In the regulations on fire warfare evaluation, there is a point in the principle that the evaluatio

The 2018 fire engineer examination is not limited to majors, any major can apply for the examination if the conditions are met, and obtain the corresponding fire engineer qualification certificate issued by the state, and the professional and technical personnel who can be engaged in fire protection facility testing, fire safety testing and other fire safety technology work with this certificate.

Why are so many people rushing to apply for the fire engineer exam? What are the advantages of a fire engineer?

1.Talent is in huge demand.

According to the Ministry of Public Security Fire Bureau, in the next 3 to 5 years, China needs nearly 500,000 registered fire engineers, a wide range of demand, all walks of life, all important fire protection responsibilities of the unit and related intermediaries, all need to be equipped with a corresponding number of fire engineers to obtain qualifications.

2.The difficulty of the exam is decreasing year by year.

Since the first examination of a first-class registered fire engineer in 2015, the pass rate of general practice that year is only, the pass rate of general practice in 2016, and the pass rate of general practice in 2017 is 3%-5%.

3.Grade management is relatively relaxed.

The examination subjects of the first-class registered fire engineer are three subjects, and the rolling management method of a three-year cycle is implemented; The examination subjects for the second-level registered fire engineer and the first-class registered fire engineer exempted personnel are two subjects, and the rolling management method is implemented for a cycle of 2 years; This policy helps candidates to have more time to revise and can guarantee a higher pass rate.

4.There are many positions and high salaries.

Registered fire engineers can be engaged in business managers, project managers, fire protection engineers, budget officers, fire engineering project managers, water and electricity engineers, fire protection constructors, constructors, fire protection project managers, fire engineering budget officers, mechanical and electrical engineers, safety directors, safety consultants, etc.

5.The certificate is of high value.

The fire protection engineering major belongs to the public security technology category in the engineering category, of which there are 6 majors in the public security technology category, and the fire protection engineering major ranks first in the public security technology major, and ranks 44th in the entire engineering category. Among similar majors, the high ranking of the fire protection engineering major has created a high gold content of the registered fire engineer certificate.

6.Employment is good.

Fire engineer is the only one in the country that can be registered to the age of 70 access class certificate, according to the survey of the north, Shanghai, Guangzhou and other first-tier cities affiliated costs are considerable, now.

Second- and third-tier cities are also gradually understanding and implementing, and if you do a full-time job, it is a transformation in many friends' lives.

Hello, glad to answer for you; About the First Class Firefighter.

For self-study or class registration, you can refer to the following specializations.

There is no best way to take any kind of exam, only to find it.

Hello, it's a pleasure to answer for you.

The difficulty of the fire engineer exam.

There are three DAOs in the exam

1. Pay attention to the first-class cost work.

The syllabus of the exam.

Use stems from familiarity with the theoretical framework and.

Review the knowledge points on a regular basis. The outline has a lot of highlights, so it's worth looking into.

2. A set of teaching materials for repeated memorization. However, textbooks alone are not enough, and although there are people who have only read textbooks, such people tend to have a good foundation.

3. Textbook supplement and supporting mock test, the test center of this book is relatively concentrated, which is conducive to improving efficiency. Textbook supplements may not be available in every bookstore, so you can consider ordering them online; Other tutorial books, if you are just starting to prepare for the exam, or if the foundation is really "poor", it is recommended to prepare some.

4. Analysis of past questions, which is a must for every candidate. Past papers have two obvious uses: one is as a mock question and the other is as a research.

When making a study plan, it is recommended that you first do last year's past papers to understand your basic skills, so that you can prepare for the exam more focused, and then start systematic review. Every time you review, do a round of past questions to clarify the direction of the review and the idea of the proposition, so as to check and fill in the gaps in a targeted manner. After 2-3 repetitions, I believe you will be able to take the test with confidence.

5. It is recommended to prepare a set of practice books. Do the practice questions on the premise of understanding the real questions thoroughly; When doing each question, you need to know the topic of the question, first, to save time, and second, to quickly and effectively improve the level of test-taking.

6. Mock exam papers, to do 2-3 sets, the role of mock questions is not to improve the level of knowledge, but to improve the ability to take the test.

