What is the principle of heater for heater over water heat ?

A heating heat exchanger uses the heat of the heating to convert tap water into hot water. When a bucket of hot water is used up, the heat exchanger will automatically replenish the cold water; After more than 10 minutes, the hot water can be released, because the hot water is relatively light, the hot water converted in a short time will be concentrated on the top of the cylinder.

The amount of hot water is determined according to the heating temperature of the user and the length of time after the user is deactivated; The higher the heating temperature, the longer the downtime and the higher the temperature of the hot water stored in the drum.

There are heating inlet and outlet and tap water inlet and outlet installation ports at both ends of the heat exchanger cylinder. The cylinder can be filled with tap water, and the heating hot water passes through the coil in the cylinder to heat the tap water in the cylinder; There are two water separators inside the inlet and outlet, which can make the tap water slowly inject into the heat exchanger cylinder, so that the cold and hot water are evenly separated, and at the same time, the hot water is pushed out of the cylinder to achieve the normal use effect.

This kind of thing is called a heat exchanger. The principle is that there are a lot of copper pipes in it, and the heating water will cover the water in the copper tank. It's as simple as that.

1) Structure of super-hydrothermal water:

Overheating is a small heating bag that is smaller than the heating in the house, and it is heated by the circulation of hot water and return water from the heating. The difference is that it has a copper tube in its stomach and makes n turns in its belly. The function of heating is to dissipate heat; The function of over-water heating is to heat the copper ring in the belly and the water in the copper ring, and the two ends of the copper pipe are left outside, one end is connected to the tap water, and the other end is connected to the faucet.

It doesn't cool down like heating, and it can keep warm for a while when it stops.

Advantages: Easy to use in winter, safe without electricity.

Disadvantages: the water output is small (especially in the lower floors of the building), the water will not be hot when the flow is large, it is easy to leak, and the life is short.

2) Installation: 1) First connect the two pipes below the diagram with the hot water pipe and return pipe of the heating pipe.

2) Connect 1 to the water pipe (through the valve).

3) 2 mouths can be connected to two faucets, one is placed in the washbasin, and the other is placed in the vegetable sink, which is connected with the thinnest aluminum-plastic pipe for heat preservation. When the heating is provided, we can use hot water to wash vegetables, dishes, hands, and face.

4) When not using water, as long as there is heating, it will keep warm at dozens of degrees, which is easy to produce bacteria, so it is not recommended to cook and drink after boiling.

The heat exchanger has 4 interfaces, taking the plate heat exchanger as an example: generally the left side is the hot side, the right side is the cold side: the upper left: the heat inlet (heat source water supply), the bottom left: the heat out (heat source return water).

Bottom right: cold in (heating return water), Top right: cold out (heating water supply) Connect the pipes in this way.

It is a low-carbon, environmentally friendly and energy-saving device that uses the circulating heat of heating to heat tap water, with a built-in high-efficiency heat exchange tube, and the hot water generated can be used for the whole family to bathe, wash, wash, wash vegetables, wash dishes, and so on.

It is the most ideal product for heating and providing normal hot water in modern homes and units in winter. The solar energy and heating water heater are organically combined and installed, and the hot water can be used all year round without electricity or gas, safe and hygienic, and all year round.

Circulating heating water heater (such as: plate heating water heater, water heat, etc.) is a copper pipe in the cylinder, with a high conversion rate, tap water in the pipe, heating water outside the pipe, and the tap water flowing in the pipe is heated in a short time with the hot water of the heating. Since China is a low-temperature heating, there is not enough heat source, and no matter how high the conversion rate is, it is impossible to convert tap water into the hot water we need in a short time.

This structure must require the heating temperature to be 70 to 80, and the pressure difference to achieve the use effect. Therefore, it is necessary to use the Shifeng storage heating water heater, and the storage heating water heater can meet the problem of hot water bathing at low temperatures.

The heat exchanger generally has four interfaces, two of which are the inlet and outlet of the heat source. The other two interfaces are the use of hot water inlet and outlet, the installation of cold water (tap water) into the heat exchanger cold water inlet, and then use the pipeline to lead out the hot water, connected to the hot water faucet, generally cold water access before the connection to a one-way valve, and then a ball valve, the ball valve is generally normally open, when using hot water to open the hot water faucet.

The outlet temperature of hot water boilers is generally 110-150 degrees, while the temperature of heating water supply is generally 45-60 degrees. It is not suitable to use the boiler directly to supply water, and adding a water-water heat exchanger between them can solve the problem. That is to say, the boiler hot water is passed on the high temperature side of the heat exchanger, and the heating water is passed on the low temperature side, so that the boiler and the radiator are isolated through the heat exchanger without affecting the heating supply.

The heat exchanger method is a top-water type water outlet, and only the cold water will come out.

