When the Bora sedan is driving, the display will appear with a maintenance sign, what to do

The new Bora this car is 7500 kilometers to do the first warranty, the start of the instrument on the maintenance of the sign, this is to prompt you car has reached the number of kilometers to do maintenance, so you should take the time to go to the 4S shop to your car maintenance, the first warranty is very simple, the main thing is to change the oil, oil filter and air filter, the time required is relatively short, at most half an hour can be done, and the first warranty of the new car is generally free. If you don't go to maintenance, of course, the car itself is focused on maintenance, regular maintenance can greatly reduce the failure rate of the car, on the contrary, if you do not maintain or maintain irregularity, this will lead to a great increase in the failure rate of the vehicle, so timely maintenance on your own car can be said to play a good role in protection, so that the vehicle remains in a very good state, when you go to the 4S shop or service station after maintenance, the maintenance staff will use the computer to clear the maintenance signs displayed on the car instrument. The next maintenance time is 15,000 km, which means that the maintenance sign on the instrument will be lit up when it is almost 15,000 km.

The manufacturer of the new Bora car stipulates that the maintenance cycle is 7500 kilometers to do a maintenance, and the maintenance items are carried out in accordance with the items specified in the repair manual.

It's long overdue! If you go to the 4S store, someone will help you get it. Or read the instruction manual by yourself, it seems to be taught. If you haven't done the first insurance yet, it's better to do it.

1. A, it's time for maintenance; b. Forgot to eliminate maintenance tips during maintenance.

2. Go to the 4S shop to do the maintenance and let the repairman eliminate it. You can also ask the repairman to turn off the maintenance light.

The display screen in the dashboard of the new Bora is fixed with the lower part of the car outside the thermometer, the number of cruise times is slippery and embedded, and the passenger is stupid to let this seat display, and there is also a display function that can be switched, and the specific operation steps are as follows:

1. Press the steering wheel instrument switch button.

2. Display the driving mileage in turn.

3. Average fuel consumption.

4. Current fuel consumption.

5. Digital speedometer.

6. Subtotal mileage.

1. First turn off the ignition switch and turn off the vehicle. 2. Then press and hold the "button" button under the dashboard with your left index finger. 3. Turn on the ignition switch with your right hand, note that your left hand needs to hold down the "button" until the English letter of maintenance service is displayed on the instrument, and then release the button.

4. After releasing it, you need to press the "5. After the above steps are completed, the maintenance prompt light will be eliminated.

1. First turn off the ignition switch and turn off the vehicle.

2. Then press and hold the " button under the dashboard with your left index finger

Button. 3. Then use the oak and the right hand to turn on the ignition switch, and pay attention to the left hand needs to be held all the time".

button until the letter of service is displayed on the meter, and then release the button.

4. After releasing it, you need to press the " under the dashboard again within 30 seconds

Button. 5. After the above steps are completed, the maintenance indicator light will be eliminated.

6. If the operation is completed and the ignition switch is turned on, there are still maintenance tips, then you need to repeat the previous steps again.

1. First turn off the ignition switch and turn off the vehicle.

2. Then press and hold the " button under the dashboard with your left index finger

Button. 3. Turn on the ignition switch with your right hand, and note that your left hand needs to be held down all the time

button until the letter of service is displayed on the meter, and then release the button.

4. After releasing it, you need to press the " under the dashboard again within 30 seconds

Button. 5. After the above steps are completed, the maintenance indicator light will be eliminated.

6. If the operation is completed and the ignition switch is turned on, there are still maintenance tips, then you need to repeat the previous steps again.

1. First turn off the ignition switch, and the vehicle will turn off and stare at the fire.

2. Then press and hold the " button under the dashboard with your left index finger

Button. 3. Then use your right hand to turn on the ignition switch, and note that your left hand needs to be held down all the time

button until the letter of service is displayed on the meter, and then release the button.

4. After releasing it, you need to press the " under the dashboard again within 30 seconds

Button. 5. After the above steps are completed, the maintenance indicator light will be eliminated.

6. If the operation is completed and the ignition switch is turned on, there are still maintenance tips, then you need to repeat the previous steps again.

Summary. The method of eliminating the maintenance tips of Volkswagen Bora is as follows: 1. Close the key door, and press and hold the button in the lower right corner with your left hand without letting go.

2. Open the key door with your right hand. 3. When the wrench symbol does not flash on the meter, release the left hand. 4. Press the button in the lower left corner, the wrench symbol disappears, and the maintenance prompt is eliminated.

The method of Volkswagen Bora to eliminate maintenance tips is as follows: 1. Close the key door, press and hold the button in the lower right corner with your left hand and do not let go. 2. Open the key door with your right hand.

3. When the wrench symbol does not flash on the meter, release the left hand. 4. Press the button in the lower left corner, the symbol of the hand of the balance liquid disappears, and the reminder of the celebration is eliminated.

1. In terms of exterior design, Bora outlines a more three-dimensional and elegant vehicle shape with strong and stretched lines, and increases the grille area, making the entire front face look more light and energetic. 2. The side shape of Bao ** Lu is dynamic and elegant. The two parallel waistlines that run through the front and rear are concise and cautious, which not only makes the body more slender, but also more powerful.

Volkswagen Bora maintenance lamp zero method: 1. First press and hold the small wrench button with your left hand, and turn on the ignition switch with your right hand; 2. Then loosen the small wrench button with your left hand to press the minute button of the time adjustment button to turn off the ignition switch; 3. Leave the time button with your left hand and turn on the ignition switch or start the engine. The Bora car is equipped with a cruise control system, EPB electronic parking brake and Autohold automatic parking function as standard on all models, as well as multi-function power seats that can provide six-way power adjustment, and the luxury model is also equipped with seat heating, air purification system and dual-zone automatic climate control system.

Percolation key. The handling performance of the Bora is very good, and it will be easier for Dansen to drive. In fact, no matter what car you choose, you must carefully compare the handling performance of the car. If you choose a car with average handling performance, it will be tiring to drive in the future.

As a relatively mature model, even after driving for a long time, Volkswagen Bora has excellent performance in handling, precision, and comfort. Volkswagen Bora's safety is also good, and it has been recognized by many consumers in several models at the same price. In addition to airbags, tire pressure monitoring and ESP body stability systems protect the driver and passengers.

And Bora also has functions such as reversing radar and hill assist.

1: Press and hold the small wrench button with your left hand, and then turn on the ignition switch with your right hand (the position before landing).

2: Release the small wrench button with your left hand and press the minute button of the time adjustment button.

3: Turn off the ignition and leave the time button with your left hand. When the ignition is switched on or the engine is started, the maintenance prompt disappears and the manual maintenance reset ends.

Maintenance lights are reset to zero.

Step (1) With the engine turned off, depress the short-range distance counter reset button under the tachometer and hold down.

2) Put the ignition switch in the ON position, let go of the short-range distance counter reset button, and the display appears"service"Sign.

3) Pull out the minute button on the clock and turn the minute button to the right, and the mileage display will appear on the display.

4) Turn off the engine and remind the message to reset.

5) Set the ignition switch to the ON position"service"The sign disappears.