How to install the touchpad buttons on the keypad induction cooker

This is because you didn't install a driver for the hardware. The computer recognizes that it automatically pops up, and the hardware cannot be installed because the driver is not found. That's why that box popped up.

Solution: Right-click on My Computer, click Properties in the pop-up drop-down list, open the Properties panel, click Hardware, Device Manager. Look for it in the device manager to see if there is any hardware, which is indicated in yellow or with an exclamation mark or question mark.

If yes, the hardware does not have a driver. Double-click on it to bring up the installation wizard.

He helps you find the driver of the future. It's also a reminder operation. But external hardware, no drivers.

A class box will also pop up. Hope mine can help you.

To put it simply, the system detects that you have new hardware installed, so this dialog box pops up.

Detected to have hardware and if you don't want to enable it --

Right-click on My Computer - Properties - Hardware - Device Manager.

See if there's a question mark in it, just disable it.

It's you plugged something into the computer.

This means that your machine has been loaded with this hardware, and you need to manually install the hardware driver, but you have found new hardware and need to reinstall the driver.

A new driver or software has been discovered.

There's only one way to say it, and that's whether your hardware is powered or not!

This question! Generally don't bother! If it pops up often!

Can be installed manually! Just open it and go to the next step! If not!

It's very convenient! It must be that you have external hardware on your computer that does not have a driver, and you can drive it next time.

There are controls for you to install, but you have to look at the security controls first, and some of them have viruses.

How to replace the universal motherboard of the induction cooker with touch keys with the ordinary button panel of the induction cooker: 1. Remove the button board and main line of the original induction cooker with touch buttons, and only keep the fan, wiring and intermediate furnace surface temperature sensor. 2. Fix the motherboard on the chassis and cut the heat sink close to the fan.

3. Connect the wire reel, wind bridge machine, furnace surface temperature sensor, etc. in turn. 4. Install the electric cartridge magnetic furnace with touch button into the button board of the original machine. Note that it is not recommended to modify it for safety reasons.

Induction cooker is a kind of dining utensils commonly used in modern families, which is convenient and fast to use, and is favored by people. However, in long-term use, sometimes the touch button will fail and be damaged, which will affect the normal use of the user. This article will introduce some repair methods for induction cooker touch buttons.

1.Replace the damaged touch screen: If the touch buttons of the induction cooker are damaged, you can repair the touch screen by replacing it.

Before replacing, you need to purchase the same model of touch screen as the original touch screen, remove the original touch screen, and then install a new touch screen.

2.Check the touch button cable: Sometimes, the original reason for the failure of the touch button of the induction cooker may be that the cable is loose or damaged. At this time, it is necessary to check whether the connection cable is in good contact, and if it is found that the contact is poor or damaged, it should be replaced in time.

3.Reinstall the touch module: Sometimes, the reason why the touch button of the induction cooker fails can be because the connection of the touch module is loose. In this case, it is only necessary to re-disassemble and install the touch module.

4.Factory reset: If the reason why the touch button of the induction cooker fails is because there is a problem with the touch screen setting and cannot operate normally, then you can press and hold the switch on the touch screen to enter the mode of factory reset and reset the settings.

5.Replace faulty components: If none of the above repair methods can solve the problem, you may need to replace the components inside the induction cooker. In this case, it is necessary to use the help of a professional repairer to replace it.

In general, for the problem of induction cooker touch button failure, we can first check whether the connection line is good, and eliminate the simple front imitation fault, if it cannot be solved, it needs to be repaired by replacing components or replacing the touch screen. Of course, if you don't have the ability to repair electrical appliances, you need to turn to professional maintenance personnel.