-
Generally speaking, it's impossible, isn't it because you have other antivirus software on your machine besides Kingsoft Antivirus?
Kingsoft Poison and the mainstream antivirus software on the market today will conflict.
It is recommended that you uninstall or format the partition where the Poison 2008 is located and then reinstall it.
Or if your system CMOS settings are wrong, you can turn on the computer and press del to enter the CMOS to view the setting options.
-
It may be that there is a conflict between Kingsoft and a system file in your system. You can try it out with a different version of XP, or you can change it to a soft.
Also, what are the tips when you look at your blue screen? According to what you said, it is recommended to focus on troubleshooting the software first, and if it really does not improve, then check the hardware according to the prompts.
-
Maybe there is a conflict between Kingsoft and some software, I've been using Kingsoft, and I haven't seen it before.
-
There are many reasons for a computer's blue screen, including hardware and software hardware.
Cause 1: The virtual memory is insufficient.
Many users like to make full use of their hard drive space, which leads to insufficient space on the hard disk and miscalculations, resulting in blue screens. Solution: Try not to put too many things on the hard drive, remember to regularly clean up the temporary files generated by the system, and the software programs you don't need.
Or you can manually configure the virtual memory, select Advanced, and transfer the default address of the virtual memory to another logical disk. This avoids blue screens caused by insufficient virtual memory.
Cause 2: CPU overclocking causes an incorrect operation.
Overclocking, in itself, is to achieve higher performance on the basis of the original, but due to overload operations, it causes too many internal operations, which overheats the CPU, resulting in system calculation errors. Solution: When the CPU is to be overclocked, it is best to install a large fan and add some heat dissipation materials such as silicone.
It is recommended that low-end CPUs should not be overclocked, so as not to cause a blue screen if the effect is not achieved.
Reason 3: The memory modules are incompatible with each other.
If there is a problem with the memory module, the computer cannot be started at all, and the screen will prompt that there is a problem with the computer's memory. Solution: Replace the memory with another memory.
Reason 4: The optical drive is opened abnormally when reading the disk.
When the optical drive is reading data, it is opened by mistake, resulting in a blue screen. Solution: Just pop in the disc again or press the esc key.
Cause 5: System hardware conflict.
This phenomenon leads to a "blue screen" that is also relatively common. What is often encountered in practice is a conflict between the settings of the sound card or the graphics card. Workaround:
In "Control Panel" > "System" > "Device Management", check whether there are devices with yellow question marks or exclamation marks, if so, try to delete them first, and restart the computer.
Reason 6: There are too many loaded programs at startup.
Loading too many apps at startup and having too little memory can lead to a blue screen. Solution: Turn off some unnecessary boot auto-start programs.
Cause 7: The application has vulnerabilities.
Some apps are inherently flawed in their design, or use some pirated software that causes these software programs to take up too many resources while running, thus causing a blue screen. Solution: Uninstall the recently installed software and buy a genuine software CD.
Reason 8: Encountered a Trojan horse or virus wide shed attack.
Some users accidentally fall into a Trojan horse or virus during the use of the computer, which will cause the computer to disappear and wither. Solution: Use anti-virus software to detect Trojan horses or viruses.
Reason 9: The software installed on the computer is conflicting.
There are already differences between the old and new versions of some applications, and when you delete the program, you accidentally delete the DLL file, which will lead to a blue screen.
Reason 10: There is an error or corruption in the registry.
Errors or corruption in the registry are the main causes of the blue screen, and if the registry data is wrong or corrupted, it is likely that the "blue screen" will occur. It should be detected and repaired in time to avoid greater losses.
-
There are various causes of the blue screen, and it is enough to find out the cause.
Defragment once after using the computer after a certain period of time; If there is a system hardware conflict, check whether there is a device with a yellow question mark or exclamation mark in "Control Panel" "System" and "Device Management", if so, try to delete it first; Loading too many programs at startup: Do not load too many applications at startup, so as not to exhaust system resources; If you are attacked by an unknown program or virus: check it carefully and take precautions; If the software and hardware are incompatible, caused by viruses, and you need to clean up the garbage, you can use Tencent Zisheng Computer Manager to clean up the garbage.
-
Try it with a different antivirus.
-
"There are many reasons for the blue screen restart of the computer, and it is recommended that you follow the following methods to troubleshoot them one by one:
1.Remove newly installed hardware devices, such as external cameras, printers, and memory including upgrades;
2.Try to click F8 to enter safe mode during the boot process, uninstall the previously installed software, and check and kill viruses in a comprehensive manner;
3.In order to fully rule out the possibility of software or system problems, you can back up the hard drive data and reinstall the operating system;
4.If blue screens continue to occur frequently after reinstalling the system, it is recommended that the machine be sent to a local service center for further testing"
-
Prepare a USB drive and a working computer, and then come back to me.
GhostGhost software is an excellent hard disk backup and restore tool launched by Symantec in the United States, which can realize the backup and restoration of partitions and hard disks in various hard disk partition formats such as FAT16, FAT32, NTFS, and OS2. Commonly known as cloning software. >>>More
You can only go to the map to brush it out.,I'll tell you a few maps that are easy to drop good equipment.,It's easy to drop good equipment in the zombie picture.,It's easy to drop good equipment in the air.,Both of these pictures are hidden maps.,You can take on the task to open.,One task is called Xinda's hammer.,There's also a thing called the Repair Big Magic Array.。 Thank you.
1,If you say that the optical drive doesn't read the disk at all.,It's not okay to set the disc to start.,It's not okay to set it after restoring the out-of-the-field settings.,You can try to put your disk into someone else's good machine.,See if you can read it.。 If you can explain that it is a problem with your own machine, if you can't, it means that there is a problem with the disk. Try again with a different plate >>>More
Bootstrap fix it. to the ** of the system you installed.
Listing Date: January 2010.
Processor: 1 GHz 32-bit or 64-bit processor. >>>More