-
Anonymous users2024-02-06Where are you, what channel are you searching for?
-
Anonymous users2024-02-05First of all, we must analyze what is the reason why TV becomes black and white, and there are different solutions according to the reasons, which are explained one by one below.
1. The user mistakenly presses the button of the remote control or the TV, which changes the standard of the TV (such as switching to the NTSC system or other morning song system), resulting in the color becoming black and white.
Solution: In this case, you can generally use the remote control to operate, press the menu button to enter the system settings, find the color system, and select [PAL system] or set it to [Auto] after entering to solve the problem and return to normal.
2. There is a problem with the input of the TV signal source, such as the connection line between the TV and the set-top box is loose or the contact is poor, resulting in the TV becoming black and white.
Solution: Reconnect the connection line between the TV and the set-top box and fix it.
3. There is a problem with the current program source, that is, the current program is a black and white picture.
Solution: You can change the program channel.
4. The hardware of the TV or set-top box is scattered, resulting in the color becoming black and white, such as the failure of the color decoding circuit inside the TV, and the color signal cannot be interpreted, so it can only display the black and white picture.
-
Anonymous users2024-02-04How to come to LCD-40LX450A to watch online TV at Sharp:
-
Anonymous users2024-02-03Link to the network cable, there is a network setting in the settings, select automatic get, and wait for a while. There is intelligence on the remote control, press to see it.
-
Anonymous users2024-02-02How to connect your Sharp LCD-52LX840A TV to a wireless network:
1. Required conditions: networked wireless routers and TVs;
router) TV).
2. Start the TV and use the remote control to enter the system setting interface of the TV;
3. Under the system settings interface, select "Network Settings" on the left; Then select "WiFi Direct" on the right;
4. After selecting the wifi direct connection, you can see the nearby wifi signal, select the wifi signal where the user is located, click to enter the password, and you can connect;
5. After the connection is successful, the router will automatically assign an IP address to the TV, and after the TV obtains the IP address, it means that the TV has been successfully connected to the wireless network.
6. At this time, the user can exit the settings and return to the network TV interface of the TV, and then you can select and ** network TV programs.
-
Anonymous users2024-02-01Currently Sharp does not support wireless.
It's good to feel good.
Zhicheng broadband network TV.
How to wipe your computer screen.
After using the LCD monitor for a period of time, you will find that a layer of dust is often adsorbed on the display screen (it is more obvious after turning off the LCD), and sometimes various water stains are accidentally sticked, which will definitely greatly affect the visual effect, how to clean it? >>>More
2. Check whether the wireless network card driver is successfully installed in the computer device manager, and check whether the wireless network card has been started, the method is to click "My computer (win7 system is "computer") on the desktop, and then select "Properties" - Hardware "" - Device Manager, there should be a wireless network card adapter under normal circumstances. >>>More
There are two types of ways to connect Konka smart TVs to the network, one is a wired connection, and the other is a wireless connection. In fact, as long as you follow the installation steps and get it done step by step, this situation rarely happens. >>>More