I pulled the net from another home how to get wifi 50

Desktop or laptop?

What system? It can be shared by wifi, and the system has bearer network support. As long as you have a wireless network card, enter netsh wlan show driver in the cmd command prompt to see if your wireless network card supports bearer networks.

If possible, enter netsh wlan set hostednetwork mode=allow ssid=custom wireless network name key=password.

When you're done, you'll find a wireless network adapter in the network adapter, and then you can share your wired network to it.

If you connect directly to the computer. Your computer has a wireless network card that can be used with 360wifi and transmits into a wireless network. So that the phone can also be used. For example, a laptop will do.

No, there must be a transmitter device, you don't have a transmitter device, how can the wireless terminal that wants to connect to the network get the signal, or you can connect to your laptop with a wire, and then set your laptop to wireless sharing, and other devices can connect to the wireless of this notebook.

You can buy a 360 portable wifi plug into the computer, and it is not expensive 25 a, and you can buy mobile phone accessories wherever you can.

Summary. Dear, when moving, wifi can also be taken away, in fact, it is ours that is taken away.

Dear, when moving, wifi can also be taken away, in fact, it is ours that is taken away.

You can see which network you are using, and then go to the relevant business office to go through the procedures.

What needs to be prepared is the ID card of the head of the household, and a copy needs to be prepared to fill out the migration form. Wait for the review, and the blind personnel of the working group will go through the procedures for relocation.

When handling it, you should pay attention to whether you choose the same business, such as light to ADSL. If your original home is ADSL, but your new home is light-accessed, you will have to go through the transformation procedures. In addition, you need to pay a certain fee, which is about 20 yuan to 50 yuan.

After submitting the filled information, Dahong Land will be able to handle the migration procedures within 7 working days. Of course, during this period, we can also call the contact of the service provider of Dianju Zhenxin ** and urge them to improve the efficiency of Wu Qinggao's work.

However, it should also be noted that although you can go to the business hall through the owner's ID card to handle the morning affairs of the move, it should be noted that it can only be in the same place, that is to say, in the city, you can not move to outside the city. If the family moves away from the city, the wifi can't be taken away.

Absolutely, there are two ways to do it:

1.Change the connection mode of the second-level router, connect the network cable connected to the LAN port of the first-level router and also connect to the LAN interface of the second-level router, at this time the second-level router is used as a switch, there is no need to set the WAN interface parameters, directly connect the network cable to the computer, just log in to set the wireless part of the parameters can be used, the wireless terminal searches for the wireless signal of the wireless router and enters the encryption key, and can be connected and used after verification;

2.Another way is to use the WAN interface of the second-level router, at this time the router is working in the routing mode, connect the computer with a network cable to log in to the second-level router, set the second-level router WAN interface to dynamic IP mode or static IP mode (the static IP address needs to be set according to the login IP address of the first-level router), and then set the parameters of the wireless part. However, it should be noted that the IP address assigned by the LAN of the second-level router must not be in the same network segment as the first-level router, otherwise there will definitely be conflicts;

3.In general, in the case of cascading multi-level routers, the first-level router needs to be set to the route mode, that is, after logging in, enter the WAN interface settings-PPPoe mode, and enter your broadband account and password.

Pull the network cable if you go to the Internet to dial it, in fact, whether to dial is the same, plug the pulled network cable into the WAN port of the wireless router, and then lan1 pull a network cable to your computer, and then the computer login account password is admin initially, if you want to dial the number, choose the dialing mode, do not dial the number on the choice of automatic settings, and then guide you to set the wifi name and password, so it's OK, if you want the computer to also wifi Internet, you must have a wireless network card.

Absolutely, there are two ways to do it:

1.Change the connection mode of the second-level router, connect the network cable connected to the LAN port of the first-level router and also connect to the LAN interface of the second-level router, at this time the second-level router is used as a switch, there is no need to set the WAN interface parameters, directly connect the network cable to the computer, just log in to set the wireless part of the parameters can be used, the wireless terminal searches for the wireless signal of the wireless router and enters the encryption key, and can be connected and used after verification;

2.Another way is to use the WAN interface of the second-level router, at this time the router is working in the routing mode, connect the computer with a network cable to log in to the second-level router, set the second-level router WAN interface to dynamic IP mode or static IP mode (the static IP address needs to be set according to the login IP address of the first-level router), and then set the parameters of the wireless part. However, it should be noted that the IP address assigned by the LAN of the second-level router must not be in the same network segment as the first-level router, otherwise there will definitely be conflicts;

If you don't want to buy a device, you can also use software to share wifi if the computer has a wireless network card, and the method is as follows:

2. Find "Free WiFi" and click to open the tool.

First of all: it's not a wireless cat! It's a wireless router.

As long as one wireless router is OK, the others are not.

Some settings need to be made, which are different from the standard settings, and the wiring is not a general connection. Definitely success.