile phone, and then you can try to brush a machine or something.

1. Check whether the wireless network settings of the mobile phone are correct2. Confirm whether the service is enabled3. Check whether the wireless router settings are correct (if possible) 4. Whether there is a problem with the wireless driver or module5. The access device is faulty6. The above operations are not possible, root or flash the machine.

1.Click Settings to find the Wi-Fi option.

2.After clicking on it, the phone will automatically scan for nearby wireless networks.

3.Choose the wireless network you want to connect to.

4.If you don't have a password, you can connect directly, and if you set a password for the wireless network, you need to enter a password.

Have fun surfing the web.

Buy a wireless router, connect to your broadband, and log in to set the network parameters correctly.

1.Buy a router (if the laptop needs to use wireless Internet access, buy a wireless router) and set the corresponding network parameters;

2.The router is a device that sets up a LAN to achieve network sharing, and the general connection and setting methods are as follows: connect the network cable out of the broadband cat to the WAN port of the router, and connect each computer to the LAN port of the router (if it is a laptop computer, you should also use the network cable to connect the car to destroy a router and then complete the parameter setting), the IP address of the computer network card is set to be automatically obtained, and the address bar of the computer browser is entered yes, specifically to check the network parameters obtained by your computer network card, Log in to the router through the IP address of the gateway, generally the username and password are admin, select the WAN port settings, and set your broadband account and password to the PPPoe mode;

3.Then enter the router's WLAN settings or wireless device quietly provisioning, there is a wireless network name or SSID, there is a default can also be set automatically, and then enter the wireless security settings, there is a wireless encryption method selection and password setting, set your wireless signal encryption key;

4.If the laptop uses wireless Internet access, the operation is as follows: right-click the online neighbor - properties - right-click the wireless network connection - view the available wireless network, click your wireless network name in the searched wireless network - connection, and enter your wireless network key for verification, after passing the verification, you can connect to the wireless router to surf the Internet normally; If it is a wireless terminal such as a mobile phone or tablet, the same principle is the same as above, and it can also be used after searching for wireless signals and entering the wireless network key connection;

5.Generally, families use routers with wired router in seventy or eighty yuan, and wireless routers are slightly more expensive, requiring about 150 yuan, and it is recommended to buy network products that use TP-Link or D-Link, with stable performance and high cost performance.

It can be connected to an optical modem or a wireless router.

The problem may lie in the telecom IP restrictions, at present, China Telecom in many places is strictly restricting individual users from accessing multiple computers, one computer and two computers are different from the Internet, you had better call**10000 to ask the customer service whether the broadband installed by themselves is restricted.

Also: How many computers do you have at home? Can they all be connected to the Internet at the same time?

If you have a laptop, use the wireless network card to connect to the Internet and try to access the Internet, if you can get on the phone, you should be able to get on it. Are you talking about a customized wireless modem or a wireless broadband router that you bought? Telecom custom modems generally have strict IP restrictions, and may not be able to access multiple computers at the same time.

Can I connect to the Internet with a computer connection? If the computer can and the mobile phone can't, check if the phone automatically obtains the IP address.

Your cat comes with a routing function or a cat and a router.

Set --- tick the Wi-Fi --- automatically scan your router --- see your wireless router name--- then click Connect --- enter the password --- automatically connect, OK

The router is connected to a higher-level router and can be relayed or bridged.

The IP range of the LAN port of your router is different from that of the primary router. The DHCP service is not bridged.

Modify the LAN port of your router to have the same IP range as the main router, but the gateway is different, and if DHCP is turned off, the same SSID and PSK are the trunk.

1. Turn on WiFi2 and click on the name of the WiFi access point you need to connect to. 3. After entering the password, hide the input method and you will find "Show password" and "Show advanced options". 4. Check the blind wheel pin - show the Gao Tong skill-level option.

5. Pull down and "IP Settings" will appear. 6. Change the DHCP in the option to --static. 7. After changing to static, there will continue to be several items below, and the way to fill in is as follows:

IP address: The IP address of your mobile phone, which can generally be between 1-255, and cannot be set to the same IP address as any device under the route) == Gateway: The IP address of your router (the default IP address of most routes will be = network prefix length:

No need to modify == domain name 1: the IP address used by the wifi access point, generally or, the specific grinding game should refer to the settings on the route == domain name 2: the same as domain name 1.