How do you study for the second construction mechanical and electrical professional course?

1. Don't think of Erjian as a difficult exam, treat it lightly, and it is important to maintain self-confidence;

2. Since the biggest feature is memory, then simply put, you just need to memorize all the knowledge in the books, here is not to say that you have to remember, unless you are a genius, but this exam only needs to pass the line, so remember most of the content;

3. Regarding memory, there are only three exams for the second construction, and each book is not thick (once I took the basic exam for registration of geotechnicals, a total of 19 disciplines and 1400 pages of books, that is called thick), the first time I read it, I must feel thick, after all, I will not have more knowledge, but the books are the thinner and thinner the more I read, the faster I read, the first time you read it may take a month, the second time it may only take half a month, and when you read it for the tenth time, you may finish it in one day (don't say I'm exaggerating, I can read the textbooks of any exam dozens of times, and I can even turn over the books half an hour before the exam), so don't feel that you can't finish reading them when you first read them, calm down and read all the books steadily, and you will feel much more relaxed later;

4. About class registration and charging questions. This is based on personal circumstances, and it is not possible to say whether it is good or bad to register for classes, some people can only learn to enter by listening to classes, so they will register for classes, and some people will see that the efficiency is very high, so they will learn by themselves. It's a matter of luck to bet on this thing, it's hard to say.

5. About past questions. The real questions must be done, especially the past three or five years, only the real questions can really test your learning results and plan the focus of the next round of review, and through the analysis of the past few years, you can also roughly have a judgment on the direction of this year's exam.

6. About review materials. Now there are all kinds of review materials, whether it is text courseware or **, or all kinds, in fact, the best textbooks are books and real questions, don't believe it, all the things are in it, even if the exam questions of a certain year are a little overclass, but as long as you review well, it will definitely not affect you to cross the line;

7. The last thing I want to say: The most important thing in any exam is attitude, no matter how much you get good review materials, no matter how much money you spend on tutoring classes, you don't learn, you want to rely on luck to take the test, it's all nonsense, from now on to read a few hours of books every day, I think there is no reason.

I just took the exam last year (three subjects at once), and the professional book is divided into two parts, the first 100 or so pages are knowledge points, mainly for multiple-choice questions, and the last 100 pages are case analysis questions, mainly for the big questions of the exam. I feel that professional courses mainly rely on big questions to get points, and multiple-choice questions are not easy to do, with a full score of 60 for multiple-choice questions, and it is almost the same if you can get 30 points, because there are a lot of knowledge points in multiple-choice questions, and it is not easy to remember. I suggest taking a look at the professional course first** Draw a picture of the knowledge points, and watch it a few times, because there are too many things, and I personally feel that it is beyond the ability of human memory, so you just look at it very seriously and probably watch it a few times The effect is the same.

Then select the question and do the mock questions directly (don't do the workbook). The synopsis should first take a look at the book (don't take it too seriously, just have an impression) and then do the mock questions directly, the key is to look at the big question mode of the mock questions, because the question types of the big questions are relatively fixed every year. Good luck with your exams!!

Make a study plan: It is important to plan your studies well in advance, regardless of the subject you are taking, and it is best to start planning as soon as you decide on the exam. The average candidate doesn't have much time to read and study, and making a study plan allows us to determine how long we want to read the book every day, how many pages we want to read, and how long we want to read according to our own situation.

Put into action: In the study plan, the review time of each subject should be reasonably allocated, and the practice should be twice the sum of the time of the three basic courses. For students who only have one subject left, they should pay more attention to the connection between practice and other subjects.

Read through the textbook: First of all, you must have a general understanding of the textbook, and then have a deeper grasp of the textbook through the teacher's explanation.

Distinguish the importance and grasp the key points: Under normal circumstances, if you want to distinguish the importance of knowledge in the textbook, you need to combine the practice of real questions to strengthen your understanding and memory, and master the rules of questions.

Look at the books of the electromechanical major.

Usually I just read a book or go to a training class by myself.

The mechanical and electrical major of the second-level constructor is not difficult to take. The basic subjects of "Construction Management of Construction Engineering" and "Construction Engineering Regulations and Related Knowledge" tested in the second construction examination of mechanical and electrical majors require candidates to carefully understand, read and memorize. The "Management and Practice of Mechanical and Electrical Engineering" is more difficult for the professional subject.

Mechanical and electrical practice should master mechanical drawing, engineering mechanics, mechanical design, hydraulic transmission, mechanical manufacturing, electrical and electronic technology, computer application, single-chip microcomputer application, motor drag and control, factory power supply, machine tool numerical control technology, mechanical and electrical equipment failure analysis and maintenance, etc.

The number of applicants for the second construction mechanical and electrical major is relatively small, the pass rate is high, although the content of the examination is more, but it is relatively basic, as long as the pass rate is still very high.

1. Chapter 1 Technology.

Lifting technology, welding technology, installation technology of mechanical equipment, electrical, plumbing, ventilation and air conditioning, and elevators can all be used as test points for case questions.

2. Chapter II Management.

Contract management, procurement management, schedule management, occupational health, safety and environmental management, quality management, resource management, and trial operation management have a higher probability of problems; Others, such as bidding management, construction organization design, cost management (including pre-settlement), and coordination management, may also assess the questions, but there will be no major problems.

