Fire engineer exam approaching, are there any good tips for preparing for the exam?

Hello, we are happy to answer your questions.

Practice more and solve problems (October).

The fire exam questions are flexible, which requires us to practice more before the exam, simulate more + do real questions. At this stage of practice, don't look for some basic chapters and fill-in-the-blank multiple-choice questions, choose a certain depth and a set of mock questions, conduct mock exams according to the requirements of the exam time, and carefully analyze the wrong questions after each set of questions, so as to draw inferences from one another. You can also take out the past year's past papers and do them carefully, and be familiar with the question type, difficulty and ideas of the past questions.

Prepare and answer the past questions (November).

Before the test, plan and arrange the place to eat and lodging, prepare the tools and admission ticket, and calculate the distance and departure time of the test room. I can't understand people who are late for the exam, I can only think that you didn't study well enough, and the exam is just to feel the atmosphere and question type of the exam. Otherwise, how could he be so irresponsible to himself, usually studying hard day and night, fighting for hundreds of days, and pinching this time after the exam.

The night before the exam, be sure to verify whether you have all the required things such as ID card, admission ticket, test center, 2B pencil, eraser, watch, etc. (it is recommended that you buy a mechanical watch during the exam, **You can buy one for more than 20 yuan, it is very important to master the time during the exam, especially the case). Check again before going out in the morning, send the test papers and answer sheets, don't rush to do the questions, fill in the exam information (name, admission ticket, etc.) first. Relax and answer questions without being influenced by other circumstances.

Finally, I wish you all the best of luck in passing the exam.

You can read more formulas, answer templates, etc., which are suitable for reading before the test and memorizing some calculation formulas.

Quick learning for the first pass

Sort out the context and important content of each chapter to further understand and understand the knowledge points learned.

Combined with textbooks and notes, the first-level fire engineer examination will first mark out the key and difficult knowledge of each chapter with a highlighter or colored pen without omission, and then write down these important knowledge layer by layer in the form of tree diagram (that is, curly braces and brackets) or draw ** on 16 large sheets of paper, repeatedly understand them, and briefly note the solution ideas of important exercises next to them.

The second pass begins to memorize on the basis of understanding

Carry the notes you have written with you, and repeatedly recite the concepts, theorems, formulas, properties, characteristics and other key and difficult contents that you have summarized and written down.

Try to recall the third time

Rewrite your notes so that you can recall them clearly by simply abbreviating concepts, terms, and numbers, rather than writing down specific content. If you can't recall the content, write down the details. Repeat it over and over again.

Fourthly, build a knowledge network and think about the connections between knowledge and knowledge

Network diagrams (curly braces, parentheses, **, etc.) help us sort out the hierarchical relationships of important concepts, theorems, formulas and other important knowledge points in each chapter at a glance. Due to the familiarity of the content and the proximity of the spatial distance, we will suddenly realize the internal connection between the knowledge points within each chapter, as well as between the knowledge points of each chapter before and after. This feeling will make us ecstatic.

We're going to put our findings on this network diagram in pointy and simple terms.

Mistakes in the preparation of first-class fire engineer exams.

One: It's too slow to watch it for the first time

Many candidates in the early stage of the review of the first-level fire engineer in the spirit of the fast but not up to the mentality, in order to pursue refinement, fine and slowly read, but do not know, the first time to read the textbook should be briefly read, do not drill the horns of the horns have been entangled in a certain knowledge point. The main purpose of reading the textbook for the first time is to read through the whole book and have a general understanding of the knowledge points of the entire textbook. The knowledge points are always interconnected, and some of the content that you can't read in the previous chapters may be clear at a glance after reading the knowledge in the later chapters.

Two: It's too coarse to look at it the second time

After you have a general understanding of the knowledge points of the first-level fire engineer exam, you can no longer look at it roughly like the first time, but you should pay attention to details. As the saying goes, details determine success or failure, and during the exam, candidates often get those test points that they think are not important, so many candidates who are not careful are easy to suffer big losses. The second stage of review requires candidates to combine the textbook with the exercises, and understand the knowledge points of each exercise thoroughly.

Three: The review is too blind

When the first-level fire engineer review enters the intensive period, many candidates will feel confused because they have read the textbook many times and done a lot of exercises, and they don't know what books to read or what questions to do, which leads to the review becoming blind. In the intensive stage, candidates need to find out their own deficiencies through the tactics of the sea of questions, and then correct them, so they must take notes during the review process, mark the points that are prone to mistakes, and strengthen the practice of weak links.

1. Hello, the registered fire engineer has a total of three subjects, and the results of the three subjects are valid for three years, which means that you can pass the three exams within three years. The three exams are "Fire Safety Technical Practice", "Fire Safety Case Analysis", and "Comprehensive Ability of Fire Safety and Safety Technology".

