-
Anonymous users2024-02-051 Check to see if the LON light on the back of your case is on.
2 If it's bright, see if it's flashing, 3 There is no problem with the above 2 items, which means that your network card is good, the crystal head is good, not your computer hardware problem.
4 Turn on your online neighbor to see if your network connection has received packets, and send packets.
5 See if your cat's lights are flashing.
6 If not, then call ** where you will be equipped with broadband.
That's pretty much it.
-
Anonymous users2024-02-04Right-click on "Internet Neighbors", there is an icon under "Broadband", just create a shortcut for it on the desktop.
If not, click Start - Settings - Network Connection - New Connection Wizard and establish a connection according to the wizard.
-
Anonymous users2024-02-031.How do you use the Internet? ADSL dialing?
To create a new network connection, how to do it: Turn on the network connection, click to view the network connection, and follow the prompts inside to set it up step by step. Finally, it's OK to create a shortcut on the desktop.
-
Anonymous users2024-02-02Look at the online neighbor attributes, check the display when connecting, enter cmd in the operation to see if ipconfig all has its own IP, if there is any you want to see if there is a fault with your own line or network card!
-
Anonymous users2024-02-01Where is it missing? Control Panel, if yes, go to Control Panel - Network Connections, and click Add Network Connection on the left.
-
Anonymous users2024-01-31We recommend that you do the following:
1. Check whether the mobile phone network connection is stable, and it is recommended to try to change the wireless network. An update software version attempt.
3. Back up the data (contacts, SMS, **, etc.), restore factory settings and reinstall the attempt.
4. Update the mobile phone system version. Other problems: 1. The root uses the router's "Lazy Mode One-click Setting" to configure the router's Internet access parameters, and there may be a problem that the mobile phone can connect to WiFi but cannot access the Internet, and the wifi encryption authentication type is selected "Automatic" by default, which causes the problem to occur, and the wifi encryption authentication type is selected "Automatic" by default.
-
Anonymous users2024-01-301. Open "Control Panel" - "Network and Sharing Center" - "Change Adapter Settings" - right-click to select the currently used network card - click "Disable" in the menu. Then right-click and select the current NIC - click "Enable" in the menu. The purpose is to release all network parameters of the current NIC and reconfigure it.
In most cases, the fault of obtaining the parameters of the NIC can be solved.
2. Check the DNS in the network configuration: Although the gateway we connect to the router is normal, the hungry hall is that when the DNS in the network configuration is lost, or the DNS server in the configuration cannot be resolved, it will also cause a network outage. Open the Command Prompt window and type ipconfig all in the cursor to view the DNS parameters in the current network configuration.
In general, you can set the "Preferred DNS" to the gateway and the "Alternate DNS" to "Buried Hidden to "OK.
The above is completely invalid, the solution is to right-click on the online neighbor - properties - right-click on the local connection - select the attribute - drop down to select the Internet protocol - click on the property - choose to use the following IP address, you fill in the different numbers for the computer that shares this router 0 255), the mask does not need to be filled in by yourself, the default gateway is:. As for the DNS settings below, you can go online and check your local DNS and fill it in. Another way is to go into the router and select the running status - see the DNS server entry, which is your DNS, and fill in the DNS settings there. >>>More
Hello. First of all, if you use your mobile phone card to surf the Internet, first make sure that the mobile phone card has opened the GPRS service, if you want to use wireless Internet access, you need to set a password, you can look at the manual, which has detailed operating instructions, because it is not easy to understand here. Also, if it really doesn't work, restore the factory settings The password is 1234 Before restoring, you must first back up your SMS** number Don't store it in the phone You can move it to the card or the recovery is not there. >>>More
That could be a problem with the DHCP server, you can ask the network administrator, they must be dying. >>>More
If you confirm that it is not a virus problem, you can see whether the data in the DNS option under the IP protocol is correct, if the MAC address can not be seen, you can consider reinstalling the network card, if you do not want to reinstall the network card, you can first disable the network card and then restart the machine, and then enable the network card. If this still doesn't work, you can use 360 or software tests such as Optimizer and Master Lu to fix it.
The exclamation mark may be limited in the network, at this time it does not affect the Internet, if you are using a local area network, you can reset the IP may be good. Another is because there is a problem with your line interface, and it may be good to try it with a different connector