-
This one is set up in BIOS for you!!
-
Take Dell G5, Win10 system as an example, the specific operation method is as follows:
Method 1: Find the numlook key on the right side of the computer keyboard, the number key at the top left of the number key, or bring up the on-screen keyboard that comes with the computer, and tap it.
Method 2: 1. Find the fn key located at the bottom left of the computer keyboard;
2. Find the F8 key of the computer keyboard;
3. Press and hold these two keys at the same time to unlock the keyboard.
In addition, if the computer keyboard cannot be typed, you can also try to unlock it with OSK system commands. First, find another device that can type, type the three letters "osk", then copy it to the device with the keyboard locked, paste it into the running input box, and then click the numlook key.
If not, you can also restart the computer, you can try to hit the computer button "F2" to see if you can enter the BIOS safe mode, if you can enter, it proves that the computer keyboard can be used at this time. If it still doesn't work at this time, it is also possible that the keyboard is broken, in this case, you can send the computer to the designated repair point for repair.
It's important to note that this answer applies to most models of Dell computers.
-
The steps are as follows: 4. If you have not connected to the external keyboard recently, you can find the "fn" key in the computer keyboard, which is also known as the "second function key", because when you press this key and then press another key with two functions, the second function will appear in that key, as shown in the figure;
5. Then find the "F8" key, because the second function of this key is the function of the "NumLock" key, and press the "FN" and "NumLock" keys at the same time to complete the unlocking of the key, as shown in the figure.
-
The keypad is locked, and it can be unlocked using the fn+num keys.
1. FN+ESC: Turn off and turn on the camera.
2. FN+F1: Put the computer into sleep mode.
3. FN+F2: Turn off the LED screen backlight.
4. FN+F3: Switch to other connected display devices.
5. FN+F4: Switch between widescreen and normal mode.
6. FN+F5: Call the wireless device to turn on and off the control interface.
7. FN+F6: Enable and disable the trackpad.
-
I think under normal circumstances,Computer boot keyboard,If you want to unlock it,You can go directly from the personal homepage.,It's still very convenient.,You can try it.,It should be fine.。
-
The computer's boot keyboard can be unlocked directly for him, so it is still very convenient to use.
-
1. Restart the computer, press and hold F2 during the reboot process of the computer, and check whether it enters the BIOS settings.
2. Assuming that you can't enter the BIOS settings, you can basically determine that your keyboard data cable is loose where it is connected to the computer, and if you can, you can simply send it to the logistics service for checking.
3. If you can enter the BIOS settings, it is a problem with the settings, and you can observe the situation in the system under what circumstances the keyboard will fail.
4. Press fn or shift or ctrl for the notebook and try any of the keys + numlk.
-
If just the number keys of the keyboard are locked, find "numlock" on your keyboard or"fn"+"nmlk1"key, if there is a separate "numlock", press it once to unlock it. If it's a key combination on the keyboard, press and hold at the same time"fn"+"nmlk1"button to unlock it.
If the entire keypad is locked, press the following to unlock it:
1. First of all, turn on your computer, and when you enter text, find the position on the left side of the keyboard, there is a fn key.
2. Then find the number 7 on the keyboard with an F8 key, and press and hold the Fn plus F8 together to complete the operation.
3. Then at this time, you can see that the keyboard has been unlocked, and you can enter normally, so that the unlocking operation of the keyboard is completed.
Notes:
If the above methods don't work, then check if there is something stuck on the keyboard, such as melon seed skin or something, you put the keyboard up and knock it, if it still doesn't work, or if it gets into the water, the keyboard is broken! Go buy a new one.
-
How to remove the keypad lock.
To be precise, the keyboard has three locks One, the case conversion lock is the lower left corner of the keyboard Count up the third caps lock two, pause and resume the lock (1, scroll lock was very useful in the DOS period, due to the display technology at that time, the screen was limited to display only 80 characters wide and 25 lines of text, when reading documents, it is very convenient to use this key to scroll the page. With the development of technology, the role of the scroll lock key is getting smaller and smaller after entering the Windows era, but it is still somewhat useful in Excel: if you use the page turn key (such as page up and page down) when the scroll lock is off, the selected area of the cell will move accordingly; Conversely, if you want to scroll without changing the selected cells, just press scroll lock.
2. Pause and interrupt the pause button refers to the pause button, for example, when you start the system, press the pause button, the system self-test will be temporarily stopped, and you can press one button to continue. ) is the top row of the keyboard The penultimate pause break, numeric lock used to open and lock the numeric keypad (commonly known as the keypad) is in the upper left corner of the keypad area
-
Is your keypad locked?
If there is a num lock key above the keypad, press it once to open the keypad.
-
What should I do if the keyboard key is locked.