What is the function of the new type of heating dissipation water heater Hello dear, <>

The functions of the new external storage heating water heater are as follows: the new type of water storage type heat exchanger has the functions of heat storage, heat exchange and heat dissipation. Thickened pure copper pipes have a longer life than copper and aluminum radiators.

The large water capacity is 2-3 times that of the internal water storage product. The new cut surface copper Qi Xian pigging, box arc thickened weld, to prevent water leakage. 360° no dead angle spraying, no paint stripping, no fading, more beautiful.

There are heating inlet, outlet and tap water inlet and outlet at both ends of the stainless steel water storage heat exchanger cylinder, and the tap water is heated by the coil in the cylinder before the tap water is high. There are two water separators at both ends of the interior, which can make the tap water slowly inject into the heat exchanger cylinder, separate the hot and cold water evenly, and at the same time push the hot water out of the cylinder to achieve the use effect. The heat exchanger is made of food-grade stainless steel materials inside and outside, and it is tested by water pressure before leaving the factory, which is corrosion-resistant, safe and reliable. There are various types and varieties of heat exchangers.

There are immediate, horizontal, and ring types; There are also barrel type, box type, combined type, etc., which can also be customized according to customer special requirements. Hope it helps!

Summary. Hello, dear. There is no harm in connecting the water to the heating heat exchanger and then boiling it.

Hello, dear. There is no harm in connecting the water to the heating heat exchanger and then boiling it.

Hello, dear. The water in the heat exchanger added to the heating is not a loop with the water in the original heating, and if the water inside is kept clean, it can be drunk. However, because the water in the heat exchanger is raw water, it is easy to get sick if it is simply heated for drinking, so it is better to drink it after boiling.

1. Reduce the thermal resistance of steel radiators All steel radiators have a certain thermal resistance, the higher the thermal resistance, the lower the heat dissipation. Minimizing the thermal resistance of steel radiators can increase the heat dissipation rate of steel radiators, thereby increasing the amount of heat dissipated. 2. Increase the indoor air flow of the steel radiator is mainly radiant heat dissipation and convection heat dissipation, if the air circulation is not smooth, the heat dissipation or reeds will be relatively slow, the air in the house heats up slowly, the room is not hot, can be solved by improving the air circulation in the house.

The effective combination of heating and water heater can be used for both heating and hot water without the need for a special heating system. Also called a heating water heater.

Pressure storage heat exchangers use the heat of heating to convert tap water into hot water.

During heating, the water stored in the heat exchanger is at the same temperature as the heating water. The larger the volume of the heat exchanger, the more hot water can be stored.

When you run out of a bucket of hot water, no need to manage, the heat exchanger automatically replenishes the cool water; After more than ten minutes, the hot water can be released, because the specific gravity of the hot water is light, the hot water converted in a short time is concentrated above the cylinder; However, the amount of hot water is determined according to the heating temperature of the user and the length of time after the user is deactivated; The higher the heating temperature, the longer the downtime, and the higher the temperature of the hot water stored in the drum until the heating temperature is reached, ensuring that the hot water you need is safe and time-saving.

Heating heat exchanger is a simple water heater that does not use gas, electricity, or solar energy, and is an energy-saving device that uses heating heat to heat tap water, with built-in high-efficiency heat exchanger pipes, and the hot water generated can be used for bathing, washing, dishwashing, and washing vegetables for the whole family.

Plumbing system: The water is heated in the boiler, the hot water is supplied to the room through the water pipe, enters the heating radiator, the heat is exchanged with the air in the room, the temperature of the room is raised, and the water after the heat exchange is recycled back and reheated.

This water cannot be used for daily use such as washing face and laundry, because it is an independent system, and its normal operation and efficiency will be affected when used.

I found a heater on the Internet to return water on one side**, and briefly talked about how the radiator works.

1. Hot water circulates by gravity in the radiator. When the hot water enters the radiator in the upper pipe, the water with high temperature is lighter, and the new water floats on the top, squeezing the water that has been heavily increased after cooling downward. The water, which becomes heavily larger after cooling, is discharged from the return pipe below.

Small heating systems, without external force, can form a cycle by this gravity, and this principle is now commonly installed with earth heating.

2. The pressure difference of the water supply and return pipes of the central heating system is the superposition of the pressure difference generated by the circulating water pump and the pressure difference of the upper gravity circulation. Therefore, the flow rate of circulating water is very large.

1. First of all, there are two sets of water supply systems; One is the central heating pipe circulating water supply system, and the other is the tap water supply system.

2. Secondly, the capillary of the tap water supply system is wrapped by the central heating system to form a heat exchange device, and the tap water capillary is heated and wrapped by the hot water of the heating system, and the tap water capillary absorbs the heat of the hot water of the central heating system and heats up into warm water.

3. The tap water heated by this set of heat exchange device becomes warm water after flowing out.