1000 points bounty!! The motherboard has been changed to an optical drive and cannot be used

First of all, you state that someone else has changed your motherboard, so I want to ask you, what can he change? It's impossible to change the hardware on the motherboard.

Step 2: Discharge the CMOS, this method is used to recover and restore the motherboard BIOS program when it is illegally modified.

Step 3: Since it is said that someone else installs the system, whether the application in the system conflicts with your existing program, the sound card program I saw failed, resulting in the hardware can not be recognized, after the above two steps are completed, if the fault is still recommended that you find a master to install the operating system again, it is estimated that there is no reason to reproduce the fault here, but I dare not rule out If the unfortunate words, please continue to read.

Step 4: Reinstall the optical drive driver again Generally, normal computers do not need drivers, but if you have a problem with your machine, you will have to try, and I hope you can do it.

Step 5: It's basically over, you said at the beginning to let someone else help you make the system, think about your optical drive before it is good, but just in case, everything in the world is possible, no one dares to rule out the fault of your optical drive itself, it is recommended to remove the optical drive and try it on other computers.

The above five points are my accumulated experience, although the sentence is not very smooth Can the reliability of the method restrain your problem But I hope to provide you with effective help, if you can't succeed I hope not to make fun of it, because I am also a piece of cake Finally, I wish you success.

1000 points, haha.

Does not being able to find the optical drive mean that the optical drive cannot be detected at all during the identification stage, or that it cannot be started from the optical drive?

Boot press F2 or Del to enter the BIOS settings, although it is English, find an option with "load default", and restart it after being sure.

...Serve,Just change the drive order,Don't say you don't know which one is For example, if you originally had a hard disk drive,You can change it to CD ROM or vice versa,If you don't understand it, you can replace the signal strip of the hard disk and the optical drive with the socket,The two on the motherboard。

Weconex H55 Pro motherboard does not have an IDE interface, because your original optical drive is an IDE interface, so it cannot be directly connected to the motherboard. You can buy an "IDE to SATA two-way adapter card" to connect your original optical drive. (**More than a dozen yuan).

You can buy a SATA adapter card for IDE and use the IDE CD-ROM drive.

Lie to you, the new motherboard also has an IDE interface.

Generally, there is an old IDE interface, or use an adapter card, and then connect the SATA port, all of which are fine.

Change the disc. Switch to a high-power PC power supply.

Change the optical drive data cable.

Try jumpers again.

Try a different drive.

Please specify the configuration if you ask a question.

If not, there may be a problem with your CD, which cannot be booted, you can change the disc to see it, in addition, you still need to confirm whether there are correct settings in the BIOS, and then the extreme, you can unplug the hard disk to see if it can boot, if it still can't start, it is recommended that you change the disk to try it.

Hehe. First of all, take off the motherboard battery, plug the positive and negative poles of the motherboard into contact and discharge once in 5 seconds, and solve the possible wrong settings of the profiteers.

1. Take down the CPU fan, buy a new one, ask for the same one, come back and plug it in, and solve the problem that the CPU may be too high.

2. Disassemble the power supply, check the circuit of the fan, and reverse the two connected wires. I don't know if I misunderstood? Hehe, if you won't pick it up, take it to the repair shop, remember to change it, and watch him pick it up for you anyway, yes, it's a matter of 5 minutes.

3. Plug the optical drive into the back port of the IDE, plug the hard disk into the middle port, and insert the white cap on the hard disk jumper (that is, the row of pins between the IDE cable and the power cable) in the right 2nd position. The strip on the optical drive is plugged into the right 1st position.

The problem you're talking about is mostly a misconfiguration or overheating problem, so let's do it first and see if it improves.

What optical drive serial port or parallel port?

Serial port: change the interface to ensure that the power supply is not aging, and don't have an optical drive that can't be moved.

Parallel port: Check the line.

Finally, at the end of the day, I threw the disc drive away.

Be humble when asking questions. I see you asking people questions, and you know that you want to impersonate NB

If you can't find the optical drive, there may be a problem with the data cable, find a way to replace the cable until it can be detected!

After you turn on the phone, see if there is an optical drive icon. If you don't see if the wire is not connected well. There is no electricity supply.

At the time of booting, on the first screen, press the DEL key (multiple presses in a row) to enter the BIOS settings.

For the award BIOS, select the second option for First Boot Device and press Pagedown or PageUp, or add and minus keys to select until.

The cdrom option appears, then press Esc, press F10 to save your changes, and restart.

For the AMI BIOS, after entering the BIOS, press the right arrow key to the fourth item, find the option of First Boot Device, adjust it until the CDROM appears, then save the changes to exit, reboot.

Put the system installation disk into the CD-ROM drive, and it appears: Press anykey to boot from cdrom. . . Press any key to enter the installation interface!

Restart the machine and click the DEL key to enter the BIOS system, find it in the system boot, HD starts with the hard disk, and CD starts with the CD from the CD.

Change the optical drive cable and change it to another version of the system.

The system is not installed, so you have to format the C disk before installing it.

Generally, there will be no such thing, the old hard disk and optical drive are IDE interfaces, and the old motherboard is also the corresponding IDE interface, and the current optical drive, hard disk, and motherboard are SATA interfaces. If you want to use it, you need to find a conversion cable and you can use it.

Yes, you can buy a SATA optical drive Now it is basically this interface, and the installation method is the same as the hard disk.

No way? Supposedly there should be.

Check whether your optical drive is serial or parallel, there are optical drive interfaces on the computer motherboard, and very old motherboards may be parallel ports;

How can there be no optical drive excuse on the motherboard.

It must be able to, the computer case should have a reserved optical drive position, even the floppy drive position, whether you use it depends on yourself.

Disassemble the side cover of the chassis,Close to the interface under the power interface,It is the parallel port interface,Find the parallel port data cable and check him here,The other end of the parallel port data cable is connected to the optical drive port,There is also a 4-pin interface on the optical drive port,The thick 4,This is the power supply interface,Find a random plug in from the power supply,Pay attention to the position of the buckle when connected,To correspond,Otherwise, it can't be connected,Forceful will cause damage to the computer。。 (If you buy a CD-ROM drive and come with an installation manual, if you have it, you can check the manual is the easiest.) ）

In fact, when you buy a CD-ROM drive, take the computer over.,It's free to install.,It's best not to operate it yourself.,In case you accidentally damage there.,It's worth the loss.。。。