The CPU of the little brother is Saiyang M1 2G, can it be overclocked, can you recommend a few overc

Yes, BIOS is fine, but remember to lock the frequency, otherwise you will be tired of the graphics card and sound card.

Be careful yourself, and pay attention to heat dissipation.

Whoever said it was unstable, I was overclocked by the software, no problem!

The steps are as follows: you first need to understand the model of the CPU and motherboard chipset.

After that, the right medicine is prescribed.

You may need a PLL IC, you can disassemble the chassis and look at it, it is ICS...

Yes. Overclocking without software.

Set up in the BIOS.

It depends on what master you use

Gigabyte's easytun (or easyrun forgot) overclocking tool The rest is not clear

You can set it in CMOS, and the software is super unstable.

You'll need to give your hardware information!

Generally, it's super in BIOS!

It's best not to overshoot.

There are damages for both your CPU and the motherboard.

In the past, the motherboard manual was available, but now there is none, just because the current board itself has a super screen, and you don't need to do it.

Brother, listen to me, if there is no superman next to you to watch you overclock, you'd better not overclock, even ask this kind of question, you overclock, that's the reason for the explosion

CPU overclocking software.

There are a lot of problems with configuring the computer.

Even by hand.

I don't know.. Come and see.

You don't need software, it's very simple in BIOS.

1.First of all, you have to confirm your motherboard chipset and model, and then you will get there.

Look for the Clockgen version that matches your Hail motherboard model, if your motherboard model is not one of them, please figure out your chipset model and choose a motherboard with the same model as your motherboard chipset, if you have a miscellaneous 865PE motherboard, you can choose an 865PE motherboard like ASUS MSI.

2.After selecting the model, run clockgen, first click the get values button, the software will automatically detect the CPU memory AGP PCI frequency, drag the slide rod, you can see the increase of the CPU memory AGP PCI frequency, after confirmation, click the set values button to save the difference, take effect immediately.

Do it yourself in the advanced chipset set of the BIOS to make the CPU work at a high frequency!

We generally overclock in the BIOS.

Generally, press the keyboard del to enter the BIOS when booting up

Different motherboards have different BIOS entry methods, you can adjust the frequency by looking at the manual to find the CPU option.

For example, adjust the main frequency from 200 liters to 220 and then save, don't exceed it too much at a time, take your time.

A lot of software **.

It is recommended to use a motherboard with overclocking function, such as Gigabyte and so on.

Everyone brings an overclocking tool to facilitate overclocking.

CPU ultra almost does not use software, you need to boot the computer and press delete to enter the super. The graphics card is supercharged with software.

CPU overclocking software.

Desktops can be overclocked in the motherboard's BIOS.

I've tried all the overclocking software on my laptop, but I can't use it.