1. Commute to and from work and read through the whole book e68a8462616964757a686964616f31333431373838

Many candidates are very busy at work, and they have a lot of trivial things when they get home from work. Then the only way to read is when commuting to and from work by car or subway, so that you can read for nearly two hours a day to and from work.

2. Summarize the key points.

3. Simplify the complex.

Cut the complicated and simplify, and the key to refining knowledge is to refine"Score points"and then make accurate memorization. As for the method of refining the scoring points, the best thing is to summarize from the past past papers.

4. Pay attention to the week before the exam.

A week before the exam, candidates can study at home. Although this week is not a long time, I can definitely ensure that I review the key points again, and at this time, the review must be accurate and memorized. Previously summarized"Score points"You must ensure that you can't remember a single word badly, write if you can't memorize it, write it over and over again, and you can always memorize it.

From this Monday until the end of the review, it is best to be in a state of study every day, so as to eliminate the tension of taking the test to the greatest extent and ensure that you can perform normally or even overperform.

The fire engineer exam is more difficult, and the preparation for the exam requires a reasonable plan, and the scientific learning method lies in understanding and memorizing, and rote memorization is not possible.

1. Regular learning status.

Maintaining a regular study state before the exam is crucial to pass the exam, which requires candidates to spend about three hours a day on revision, focusing on the high-frequency test points of each subject and the knowledge points of fire engineers that have been published over the years. And pinch the points to do the fire engineer past questions, and study the knowledge points in the past questions. The mistakes accumulated in the past should be reviewed regularly, and the combination of the three should be gradually cycled to gradually advance the learning progress.

2. Upward psychological state.

Mood directly affects the state of learning, many candidates are prone to anxiety before the exam, and the questions cannot be done, the book cannot be read, and the precious preparation time is wasted. In order to improve the efficiency of review and preparation, candidates need to maintain a positive learning attitude, face various problems in preparation with an invincible mentality, and overcome the problems one by one.

3. Healthy physical condition.

Preparing for the fire engineer exam is a mental and physical thing, as the so-called body is the capital of the revolution, it is important to maintain a healthy physical condition before the exam.

Some candidates are accustomed to raiding before the exam, reading at night in the last few days, sleeping only three or four hours a day, and studying for a long time is easy to produce brain fatigue, which is not only not conducive to preparing for the exam but will affect the development of normal work and life. Therefore, candidates should try to ensure 7-8 hours of sleep and maintain a healthy body to meet the exam.

Only with a good study, physical and mental state can you avoid worries and go all out to sprint for the exam.

1. Firewall and fireproof partition wall.

The wall used to divide the fireproof partition is always a firewall, and the partition wall used in special places is a fireproof partition wall.

For example: equipment room, fan room, air shaft, front room, stairwell, etc., the characteristics of these parts are:

If you need to open the door, it must be a fire door, any pipeline crossing must be fireproof blocking of the gap between the pipe and the wall, the air duct should be added with a fire damper and 2 meters before and after the fire damper, and the air duct should be protected (the wall thickness is increased, the insulation of the material is not insulated, and the protective layer is added, and the fire air duct is made), and the plastic pipe should be crossed, in addition to meeting the blocking, it is also necessary to make fire prevention treatment on the pipeline (elastic fire retardant ring, protective hoop and other measures).

2. Boiler room.

1) The oil-fired or gas-fired boiler room and transformer room should be set up on the first floor or the outer wall of the first basement, but the normal (negative) pressure oil-fired or gas-fired boiler can be set on the second basement floor or the roof. The normal (negative) pressure gas boiler installed on the roof should not be less than 6m away from the safety exit leading to the roof.

Boilers fueled by combustible gas with a relative density (ratio to air density) of not less than shall not be installed underground or semi-underground; (Relative density of natural gas.)

2) The evacuation doors of the boiler room and transformer room should be directly connected to the outdoor or safety exit;

3) The gas boiler room should be equipped with first-class pressure relief facilities (10% of the area between boilers, boiler specifications);

4) The oil-fired or gas-fired boiler room shall be provided with an independent ventilation system and shall comply with the provisions of Chapter 11 of this code;

The fuel supply pipelines of boilers and diesel generators installed in buildings shall comply with the following requirements: Automatic and manual shut-off valves shall be installed on the pipelines before entering the building and in the equipment room.