-
It may be that your computer has an external keyboard in the past, you can reconnect the external keyboard and then press the [Numlock] key to unlock it, or the FN and [NumLock] keys to unlock it; It is also possible to use the [fn] key and the shortcut key to dismiss the global keyboard key. Here's a closer look:
1. It may be that when you are using the external keyboard recently, press the [numlock] key to lock it, you can connect the external keyboard and press the [numlock] key again, and it will return to normal;
2. If you have not connected to the external keyboard recently, you can find the [fn] key in the computer keyboard, which is also called the [second function key], because when you press this key and then press another key with two functions, the second function will appear in that key; Then find the [F8] key, because the second function of this key is the function of the [NumLock] key, press the [Fn] and [NumLock] keys at the same time, and the unlocking of the key is completed;
3. Find the [NumLock] or [FN] + [NMLK1] keys on your keyboard, if there is a separate [NumLock], press it to unlock it. If the keyboard is an assembly, press and hold the [FN] + [NMLK1] keys at the same time to unlock it;
4. Some notebooks can be locked with the entire keypad, generally there is a lock icon in F1-F12, press [FN] + [Keypad Lock Key] to unlock it; If the keypad lock is the [F11] key, press [Fn+F11] at the same time to unlock it. (Some keypad locks are unlocked by pressing FN + right alt + lock key); 】
-
Control Panel, Keyboard, Hardware Settings, Off. There will be an icon inside the F1-F12 buttons, and one of them will have a slash drawn on it. Hold down the fn key, then press that key and you're good to go.
-
The keypad is locked, and the steps to unlock it are as follows:
1.Locate the keypad lock key location. It will usually be a lock icon. If you don't have an icon, it's probably F11 or F12.
2.Press the FN + keypad lock key to unlock it. If the keypad lock is the [F11] key, press [Fn+F11] at the same time to unlock it. (Some keypad locks are unlocked by pressing FN + oil right ALT + lock key).
-
If the mouse still works, it can be saved, the steps are as follows Click: Start - Control Panel - System - Hardware - Device Manager - Keyboard (Human Input Device) Click: Action - Uninstall (uninstall the keyboard driver) Click:
Operation-Scan Detects Hardware Changes OK! That's how my ibook solves the keypad lock problem, and it is done in 30 seconds.
Enter OSK in "Start" and "Run", click "OK", bring up the on-screen keyboard that comes with the system (as shown in the figure), see it, the NLK framed in red is the numlock key we are looking for, click it with the mouse, and the unlock is successful! Don't get complacent, there's another question! The O and K keys are locked!
In other words, you can't enter this command! What to do? Don't forget that we also have a great copy feature!
First, create a new notepad or other document on another computer, name it OSK, save it, and then copy it to the book with the Numlock key locked on the USB flash drive. You know what to do, right? Copy the file name, paste it into the "Run" input box, and click the "OK" button.
-
If you press the scroll lock button and there is no response, then check if there is something that stuck, such as melon seed skin or something, you put the keyboard up and knock it, if it still doesn't work, or if it gets into the water, the keyboard is broken! Go buy a new one.
If it's a notebook! It can only be sent for repair!
Added: Is the keyboard good? So do you press scroll lock and there is a response?
One last addition: Nothing is good to press so how do you confirm that the keyboard is good?
Isn't it just that the keyboard is broken? Just buy a new one! No need for a headache.
-
1. It may be that when you are using the external keyboard recently, press the numlock key to lock it, you can connect the external keyboard and press the numlock key again, and it will return to normal;
2. If you haven't connected to the external keyboard recently, you can find the fn key in the computer keyboard, which is also known as the second function key, because when you press this key and then press another key with two functions, the second function will appear in the boring key; Then find the [F8] key, because the second function of this key is the function of the [NumLock] key, press the [Fn] and [NumLock] keys at the same time, and the unlocking of the key is completed;
3. Find the numlock or fn+nmlk1 key on your keyboard, if there is a separate numlock, you can unlock it by pressing the hole. If the keyboard is an assembly, press and hold the [FN] + [NMLK1] keys at the same time to unlock it;
4. Some notebooks can be locked with the entire keypad, and there is a lock icon in F1-F12, just press the FN + keyboard lock key to unlock it; If the keypad locks the F11 key, press FN+F11 at the same time to unlock it. (Some keypad locks are unlocked by pressing FN + right alt + lock key);
Have you changed your card?
If you set the security item to your phone, then you will be asked to enter the security code after you change the card, so as to prevent others from using your phone! >>>More
How to turn on the numeric keys on the keypad and how to make the numeric keys on the keypad visible.
2. If you can use it, re-establish the mapping of computer keys, select "Keymapper" or KeyTweak (required**). If that doesn't work, you can map the keys you don't use. >>>More
The problem of plugs, try to change a jack, there are many jacks on the chassis, you can try them one by one, I used to have this problem, and it is recommended that you choose a rectangular plug when buying a keyboard and mouse.
The computer mouse and keyboard didn't respond to what's going on.