Street sweepers are often hit, what to do

So what else can I do! Ask someone to fix it!

The street sweepers are on both sides of the road when they sweep the road, and they also turn on the lights scattered left and right.

In general, you can see from a distance that the work truck is working. If you want to hit it up!

No one can do that! If it doesn't work, just call it all the way like a police car, and there shouldn't be anyone hitting it!

Generally, the road sweeper needs to install LED arrow lights at the rear of the boxThis arrow light is very eye-catching, and it is necessary to turn on the warning when working, and the vehicles driving behind keep a distance. In this way, the safety of the operation can be effectively guaranteed.

Street sweeper arrow lights.

Extended reading: Precautions for the operation of street sweepers.

1. Before starting or operating the working device, observe whether there are personnel and obstacles around the vehicle, carefully observe whether there are vehicles and pedestrians before and after, close the door, turn on the turn signal, and sound the horn to start.

2. When the engine is running, it is strictly forbidden to stand between the front and rear tires of the vehicle, between the boom and the front frame, and between the front and rear positions of the sweeper.

3. The water temperature should not be lower than 50 when starting, and start in low gear to avoid rapid acceleration.

4. When the road sweeper is driving, it is forbidden for anyone to get on or off the car.

5. It is strictly forbidden to drink and drive, and it is not allowed to smoke, eat, drink, chat, play and listen to headphones when driving a vehicle.

6. Keep the driving speed for 15 h.

7. When the vehicle is driving on rainy, ice and snow, muddy and oily roads, the vehicle should pay attention to anti-skidding, avoid rapid acceleration and emergency braking, so as to avoid loss of control and cause accidents.

8. Pay attention to the working condition of the vehicle, brake, steering, lights and other parts that affect safety, and when there is a failure on the way, you must stop for inspection, and you are not allowed to risk driving.

9. When the road sweeper is cleaning, the material should be poured out in time when the bucket is full, and the opening and closing of the upper cover of the bucket should be slow and uniform to avoid large impact.

10. When there are entanglements on the sweeper roller of the road sweeper, it should be cleaned up in time to prevent the normal operation of the cleaner from being affected.

11. The minimum height of the sweeper sweeper roller adjustment is that the sweep roller substrate can not be in contact with the bucket, and it should be checked and adjusted in a timely manner, and the cleaning cover plate should be adjusted in time if it is found to be tilted, so as to prevent the deflection angle from causing damage to the sweep roller.

12. Before the vehicle is turned off, it should idle for 3-5 minutes, and the turbocharger speed can be turned off only after the speed is reduced.

13. After parking, put each joystick in the neutral position, cut off the power supply, pull the handbrake, and slowly move the joysticks to reduce the residual pressure of the hydraulic system.

14. Close the doors and windows, lock the door, park neatly, and fill in the use record.

According to your actual situation, the warning lights of the street sweeper should be made bigger and brighter. If you have the need for a street sweeper, you can contact me with my registration number.