Migrating into optical fiber, there is a cat without routing function, and then a router and then a

This is very simple, the same route, just change the connection type of the original WAN from the original 3rd to the 2nd, and fill in the IP address of your migration. (below).

1.Dynamic IP The IP address is automatically obtained from the DHCP server.

2.Static IP uses static IPThe IP address provided by the ISP to access the Internet.

PPPoE is a common method for XDSL connections.

There are no special restrictions on routers.

The key is that your cat is more than just a cat. Or you can't use it.

If the computer does not exceed the number of ports of the router, the number of routes is not reached. For example, four, eight. You don't have to switch to the machine anymore.

If it is exceeded, add the switch.

Use a valid username and password to get in.

Just follow the wizard configuration and you're good to go.

Optical fiber is generally used to fix the IP.

According to you, yes!

But the best way to do it! After the fiber comes in, there is a fiber box, and the fiber box converts the wire head into our commonly used crystal head, and it can be plugged in directly!

No need for cats! Fiber --- Fiber Box (Fiber Converter) - Routers --- Switches.

First of all, what you said is okay.

In fact, if it is a machine that does not need a switch, it can be connected directly to the computer, and you can go directly to the Internet without setting anything.

1. Not necessarily, it depends on whether the modem supports the dialing function, the old modem does not have the dialing function, and the new modem has a dialing function and also comes with a wireless function.

2. There is no dialing function. Because the switch itself does not have a dial-up function, no matter how you connect to the switch, you can only play a transfer function, which obviously wastes the switch, or only one computer can connect to dial-up Internet.

In this way, you can only add one more router, set up a password on the router, and then connect to the switch, use the switch to distribute the network, and realize multiple computers to access the Internet.

3. If the modem itself supports the dial-up function, as long as the settings and passwords are set on the modem, and then connected to the switch, the network is distributed with the switch to realize the Internet access of multiple computers.

1.Connect the network cable to your computer, check the back of the router, and find out how to log in and set up the router.

2.Enter the password on the webpage on the computer to open the router settings interface.

3.Once the login is complete, we will directly select Auto Capture here.

4.If the option to access automatically is unsuccessful, you can go to the advanced settings. Review the WLAN settings and follow them.

5.Since the telecom optical modem does not need broadband and password, it can also be set up with a static IP.