How to make a C disk into an image file and engrave it into a CD

In fact, you don't need to make optical discs, now the hard disk is very large, you can directly use one-click recovery software to back up the C disk to your hard disk, which is faster than the optical disc, and you are not afraid of problems like disc wear and tear (you can't read it, of course you can't use it)!

If you really want to burn a disc, then you need a *** disc, because the C disk image file you make is very large (at least 2G), and it takes a lot of technology and trouble to compress!

The best way to burn is to open the ISO file with a ghostXP disc, open the ISO file with compression software, and then put the system image in it (remember the file name, such as delete, add the image you made, remember, the file name must be the file name in the original ISO file (to change to, so that you can use it directly, or the software integrated with the disc can't find the file!)

Mind: 1. You'd better use the latest version of ghost; Make the system image to your hard drive;

2. It's best to use the default settings of ghost when backing up, so the C disk image is hidden, not affected by human damage or misoperation of normal operation, and of course it can also avoid the interference or destruction of many viruses!

It's too much trouble for you to do that. Teach you a trick It's very simple. Only two pieces of software are needed, one is the driver wizard. The other one is maxdos.

It's a very user-friendly software. (This can be used as a back-up (or not) to prevent the hassle of driver installation in order to prevent the system files you backed up from being corrupted.) ）

MaxDOS is meant to be a part of your system. You can recite it to a disk other than the system disk. In this way, even if there is a problem with the system, it can be easily solved.

The process of backing up your system is the process of restoring backup files with MaxDOS

Probably partiton->to image creates a backup file in a partition outside the system, and the next step will be to back up the image file by default.

The problem will be solved quickly.

You can use ghost software, and you can also use it without burning a disc.

After installing all the drivers and software, make a ghost backup.

There are a lot of nostalgic moments in our lives, and we usually record them by shooting them in the best way. But where to save it? If we have a *** projector at home, we may want to burn it to a disc and watch it on our home TV.

How do you get it? It's just to teach you how to make it.

Most of the files on the disc are optical disc image files, referred to as ISO, and the disc image files are made by burning software tools.

Specific steps:

1.First of all, we have to prepare**a burning software**, open the software, find the option to add**, and then add what you want to make**, after the addition is completed, you can use other functions of the software.

2.Find the template setting function in the CD menu of the software and set the template. The option buttons of each software may be in different positions, but the functions are almost the same, you can find several styles of menus to choose from in the *** menu production, select a custom menu, and we can establish a menu with our personal characteristics.

3.We can burn next, when burning, we have to find the burning settings, click Burn to *** to find the burning settings. I.

You can choose to burn to ios files, or you can choose to burn the disc drive, which is directly burned to the disc, we need to make the ios file first, and then we can burn the disc.

4.Once we have created the iOS file, we can start the final step of the process. We first find the tool options of the software and select Burn Disc Image, and then we will jump to the options menu of Burn Disc Image, which has options such as writing speed, writing method, etc.

5.After adding the ISO image file, select Burn. Select Browse to find the ISO file we want to burn and open it.

Just put in the blank disc we want to burn and burn it. We don't need to do it ourselves, the software will handle it automatically. Another point to say is that we burn discs in two ways, one is the erasable way, the other is the non-erasable way, usually we often use the first way.

Of course, most of the movie disc type liters we buy are non-erasable and have a certain degree of protection, which is used to prevent piracy.

Once the burning is complete, we can be on the projector.

I believe that after reading the disc image burning, you understand how to burn a disc, and you can't wait to give it a try?

You can get it for free

Method steps.

1. First install an UltraLiso software, then run UltraLiso, and open the CD image file converted to ISO in Ultraliso.

2. Select all the files in the folder opened by Ultraliso, and then move them to it.

4. Define the name of the file you want to save and the storage path of the file.

5. Click the save button, and the required file has been made into an image file.

This file can easily turn the folder into an image file, I open the program to show you, and then save it as an ISO file.

With UltraISO, you can save the folder as an ISO format disc image.

Use the floppy disk to pass this software, directly pull the file to the designated area and save it.

1. Use the tool under UltraISO -> Format Conversion -> The source file is the GHO file to be converted, and the target file is ISO. Click OK.

2. Although UltraISO can be packaged into ISO, it doesn't make any sense.

Engraved into a disk must not be started.,Ghost file is only part of the ISO file,Ghost+ boot boot file and some tool software are ISO,Otherwise, it can't be started.。

3. How good it is to directly download the ISO image file on the Internet, and many of them can be directly engraved into a disk.

4. The ghost image file can be placed on the boot USB flash drive that has been made, and the ghost program can be executed to select this ghost image file to restore the system after starting. You can also put it in the back disk of the hard disk, and you can use Ghost to restore the system at any time, or use other CD-ROMs to install the system after booting it up.

With the tools under Ultraiso -> Format Conversion -> The source file is yours*. gho file, the target file is *. iso。Click OK.

There are two ways to mirror an optical disc system:

1. Use burning software to produce. There is an option to make an ISO disc image in the burning software, for example, there is an option to make a disc image in the disc burning master software, select this item to make the disc into a disc image file and save it to the hard disk;

2.Use disc imaging tool software, such as Floppy Disc Pass, etc., in this software there is also an option to make a disc image, and you can also make a disc into a disc image file by selecting this option.

Open the disc system with UltraISO software and choose to burn the disc image.

2. Put the disc in the optical drive.

3. Open UltraIso

4. Click File - Open to open the GHO file, as shown below:

5. Click the icon pointed by the arrow in the above picture to start burning. As shown below: