How to further do a good job in energy conservation and consumption reduction of enterprises?

1. Update and eliminate inefficient motors and high-power-consuming equipment: promote high-efficiency and energy-saving motors, rare earth permanent magnet motors, high-efficiency fans, pumps, compressors, high-efficiency transmission systems, etc. Upgrading and phasing out inefficient motors and high-power-consuming equipment; Adopt high-efficiency and energy-saving motors and system-related power-saving equipment and newly install motor systems.

Gradually restrict and prohibit the production, sale and use of backward and inefficient products. For the renovation of old equipment, the focus is on the modernization and transformation of small and medium-sized motors, fans and pump systems with high power consumption and the reasonable matching of constant flow systems.

2. Improve the efficiency of the motor system: promote advanced motor speed regulation technologies such as frequency conversion speed regulation and permanent magnet speed regulation, improve the adjustment mode of fan and pump motor systems, and gradually eliminate mechanical throttling adjustment methods such as rams and valves. Focus on the speed regulation transformation of large and medium-sized variable working condition motor systems, reasonably match the motor system, and eliminate the phenomenon of "big horse-drawn trolley".

3. Dragged device control and equipment transformation: the traditional mechanical transmission mode is transformed by advanced power electronics technology transmission mode, and AC speed regulation is gradually used to replace DC speed regulation. The use of high-tech transformation of the drag device, focusing on large-scale water conservancy and irrigation equipment, the total motor capacity of more than 100,000 kilowatts of large enterprises demonstration transformation, etc.

4. Optimize the operation and control of the motor system: promote soft start device, reactive power compensation device, computer automatic control system, etc., and reasonably allocate energy through process control to achieve economic operation of the system.

A pharmaceutical consumables **** is a relatively modern pharmaceutical packaging material manufacturer in China, with a full set of advanced production lines, with an annual output of up to 600 million, but the benefits are not satisfactory.

Due to the lack of scientific energy management and control methods, the company's monthly power consumption exceeds 200,000 kWh, and the annual electricity bill exceeds 3 million yuan. High energy costs are a serious dilution of corporate profits. Therefore, the construction of a scientific and rigorous energy management and control system has become an important means of energy conservation and efficiency improvement of the enterprise.

After research and analysis, the company finally reached a cooperation with Rongshang World.

Different from the complex transformation methods and long transformation period of other enterprises, Rongshang Tianxia has created a simple operation method and the implementation method of moving in, and completed the design, research and development, deployment and implementation of the entire project in 7 days.

Deploy the Industrial Brain.

Deploy an industrial data gateway.

Meter upgrades and connections.

Three steps at the same time.

The energy consumption control system uses the industrial brain to complete the interconnection of industrial software and hardware, and collects, transmits, calculates, analyzes, processes, summarizes and stores data for production equipment in a timely manner. Through the dashboard (large screen, terminal, computer, mobile phone, etc.) through the background big database, the user can comprehensively monitor the operation status of the equipment and the distribution and consumption of energy (water, electricity, gas, etc.), and decompose the energy saving plan of the enterprise to each workshop, so as to help the enterprise realize the efficient management of real-time early warning of equipment failure, optimization of energy consumption status, industrial on-site production and safety control, etc., and finally achieve the effect of energy saving and consumption reduction.

After the implementation of the project, the company has achieved 100% ** control of energy consumption in the whole production line, providing data support and basis for energy conservation and emission reduction; Reduce communication costs by more than 90%; Energy saving and consumption reduction of 20%; Save 2 million yuan in production costs. The company can also make reasonable production scheduling according to the order plan, taking into account the tiered electricity price, and provide strong support for the company's lean production. In addition, the project was selected as a "Typical Case of Qingdao Smart City" in 2019 and won the "Shandong Internet of Things Science and Technology Progress Award" in 2020.

1. The company vigorously carries out energy-saving and consumption-reducing activities, and needs to vigorously strengthen publicity and education to create a good atmosphere of "everyone stresses conservation, everything stresses conservation, and always stresses conservation". Call on all employees to strictly economize, carry out the "S four ones" (save one kilowatt-hour of electricity, one drop of water, one liter of oil, a piece of paper), put forward reasonable suggestions, link with the economy, implement the reward and punishment system, and improve the energy saving and consumption reduction work.

2. Strictly control office electricity, during the day in the case of good light conditions, the lights must be turned off, do not use the computer to turn off the power in time, after work, the person in charge of the department should carefully check whether the computer, water dispenser, lighting and other electrical equipment is off power.

3. Strengthen office management, all offices are strictly forbidden to privately connect the power supply and use electrical appliances, and if there are special circumstances that require electrical appliances, they need to report to the company's leaders for approval.

Fourth, the production workshop according to the production task and peak, valley, flat electricity time to arrange the production time reasonably, effectively reduce the production cost.

5. Security guards need to inspect and inspect the production workshop and road lighting every week. Faults and hidden dangers should be discovered in a timely manner, and relevant records should be submitted to the corresponding person in charge.

6. All departments, offices and production workshops should designate special personnel to be responsible for energy conservation and consumption reduction, and strictly manage them, so as to truly form a good atmosphere for energy conservation and consumption reduction in the factory area.

The importance of enterprise energy-saving work, the entry point of enterprise energy-saving and consumption-reducing work is to make a fuss about meticulousness and perseverance, in order to more effectively improve the energy-saving effect of enterprises;

Maximize the creativity and enthusiasm of employees in energy-saving work, so that the company's energy-saving and consumption-reducing work jumps to a new level. The article discusses the energy-saving work of enterprises.

1. The water used to wash rice can be used to water flowers and trees, or to flush toilets.

2. Garbage classification and disposal, which can be collected together, or homemade small handicrafts or sold to waste collectors.

3. Use beverage bottles to make flower pots, which can be used to grow plants. Small kettles can also be made from plastic bottles, and the size of the hole can be chiseled according to the size of the plant.

4 Old newspapers and books are gathered and sold in a certain amount. Paper companies can be reused, such as books, chopsticks, etc.

5. Use less disposable products. The manufacture of disposable products consumes a lot of raw materials and causes great harm to the environment. Such as: disposable chopsticks, disposable plastic cups, etc.

6. Bring cloth bags for shopping on the street, not plastic bags. Or don't throw away the plastic bag after use, wash it and reuse it.

7. Turn off lights, electric fans, TVs and other electrical appliances (power will also be consumed in standby mode) and faucets to save electricity and water.

8. In summer, the temperature of the air conditioner is limited to about 26 degrees (the air conditioner is too electricity-intensive), and the door should be closed when the air conditioner is turned on to reduce the loss of cold air.

9. Carry a handkerchief and reduce the use of paper towels, which not only saves and protects China's forest resources, but also effectively prevents resources and economic losses caused by natural disasters such as soil erosion and debris flows.

10. Wash clothes by hand as much as possible, instead of machine washing, which can reduce the amount of water used.

11. When washing clothes, the amount of laundry detergent is appropriate, or washed with soap, which can reduce the number of rinsing times and reduce water consumption.

12. Electrical appliances should be bought with energy-saving electrical appliances, and energy-saving lamps should be used for electric lights, although the effect is not obvious in the short term, but a lot of electricity can be saved under the long-term accumulation of the public.

13. Try to buy solar water heaters for water heaters, which not only reduces the use of gas and saves resources, but also makes reasonable use of solar energy and improves resource utilization.

14. Use bicycles instead of motorcycles, cars and other energy-dissipating vehicles, which not only saves energy, but also reduces greenhouse gas emissions.

15 In rural areas, the straw produced after the harvest of crops can be stacked to make feed for livestock, which not only makes efficient use of resources, but also reduces greenhouse gas emissions from combustion.

Shenzhen Tongyuan tells you how to save energy and reduce consumption.

1. Strengthen energy-saving publicity and demonstration efforts to create an atmosphere.

2. Cultivate awareness and optimize design.

3. Apply energy-saving technology, formulate energy-saving and emission reduction measures, and dynamically monitor energy consumption.