3. Chapter III Regulations.

The Special Equipment Safety Law is easy to become the point of case questions, and the question of "electricity" in the Electricity Law has gradually become a high-frequency test point; The two quality acceptances (mainly assessment of the organization and acceptance procedures and the handling of problems in the acceptance) are usually combined with the quality management in Chapter 2.

The second construction mechanical and electrical major is easier to test.

The certificate of second-level construction engineer of organic electrical engineering can be used as the project manager of the construction project of the construction project in the construction enterprise unit with the corresponding qualification.

The gold content of the second construction electromechanical is very high, and the second construction mechanical and electrical construction engineer is a compound person who understands management, technology, technology, economy, laws and regulations, etc., and has a high comprehensive quality, not only has a theoretical level, but also has rich practical experience and strong organizational ability.

The role of the second construction of mechanical and electrical is relatively large, after the mechanical and electrical construction engineer is registered and employed, the name model of the construction engineer can be used as the project manager of the construction project, engaged in the management of other construction activities, and engaged in other businesses stipulated by laws, administrative regulations or construction administrative departments.

Mechanical and electrical engineering can be engaged in mechanical and electrical equipment design and development, operation and maintenance, sales and management and other aspects of senior engineering and technical personnel, in large-scale projects are indispensable, so the holder of the second construction mechanical and electrical professional certificate is also very popular, certificate treatment is also very good.

There are 6 different practical majors in the Constructor II examination, among which E&M Engineer is one of the more popular majors, and I will share the specific content as follows.

According to the experience of the second construction examination, the second construction of mechanical and electrical is not a difficult professional in the examination, the scope of knowledge involved will not be too wide, the professional characteristics of the examination are relatively strong, most of the candidates are mechanical and electrical majors or mechanical candidates, in addition to novice candidates, a considerable part of them are the increase in the examination of the mechanical fiber of the electric professional, the prospect of the second construction mechanical and electrical major is very optimistic.

The question types of the exam are mainly objective questions and subjective questions, the subjective questions are mainly case analysis questions, and the objective questions are mainly multiple-choice questions and multiple-choice questions. The full score of the mechanical and electrical practice test paper is 120 points (of which case questions account for 80 points), and the passing standards of the second construction practice subject vary from province to province, roughly ranging from 45 to 72 points.

1. Read a book. When reading books, you can combine the exam syllabus, Jian Xiao Erjian exam follows the exam syllabus of the previous year, and candidates can continue to use the syllabus of the previous year's mechanical and electrical engineering exam when preparing for the exam.

In addition, the reference textbook for the practical examination of mechanical and electrical damage engineering has been revised and deleted in many places, and it is recommended to pay more attention to learning and mastering the changed content when preparing for the exam.

2. Do questions. The answers to the mechanical and electrical engineering practice test paper include 20 multiple-choice questions, 10 multiple-choice questions, and 4 case analysis questions.

According to the experience of previous years' examinations, the case questions are the most difficult, and you can usually do more test questions to practice, and take the second construction mechanical and electrical practice subjects, whether it is self-study or report to the tutorial class to listen to the lectures, you need to be serious and long-term persistence in studying and preparing for the exam.

The content of the second construction electromechanical exam is very complicated and trivial, a little difficult, and the more difficult subject is practice. The longer it takes to prepare for the second construction from scratch, the better, which takes about 5 months.

The second construction mechanical and electrical major is mainly to test some content of mechanical and electrical engineering, involving mechanical and electrical engineering professional technology, mechanical and electrical engineering common materials and engineering equipment, mechanical and electrical engineering projects and construction management and other aspects.

The content of the second-level constructor electromechanical exam is still relatively complex, and candidates need to prepare for the exam according to their actual situation. Because this major itself has a lot of advantages, it will be very popular.

Mechanical and electrical engineering belongs to the installation project, which belongs to the type of work with high technical content and good treatment, so it will be more difficult than the construction project in terms of the difficulty of the examination, and the salary is higher than that of the construction project.

There are three examination subjects for the mechanical and electrical major of the second-level aerial auction constructor, namely "Construction Management of Construction Engineering", "Construction Engineering Regulations and Related Knowledge", and "Management and Practice of Mechanical and Electrical Engineering".

Construction Management of Construction Projects: Multiple choice questions: 70 questions, 1 track; Multiple choice questions: 25 questions, 2 points. 120 out of 120 points.

Professional Engineering Management and Practice: Multiple choice questions: 20 questions, 1 track; Multiple choice questions: 10 questions, 2 points; Case questions: 4 questions, accounting for 80 points. 120 out of 120 points.

There are three courses for the mechanical and electrical major of the second-level constructor, namely: the public course is Kaidu's "Construction Management of Construction Engineering", "Construction Engineering Regulations and Related Knowledge", and the professional course is "Mechanical and Electrical Engineering Management and Practice".

The eligibility criteria are as follows:

The passing score varies from region to region across the country, and the information published by the local personnel examination network should be the main one. The qualification criteria shall be determined by each province according to the actual situation, but shall not be higher than 60% of the total score. The preliminary statistics of the passing standards of each subject of the second-level constructor examination are as follows:

Engineering Regulations and Related Knowledge" is 45 points and 60 points; "Construction Management of Construction Projects" is 45 points and 72 points; "Professional Engineering Management and Practice" varies according to the subject and provincial audit type.