Wireless routers must be connected to the host computer first, and the second computer can receive t

The normal setup does not need to be turned on, as long as the router is powered on, all computers can access the Internet through it.

First of all, you check your connection. I don't know what kind of Internet access method you use here, what brand of wireless router you use, here I will take TP-Link as an example to briefly introduce:

1.After connecting the TP-Link wireless router via wired mode, enter the management address in IE, such as the default username and password: admin, and enter the setting interface after confirmation.

2.Generally, ASDL dial-up Internet users select the first PPPoE to set up the next step. If you are on a LAN or through another special network connection, you can select "Ethernet Broadband" to set it up next.

Here is a description of the ADSL dial-up Internet settings, and the following two will be explained later. In the account and password input interface of ADSL dial-up Internet access, enter the Internet account and password provided by the user in the network service provider according to the literal prompts, and then click the next step directly. 3.

Next, you can see that there are four parameters: wireless status, SSID, frequency band, and mode. Users who can't detect a wireless signal should check whether their router's wireless status is turned on.

SSID can be modified and added according to their own preferences, and this item is just the identification name of the connected device that can be easily needed after searching for the connected device when wireless connection.

Good luck!

The landlord's host is not going to dial up the Internet without setting up a route automatic dialing bar You can set it to route automatic dialing on the line It has nothing to do with whether the host can be opened or not.

You can set up the router and then add a hub, that's it, that's how I set it up, split a main line on the router to the hub, and then split the network cable on the hub and then to the computer, try to know.

Of course, you need a host as an information source to receive signals!

Summary. Hello as follows:

1. The router must be connected to two wires from the LAN port to the network port of the two computers.

2. Also, two computers can be set to automatically obtain IP.

3. Or set different static IPs, such as computer A for computer and computer B for 4, so that there will be no conflict.

The router is connected to two computers, and one of them can't get on the network, which one can plug in the network cable first.

Please wait patiently for a few minutes, we are sorting it out, and we will answer you immediately, and please do not end the consultation.

I hope mine can help you, if you are satisfied with my service, please give a thumbs up, I wish you all the best!

As follows: 1. The router must be connected to two wires from the LAN port to the network port of the two computers. 2. Also, two computers can be set to automatically obtain IP. 3. Or set different static IPs, such as computer A and computer B so that there will be no conflict.

Hello as follows: 1. The router must be connected to two wires from the LAN port to the network port of the two computers. 2. Also, two computers can be set to automatically obtain IP. 3. Or set different static IPs, such as computer A and computer B so that there will be no conflict.

Ask about custom messages].

1.Does the laptop have to be connected to a router with a network cable? Why? In short, thank you.

No network cable at all.

New wireless router (same goes for factory reset). I don't need an Internet cable, I use a wireless Internet card (notebook). Just be clear and sure of the network name of your wireless route (don't go into someone else's network.

You can't get into the password), and the new route will generally be displayed. A network without security mechanisms is your network. Connect on it, no password.

Again.. Go inside, you can do whatever you want.

If you use a line, you will generally not enter the wrong route...

2.Because it's installed for a friend.,I didn't dare to move it again when it was easy to use.,It's already good for me to unplug the network cable between the laptop and the router? Does it affect use?

Can be unplugged. You've set up the wireless router, and it has nothing to do with the computer. Wireless routing is automatically dialed. Automatic work, does not affect...

Whether the wireless network for wireless routing is turned on. You can take a look at the indicator light of the wireless signal. Shem's words are on. Generally open ...

When you set it up, you didn't turn on the wireless at the beginning, and when you don't have a wireless connection, you must have a wired connection. After there is a wireless connection, you can directly unplug the network cable to connect to the wireless, and you can also log in to the router. That is to say, if the wireless has been turned on by default, there is no need to use wired, and the connection to the login route setting is the same, but make sure that the wireless is on.

It is necessary to set up the wireless routing in advance, generally must be wired to connect the computer or notebook and enter through its browser, after the wireless routing related wireless network and its account password are set, there will be nothing to do with this computer or notebook in the future, where the wireless routing range with a wireless network card of the desktop, notebook and mobile phone, etc., can be connected to the wireless account and password wifi Internet access

1. It is not necessary to have a network cable to connect to the router, the general wireless router will have an unencrypted wireless network after the default factory settings are powered on, and the computer, tablet or mobile phone can connect to the network and set up the router through the browser, only some mini or special models of routers do not open DHCP by default and must manually specify the IP address.

2. After the normal router is set up, it is okay to have a wired or wireless connection, and it should not affect the use.

The first step must be connected to the wireless router with a network cable, the reason is that you need to establish the attribute setting in the local connection, win7 and xp attribute setting options are different, and they are all in the manual. After the second step is established, you can remove the network cable to establish the connection, and the wireless Internet access is set up.

It's okay, even if you unplug it after setting, you can use it, directly connect the wireless router to the adsl cat or the community broadband entry line, set up the account password in the wireless router, because the setting requires a computer, so the router you just got needs a computer to set up, and after setting up the account and password, you can work independently according to the settings, and you can also use the wireless network card directly without a network cable.

It's just that the first time you set it up, you need a network cable to connect to the router, and there is no problem with unplugging it after setting it up.

