My hard drive will have a squeak noise when the computer is running certain actions, how to explai

It's hard to say, my hard drive has been used for four years, and it squeaked when I first bought it, but it has been fine until now.

It's normal, it's like that when the hard drive takes a long time.

This is a normal sound, and it is recommended that you run the defragmenter that comes with your system. It is recommended to run every 3 months. This will help the hard drive!

That's the sound of the disk in the hard disk rotating, and most hard disks will have a sound, but some of them are big and some are small.

Very normal. When the hard disk is running at high speed, it will make a squeak sound, or a sizzling sound, or other sounds are reasonable, it is the head that reads the information on the disk, and when it shuts down, it wants to save the system information, so the hard disk will also read and write the disk, and the hard disk light will always flash red and keep flashing.

The same is true for new hard disks, some are loud, some are small, it depends on the individual of the hard disk, even if it is the same model, the same batch of products, the sound volume will be different.

You are Seagate's disk, and the sound of this disk is already loud. No need to worry. Again, the sound of the big hard disk is relatively loud, I am a Western Digital 250G disk, that sound, like driving a tractor, I have just bought it for about two months.

Only when the hard disk suddenly makes a different abnormal sound from the past, such as the dull sound of the magnetic head hitting the disk body after booting, which is very harsh, and accompanied by a blue screen, when the program is read to error, you need to pay attention, there may be internal problems, there is a possibility of bad sectors.

Your condition is completely normal. Please refer to it.

If you want to replace it quickly, or let it be used as a slave disk, and add a new drop as the main disk, the hard disk is too broken :)

The boot speed has nothing to do with the hard drive, but when you say the hard drive squeaks, maybe it's because the hard drive is broken, or there's too much dust

Add a new hard drive too! I think it's better to change the block, 500g is good, and it's not expensive now

I think it may be that your hard drive is old, so it is recommended to change to a new hard drive and make the replaced hard drive into a portable hard drive.

If you don't want to change the hard disk, buy a hard disk and use it as a slave disk, and wait for the day he dies.

By the way, it seems that the hard drive has a three-year warranty to see if you can still find a ** business.

The part where the crunching sound occurs is generally the head spiral arm.

There are generally three reasons for this problem, and it is recommended to stop using it immediately and find a professional organization like 51recovery to test it.

1) The power of the power supply is insufficient, the head arm will consume a relatively large amount of current in the movement, and this situation will occur if the power supply is insufficient.

2) Hard disk aging, the hard disk is recommended to use the circuit board downward horizontal installation method, as far as possible moisture-proof and shockproof, if the hard disk is placed vertically or upside down for a long time, due to the effect of gravity will accelerate the aging of the action mechanism of the hard disk.

3) Problems with the design of the hard drive.

From your description, it is a problem with the head, and it is recommended to back up important data in time.

It's that your hard drive is aging.

There's no need to change it, just change it to a new one.

Categories: Computer, Networking, >> Hardware.

Problem description: Recently, I just replaced a hard disk, but accidentally touched the main chassis, very light, the hard disk immediately stopped rotating, sometimes in the open some web pages to show exaggerated slow hard disk "squeak" screaming horror, is there something wrong with the hard disk? Usually, as long as you don't touch the chassis, everything is fine.

Analysis: When the hard disk is working, the magnetic sheet inside is rotating at high speed, 7200 times per minute, and the most taboo thing is the vibration in operation, which is likely to cause the head to scratch the magnetic sheet, which will cause bad sectors.

1. Normal sound, there is a slight sound when the hard disk is running when the internal mechanical movement is done.

2. The fixing screws of the hard disk are loose, which causes the vibration of the hard disk to run and the resonance of the chassis shell, and the sound is loud.

3. Bad sectors appear in the hard disk, and whenever the head reads the bad sectors, it will be hoarse and loud, and it should be dealt with as soon as possible to prevent the increase of bad sectors.