Microphone Silent 130, What s the deal with Microphone Silence?

Double-click "Sound" - "Options" - "Properties" at the bottom right of the monitor, in the drop-down menu, check the microphone options, then "OK", and then remove the "mute" of the microphone.

If that doesn't work, try another hole, maybe you're plugging in the wrong hehe, and it may be that you broke a part when installing the program, and that thing isn't very reliable When you reinstall the program, some people like to clean up the dust inside It helps to speed up the computer

Maybe the sound of your microphone is not on, double-click "Sound" - "Options" - "Properties" at the bottom right of the monitor, in the drop-down menu, check the options of the microphone, and then "OK", and then remove the "mute" of the microphone.

It should be a sound setting issue. Open the sound settings panel in the lower right corner of the taskbar, try to click in turn in it, don't be afraid to make mistakes, I believe you will be fine.

That may just not be the driving good! The sound card is not so complicated, just how to get a few in the control panel, as long as it is not muted! It can be used.

Most likely, there is a problem with your drive.

Change the system disk from the do to see. It may also be a problem with the system disk.

China's piracy system is about to stun Bill Gates.

Take a look at the system disk!

You're not fighting alone

It's the same in my family!

One: The microphone signal line is not inserted into the computer interface Many friends use the computer and like to plug in only the audio cable, so we can listen to it, watch movies, etc., but chat with each other, the microphone is no sound, so it is generated, you can hear each other, and the other party can't hear you speak.

2: The microphone is not turned on in the audio settings Generally, the system turns on the microphone function by default, but it is also possible that the user has set it or accidentally turned off the microphone, in which case the microphone cannot be used. Workaround:

If you troubleshoot one, then check whether the microphone function is turned on, find the sound icon in the lower right corner of the computer desktop - right-click on it and select "Adjust Audio Properties" to enter the audio settings interface, adjust the audio properties, switch to the voice option, check whether there is a sound device and a recording device, and check whether the corresponding sound is adjusted to the lowest, if there is no device, you should select the setting from the drop-down options, and increase the volume to the maximum. After the setting is completed, it is determined, and the situation that the microphone device is not turned on can generally be solved.

Three: Disable the sound card device If the sound card is disabled, the natural microphone has no sound, and the computer has no sound in this emotional chain of muffled conditions, so you must not listen**, and you cannot use the microphone.

Hardware failure such as microphone interface or microphone cable does not work will cause the microphone to have no sound output, the solution you can use the elimination method, such as taking the microphone to other computers to try whether it is useful, if it is useful, it means that the microphone is not problematic, the problem lies in the computer, return to the above ideas to check; If the microphone is still silent, it means that there is a problem with the microphone, and you can replace it with one to try.

If:

1. The wheat is completely good (it can be used on other machines).

2. The jack is not plugged incorrectly.

3. The microphone in the volume control is not muted.

4. The sound card driver has been reinstalled n times, and the new and old ones have been tried5. Volume control Attribute Recording Microphone The following tick has been marked 6. The volume can be adjusted, but the flat tone cannot be adjusted, because this column is gray, which is the key to the problem. In addition, the bass and pitch in the advanced properties of the microphone are gray and cannot be adjusted, and the pointer points to the lowest volume, which is also a problem.

7. The jack in front of the host (the installation was installed by the installation file rental personnel, so it was feasible before) and the jack line behind the host have been tried, the same phenomenon.

I don't know if it's a conflict with some software, or it's a problem with the system, or it's a hardware problem, I can't find any reason. Some friends said that they had encountered such a situation, and the system was successfully reinstalled, and some friends said that it was still the same after reinstallation, I really don't want to reinstall the system, and I hope that friends who have had similar experiences will leave some of your experience, of course, if I find the answer to the problem, I will also send it for your reference.

Happy New Year to the subject, congratulations on your successful problem solving.

For this problem, I summarize the possible causes of the failure, so as to facilitate future generations

No voice. Is there any abnormality in the system? Check it with antivirus software first.

Is mute turned on? Look at the audio properties, turn on and turn up the microphone volume. It can also be adjusted on the headphones.

Is the voice software set up incorrectly? Check the software settings to see if voice is disabled.

Is the sound card driver installed properly? Looking at the Device Manager, the audio icon has no question marks or exclamation marks.

Is the interface loose? Try reinserting it once. (Green is the headset and red is the microphone).

Broken headphones? Replace it with another one.

To confirm that there is no problem with the sound card driver, it is recommended to use the original driver.

Then plug the microphone into the MIC (red) hole at the back of the case for testing, if the microphone has sound, it means that the cable from the motherboard F audio to the case panel is not plugged in correctly; If there is no sound, you need to check whether the settings are correct.

Double-click the small speaker in the lower right corner of the desktop (if there is no small speaker, go to the "Control Panel" - click "Sound and Audio Devices" - tick "Put the volume icon into the taskbar" - OK), bring up the "Volume Control", select "Options" - "Properties" - tick "Microphone" - confirm; Then "Volume Control" - at "Microphone" set to debug to sound. If there is still no sound, it may be a fault of the motherboard.

If the sound card is a Realtekr, you also need to install the driver of the microphone Realtek HD Audio Output. That is, the driver used for recording is MIC in at Front Panel (Pink).Then set up the front and rear interfaces on the sound card control panel, otherwise there will be no sound with an excuse!

In addition, it is best to try both the audio output ports in the front and back.

Finally, it's true that some systems that are too lean can cause the microphone to not work properly. A deep XP system is recommended.

The microphone is silent.

My computer's microphone is silent.

Recommend! How to deal with the microphone without sound.

Is there a problem with the software settings you are chatting with others?

Possibility 1You're okay with the other party's problem.

2.The other party fooled you