CS mouse delay for advice, CS mouse delay

You're talking about turning off mouse acceleration.

The principle is that when you turn on the mouse to accelerate, the distance the mouse moves on the screen is related to how fast you move the mouse. When turned off, it's only relevant to your actual mouse movement distance.

To turn off mouse acceleration, it takes 2 steps.

One: Control Panel Mouse Remove the tick of "improve the accuracy of mouse movement". That's what you call desktop mouse sensitivity.

2. Add the following three commands to the shortcut of CS: -noforcemspd -noforcemaccel -noforcemparms

This turns off mouse acceleration completely.

There is also the need to set the mouse speed in the game's advanced options.

Mouse acceleration is a key influencing factor in CS. Highly recommend closing it.

First of all, let's explain the dual attributes, that is, the DPI adjustment that comes with the mouse and the flexibility of the mouse that the computer adjusts.

Desktop sensitivity is to substitute the sensitivity of the desktop mouse into CS, that is, to enable the properties of the desktop.

The speed of response is completely their own preferenceCS has mouse settings,Masters generally set the attributes to very low,There is a master in the world who has set it,Very accurate,Combined with the mouse's own DPI adjustment, it can better show the accuracy!!

The advanced settings in the game settings have mouse adjustments to try it.

First of all, there is no so-called delay phenomenon in the mouse, and most of the latency in CS refers to the concept of network latency, which is intuitively reflected in the PIN value. You can see if the pin value of each machine is the same, because the Internet café is connected by a large router, basically each machine is divided equally, so theoretically the pin value will not fluctuate very much.

You can join via the shortcut -noforcemaccel -noforcemparms -noforcemspeed,; to turn off the CS mouse acceleration, so that the mouse will move more smoothly in CS. Otherwise, the network management will come over to open the control panel for you, and turn off the one in the mouse to improve the accuracy of the mouse.

One: If it is a scroll mouse, there may be too much dust inside, and the photoelectric mouse may have water or something.

Second: there may be network latency, and the ping value is a bit small.

I don't feel strong, it's fluttering, one is that there is a problem with the mouse itself, (such as being often smashed; It's a bargain; The second is a system problem, the system has a virus or the network is unstable.

Only one machine has an FPS of 99, and the others are all 60The graphics card VSync is not turned off. Try it if you don't believe it.

Still is? Did the display settings change to opengl?

The mouse and keyboard settings in the control panel have changed, right? A quick search of the mouse and keyboard settings in the control panel should make some changes.

No matter how good the graphics card is, if the settings in the graphics card settings are not adjusted to the minimum, there will still be a delay, like you said, turn off all the things in the graphics card options, vertical synchronization, high performance, all low, you try again.

I've also encountered this problem, and I can't remember it for years, but I just seem to have turned down the picture quality and resolution, and it has nothing to do with the configuration, and it seems to be caused by a conflict with that software

I removed the unnecessary application and set it up in the display pixel in the settings! There are three options, different machines have different effects, please choose one of them to see, if not, choose the next one!

In CS, the mouse sensitivity is increased.

Hehe,It's your graphics card driver problem.,Reinstall the latest version of the driver.,In addition, just lower the resolution in CS.。

This is called needle loss, the aging of the mouse, and the most important thing is that the mouse pad is too dirty.

If you really love CS, buy your own equipment, buy a mouse, and buy a mouse pad.

Now the general special mouse is about 300 pieces, and the mouse pad is 100-200

Mouse lag?? I haven't encountered it yet. Are you saying that the movement speed has slowed down? You open the Control Panel -- Mouse Pointer -- Pointer Options and you can adjust it here. Look. Hope it helps.

VSync is not off, VSync is off.

In the Control Panel Display Settings Advanced OpenGL settings, set VSync to Always Off.

Go to the next registry file on the Internet, remove the mouse to speed up, and try

I believe it's okay to change the 3D mode in the graphics card to 2D mode.

Are you using a wireless mouse, if not, it's too stuck.

If so, it is also possible to make the mouse and keyboard lack of power, and the wireless mouse and keyboard itself is not very suitable for gaming.

Play online or on your own? Playing cards online is a problem with the network, and if you play by yourself, it is a problem with the computer or game.

There are several ways to fix it:1VSync is not turned off in the performance of your graphics card, you can turn VSync off, which happens all the time.

2.You cancel the tick in the mouse increase sensitivity option in your control panel.

3.Gives you a parameter.

noforcemparms -noforcemaccel -noforcemspeed

Put it behind the CS game directory. This is the parameter for going out to the mouse acceleration. Use the method backhand keys to the CS game, select the attributes.

Add Example: e: Chinese version in the Target column" -game cstrike -noforcemparms -noforcemaccel -noforcemspeed

You can turn up the sensitivity of your mouse in the game settings.

Console ex interp

This has nothing to do with the mouse.

Change to a Microsoft mouse.

The fight is smooth.

Probably your mouse is off detection.

If you play CS, it is recommended that the landlord buy a mouse Microsoft can be.

Not a mouse reason.

Check the 3D settings of your graphics card for vertical sync first, and if it's on, select Always Off

It's the reason for fps, press'‘'Call out the console and type CL showfps 1

To see what the current fps is, for example it now shows 50, press'‘'Call out the console, enter fps max 49, and there should be no delay cause.

Adjust the mouse speed in the personal settings.

Open the console.

Input: ex interp

If it's still floating. Let's do it.

I guess it's not your mouse's problem, it's the problem of high ping when you enter the server, which causes your mouse speed to be delayed!

Because you didn't use the mouse to accelerate!

1.Desktop Properties: Settings Advanced Select the option for your graphics card (mine is GeForce 7300GT) You can find the Performance Quality Settings option (may have a different name) and select V-Sync to turn off.

2.Right-click the CS icon and add a space after Properties -noforcemparms -noforcemaccel -noforcemspeed

That's pretty much it.

Switching to 3D mode will do the trick

Don't worry about anything, just control the layout Mouse Turn off mouse acceleration Turn off latency!

Hope you help!

I think it's okay to just adjust the mouse sensitivity.

Reinstall your graphics drivers. That's how I solved the problem. It doesn't take much time.

As for graphics cards, the 9500GT is just a 64-bit graphics card.

1.Network card.

2.Graphics card driver issues.

card, the computer configuration is not enough, or the memory usage is too high. There may be software conflicts or software that is opened too much.