By default, the wifi of the wireless router is turned off, and you need to log in through the network cable and make some settings, such as the name and encryption method, before you can use the wireless.

When the wireless router is set, only the computer and the router are connected with the network cable, can be set and modified, do not connect is not able to enter the router settings, to prevent outsiders from maliciously modifying, after the wireless router is set up, connect to broadband, and it will work normally after turning on, and the LAN port does not matter whether the computer is connected or not,

Answer: Question 1: As long as the IP address of the notebook is set to the same network segment of the LAN port IP address of the router, you do not need to use a network cable to connect to the router, but some routers that do not have the wireless function turned on by default need to use a network cable connection.

Question 2: As long as the IP of the notebook is set to be in the same network segment as the LAN port IP of the router (if the router has the DHCP function turned on, you need to set the IP of the notebook to be automatically obtained), it can be connected normally regardless of whether it is a network cable or wireless.

The wireless router must be connected to the home cable and properly configured to work.

Connect your computer cable to your wireless router first, don't connect the network cable from your landlord's router first. Go to your wireless router, change the IP of the LAN to assume that the address of the landlord router is this, you can see it on the reverse side of it), turn off DHCP, and set the wireless connection and password.

Then plug the network cable from the landlord's router and your computer into the LAN port of the wireless router.

Note that it's a lan port, not the blue wan port.

As long as the network cable and routing are okay, then the cup, your network cable is separated from the landlord's network cable, and the switch should be set up at the interface of the two lines, and there can only be one route on the wifi, depending on your posture is to go online with the landlord at the same time, then I advise you to forget it, first look at the wireless protocol and then come. There is another possibility, depending on your typing skills, computer technology is definitely not good, first of all, you must have a client on your computer, that is, build a network connection by yourself, and, next time, type the problem so that the earthlings can understand it.

Buy a switch and connect it, and you're good to go. You can also use the router as a switch, the method: turn off the router DHCP, and then plug the landlord's ** line into any of the 1234, and then plug the computer's cable from the remaining 1234 port.

Remember, don't plug in anything at the WAN port.

It depends on how your landlord has set it up, and now there are a lot of them, and the network card address is set. Only this network card can be used.

1. Check whether the single machine can access the Internet normally to ensure that the network operation is not faulty.

2. Connection steps: network cable (** line) adsl (moder) router for each computer.

3. Check whether the ADL (Moder) and router indicators are normal.

4. Set up the router on any computer.

5. In the "IP address (I)" column in the attributes of the enternet protocol of the computer, set the computer to the IP of the same subnet as the router (if you don't know the IP, you can press the right mouse button in the local connection icon in the "View Network Connection" of the "Network Neighbors", and click the enternet protocol of the "Properties" to automatically obtain the IP address), and then enter the management IP of the router in the IE address bar. Enter admin in the username that appears, enter admin in the password or do not enter, the specific one varies according to the model of the router. After entering the management interface, select PPPoE in the network connection mode of the WAN, and enter the broadband account and password given to you by the broadband access provider.

2. IP setting of the "local connection" attribute on the first computer: Second computer IP settings: , and so on. In short, the mantissa setting cannot be the same for each computer.

3. Submask of each computer: Gateway: Server settings: the network IP of the local network providerStandby Server Setup:can not be set).

3. After saving the configuration and restarting the router, the computer can be connected to the Internet as soon as it is turned on.

One anchor, one road tour! A short network cable with both ends of the network cable head! It doesn't take too long, 20 minutes is enough!

Plug in the anchor and the road tour! Plug the ** line into the anchor! Use that short network cable to connect the anchor and follow the road tour!

Remember that the network cable on the other end of the road tour should be plugged into the network cable port with letters on the road tour! Then the network cables of the two computers are plugged into the 12345 of the road tour and it is OK!

In the Internet login to the road game box given on the box, set your username and password, save it and make a big announcement!

As long as you don't turn off the router, it's fine, you don't have to set it up.

Follow the steps in the manual to connect and set up, it's very simple. Try it yourself according to the instructions, you will find it so simple, very fulfilling...

There are several possibilities:

1. It is related to the strength of the received signal of the laptop itself.

2. The distance between the laptop and the wireless router is related.

3. The obstacle between the laptop and the wireless router is isolated.

4. The laptop location is related to the wavelength of the wireless router.

You try the above situations carefully, and then try the strength of the laptop's reception signal.

The signal is not necessarily correct, and the network speed is the same, so don't pay attention to him. If the network speed with a poor signal is good or bad, it is a hardware problem, turn it on and remove the dust.

1. Enable the DHCP function in the router.

2. If the computer wants to set the IP, both must be set, one cannot be set and the other is not set, and the IP segment must be set between 10-199. Similarly, computers can all be set up to automatically acquire IPs.

3. Select the default NetBIOS state on the computer (in general, the computer silently enables this option).

4. Set the DNS server address provided by your broadband service provider in the router.

5. If you need to dial up when you access the Internet for broadband, then you should enable automatic dial-up Internet access in the router.

6. Set dynamic IP or static IP in the router. (Broadband that requires dial-up, all are dynamic IPs).

Of course, make sure that your hardware is free of problems, such as network cables, crystal heads, etc.

Check whether the IP address of the second station is filled.

Whether both computers are laptops or something else needs to be detailed.