2. The examination questions of "Fire Safety Technical Practice" and "Comprehensive Ability of Fire Protection Technology" are objective questions. Multiple choice questions require you to choose the most appropriate option from the alternatives as your answer. In each question of "multiple-choice questions", there are two or more options that match the meaning of the question, and no points will be awarded for incorrect selection; Missed selection, each selected topic is scored.

In all multiple-choice questions, there are 80 multiple-choice questions, each worth 1 point; 20 multiple-choice questions, each worth 2 points.

3. The 15-year question type of the "Fire Safety Case Analysis" subject test is 6 subjective questions, and the subjective question is a comprehensive case analysis question; After 16 years, the question type is 2 multiple-choice questions + 4 subjective questions, and the subjective questions are comprehensive case analysis questions. The total marks of the three subject papers are 120 points. A minimum score of 72 (inclusive) is required for each subject.

A few tips on preparing for the Fire Engineer I exam.

To prepare for the exam, you should pay attention to the method and study efficiently. Whether the method is appropriate or not directly determines the success or failure of the exam. Each discipline has its own laws and characteristics, and it is necessary to grasp these characteristics and achieve twice the result with half the effort. Give a general advice:

1.To complete the class content with high quality;

2.Be sure to review the content of the teacher in time after listening to the class, especially the after-class practice questions of each chapter, you must do it yourself when reviewing, not just watch, because there is a big difference between being able to understand and being able to make it independently.

3.When completing a topic, we should consider the knowledge points examined by the topic, what type of question type it belongs to, and what kind of good ideas, methods, and templates there are;

4.The study time should be reasonably arranged, and the study should not only look at the foundation or professional practice for a long time, and the study should have a reasonable match.

One: Reading is not detailed, not thorough, swallowing dates, rote memorization, and no understanding.

Reading books is always guided by the syllabus, and the knowledge points outside the syllabus are ignored, resulting in more points and heavy losses when encountering knowledge points outside the syllabus when taking the exam. There are many knowledge points in the first-level fire engineer that require us to memorize comprehensibly, rather than rote memorization, which will waste a lot of time and result in half the effort. Therefore, candidates must learn to understand memorization and integrate it with actual work.

This is beneficial and harmless for the exam.

2. Blindly divide the key and non-key points, invest too much energy in the key parts, and hastily pass the non-key parts at a glance.

What you get in the exam is the key point, and what you can't get is the non-focus. Therefore, candidates must make a review plan before preparing for the exam, and determine the key and difficult points according to the content of the exam syllabus. In order to facilitate contentious revision.

3. Passive acceptance when doing mock questions, not good at combining teaching materials, drawing inferences from one another, and not delving into the reasons for vague questions, so that the next time you encounter the same topic, you will make the same mistake.

This situation is a situation that often occurs to candidates, so when preparing for the exam, we should conduct in-depth research on our own ambiguous and important problems and solve them, so that we will not lose again in the examination room.

Fire engineers have a lot to learn, more than 1,200 pages of three textbooks, and more than a dozen specifications, and the content of each exam question may cover three textbooks and all specifications, so everything must be understood in order to take the exam.

First, the mentality of preparing for the exam should be adjusted well.

First of all, self-confidence is a must, many candidates because they have not taken the fire test, plus see so many tests can not be taken, it is inevitable that there will be some negative emotions in their hearts. At this time, if you encounter a little difficulty in learning, it will become the last straw that breaks the camel's back. This is why many candidates give up the fire exam.

Therefore, self-confidence is very important, you must know that those candidates who successfully pass will not know everything at the beginning, everyone is accumulating bit by bit, step by step forward.

Secondly, nervous and anxious emotions are also more common in studying, especially in the period before the exam, the time is tight and the task is heavy, it is inevitable to feel irritable, at this time, everyone should give themselves appropriate relaxation, you can go out for a walk and listen to songs, which will make your mood feel a lot more relaxed.

2. Improve the speed of doing questions.

Many people will wonder why the problem of speed should be emphasized in the preview stage, in fact, candidates who have taken the exam should understand that the speed of doing questions is not something that we can mention if we want to improve, which is subtly and slowly cultivated in the usual study;

Therefore, at the beginning of learning, everyone should be prepared to ensure that each practice problem can be completed accurately and quickly.

3. Strong willpower.

For many candidates with a poor foundation, the first time they read the textbook or listen to the class, they will feel a little difficult to understand, they don't know what the teacher is talking about, they don't know what the textbook is saying, and many candidates have retreated at this time.

In fact, no one can learn at one time, they all have to have tenacious perseverance to persevere, and they can't stop learning because it is difficult or boring, which is not only a waste of time but also irresponsible for themselves, so it is better to turn around and study seriously no matter how much you complain.

Good exam preparation habits can make everyone's study tasks a lot easier, and these need to be developed in the preparation stage of fire protection preparation.

On the road to preparing for the fire engineer exam, the biggest enemy is yourself.