3. Fire elevator configuration.

Including the load capacity, driving speed, interior decoration materials of the car, the configuration of communication equipment, as well as the waterproof measures taken by the control cables, wires and control panels of the fire elevator.

The fire elevator shall comply with the following regulations:

1. It should be able to dock on each floor;

2. The load capacity of the elevator should not be less than 800kg;

3. The running time of the elevator from the first floor to the top floor should not be greater than 60s;

4. Waterproof measures should be taken for the power and control cables, wires and control panels of the elevator;

5. At the entrance of the fire elevator on the first floor, a special operation button for firefighters should be arranged;

6. The interior decoration of the elevator car should be made of non-combustible materials;

7. The inside of the elevator car should be set up with a special fire intercom**.

The content of the first-level fire engineer exam is not simple, and if you want to pass the exam successfully, you must firmly grasp the fire engineer exam center. Candidates should not be afraid of trouble, and often review and summarize the content they have learned to deepen the impression in their minds. In order to make your memory better, you can read aloud when you memorize the key content, so that the impression left in your mind is more profound, so that you can save review time, review without blindness, and do not waste time.

The registered fire engineer exam lies in building fire prevention and fire protection facilities, and the teacher of exam 100 kindly reminds that as long as you break through these two chapters, there is no problem in passing the examination of technical practice and comprehensive ability. Case exam safety management + building fire protection + fire protection facilities, safety management and industrial fire prevention are relatively easy to score, these two scores as much as possible, and the others are guaranteed to get points for each question, and there is no problem in passing.

The printing time of the 2018 first-class fire engineering admission ticket starts in November, and all candidates must keep in mind the printing time of the admission ticket in their province and complete the printing of the admission ticket within the specified time. You can't go to the exam room without the admission ticket, and candidates must keep the printed admission ticket and don't lose it. If you are worried about losing it, you may wish to keep an electronic copy of the admission ticket and print it at any time.

The preparation time for the 2018 first-class fire engineer exam is getting shorter and shorter, and all candidates should seize the time to prepare for the exam and believe that hard work pays off.

You only need to memorize the basic test that you may have.

According to the article I read about similar exam case marking, it should be scanned to the computer, the teacher marks the paper on the computer, each teacher only judges one question, and the score is given according to the answer. Therefore, if you can't see the candidate's name and admission ticket number, including the words you write outside the answer sheet, you may not be able to see it, and you must not change the position to write the answer, and use the arrow to point to the position where you answer the question, because the computer doesn't care if your position is right or not!

I would like to ask, the answer sheet on the first page is not written with the answer, and if the answer is written on the second page, will it give a score?

1. First of all, analyze the relationship between the three subjects

The knowledge system of the three fire protection departments is the same; "Case Analysis" does not have its own basic knowledge, and his basic knowledge is all "Technical Practice" and "Comprehensive Ability"; However, 70% of the data of "Comprehensive Ability" comes from "Technical Practice"; Therefore, the core of the focus is on technical practices.

2. Let's talk about the knowledge span of the fire test.

The fire examination is divided into construction, water supply and drainage, HVAC, electrical, and fire automation control. The fire test is divided into fire protection design, fire construction and installation, fire commissioning, fire acceptance, and finally maintenance and use management.

3. Suggested learning order: technical practice, comprehensive ability, case analysis 4, fire learning, just reading books is not enough, according to the analysis of +18 years of real questions, there are many knowledge points of fire protection are not in the book, but in the norms (national standards), the basis of the question: is the official textbook + main specifications.

The main purpose of reading the textbook for the first time is to read through the whole book and have a general understanding of the knowledge points of the entire textbook. The knowledge points are always interconnected, follow the textbook system to learn roughly, and do not drill the horns.

The second pass should be carefully read and attention to detail. Through the first time of study, we already know the focus and difficulty of the exam, in the second review should have a purpose to learn, and the second time is also a difficult stage, the first time I don't understand the place I don't understand and can't learn, I must solve it in the second time, and combine the exercises to strengthen and consolidate, and break through!

You can choose our institution to choose the question, the accuracy of the question is super high, and there are past questions to practice.