What should I do if the refrigerator door is not closed tightly, and what should I do? What are the

If the refrigerator door is not closed tightly, there must be a problem with the refrigerator door, I have analyzed the following reasons for you here, you can take a look. It is generally caused by the following reasons:

First, the door seal is aging, because the refrigerator door is opened and closed very many times, which makes the refrigerator door seal almost always live in a state of stress, and if it is in such a state for a long time, the door seal is easy to age, deform, etc., so that the refrigerator door will not be closed tightly;

Second, the suction power of the refrigerator door is not large enough, and most of the refrigerators on the market now use drawer design, which solves the problem of opening and closing the door for children, but once this technology is not too hard, it is easy to cause the refrigerator door to loosen, so that the refrigerator door is difficult to close tightly;

Third, the refrigerator is not properly maintained, in fact, the refrigerator is the same as us, it must be properly maintained frequently, and if it is not properly maintained for a while, or it has never been maintained, it will make it sick, and the refrigerator door is not closed tightly;

Fourth, it is very important to clean the refrigerator correctly, for the treatment of the refrigerator, not only the inside of the refrigerator, but also the outside of the refrigerator should be cleaned frequently, otherwise once too many stains are deposited on the outside of the refrigerator, the refrigerator will not be closed tightly, and the door seal should be cleaned regularly and correctly. Do the above four points well, you can solve the problem of the refrigerator door is not closed tightly.

If the refrigerator door is not closed tightly, teach you three steps to solve it.

Hair dryer styling:

In the place where the seal is not good, take the hair dryer to blow the place with hot air, the blowing time should not be too long, the plastic door seal can be soft, suspend the blowing for about two minutes, the door seal deformation is eliminated, and the air leakage is repaired.

Method Steps:

1. Plug the hair dryer into the nuclear crack of the electric plug-in plate.

2. Open the refrigerator door and clean the door seal inside and out.

3. Turn on the hair dryer switch and gently blow up and down against the refrigerator door seal.

4. Then try to close the refrigerator door to see if the door seal is more magnetic than the original.

5. If it is a little better, then continue to blow gently up and down.

6. Close it again and try it until you are satisfied.

The problem that the refrigerator door is not closed tightly.

1. Aging of the door seal Because the refrigerator door is opened and closed very many times, this makes the refrigerator door seal almost often under the stress state, and if it is in such a state for a long time, the door seal is easy to age, deform, etc., thus making the refrigerator door congratulatory is not tight.

2. The suction power of the refrigerator door is not large enough Most of the refrigerators on the market now use a drawer design, which solves the problem of opening and closing the door for children, but once this technology is not too hard, it is easy to cause the refrigerator door to loosen, so that the refrigerator door is difficult to close tightly.

3. Improper maintenance of the refrigerator In fact, the refrigerator is the same as us, and it should be properly maintained frequently, and if it is not properly maintained for a while, or it has never been maintained, it will make it sick, and the refrigerator door is not closed tightly.

4. It is very important to clean the refrigerator correctly For the treatment of the refrigerator, not only the inside of the refrigerator can be treated, but also the outside of the refrigerator should be cleaned frequently, otherwise once too many stains are deposited on the outside of the refrigerator, the refrigerator will not be closed tightly, and the door seal should be cleaned regularly and correctly.

The door seal is aging, because the refrigerator door is opened and closed very many times, which makes the refrigerator door seal almost always live in a state of stress, and if it is in such a state for a long time, the door seal is easy to age, deform, etc., so that the refrigerator door will not be closed tightly;

It is very important to clean the refrigerator correctly, and for the treatment of the refrigerator, it is not only enough to treat the inside of the refrigerator, but also to clean the outside of the refrigerator frequently.

Otherwise, if too much stain is deposited on the outside of the refrigerator, the refrigerator will not close properly, and the door seal should be cleaned regularly and correctly.

Tips for not closing the refrigerator door tightly:

1. The door seal is deformed quickly and uses a hair dryer.

The poor sealing may be due to the deformation of the door seal, and the hot air makes the plastic door seal soft. Natural cooling for about two minutes can eliminate deformation and repair air leakage.

2. Try wiping the iron filings on the door seal.

The aging of the refrigerator door seal is the main reason for the refrigerator door to be closed tightly, due to the adsorption of iron filings or metal powder, the door seal is worn out. If the iron filings are swept away by a brush or rag, the magnetism can be restored.

The problem description is not clear.

When the refrigerator door is closed, it is normal to have a certain magnetism. If you care that there is no magnetism when the door is closed, it means that the refrigerator door seal is abnormally damaged or has lost its magnetism, and you should consider replacing the door seal or replacing the magnetic stripe inside the door seal.

If you can't handle it well, you should report to the product manufacturer for after-sales repair, and let the maintenance personnel check and deal with it.

Many friends report that after the refrigerator is used for a period of time, the door is often not closed tightly, what should I do if the refrigerator door is not closed tightly? Don't worry, I'm here to give you some advice.

The door is not tightly closed. You can use a tool to gently pry up and remove the door seal at the position where the door is not tightly closed, take some cotton, collapse the part of the door seal that is not tight, and fill in the amount of cotton, which is subject to the door just closed. Because the cotton itself is elastic, it can ensure a tight fit between the door seal and the box.

The door seal is curved in an S-shape.

If the refrigerator door seal is bent in an S-shape, you can use a ruler to press the inside of the seal, and then use a hair dryer to heat the bent part slightly, so that the plastic will be slightly softer and stop heating, and wait for the refrigerator door seal to cool down, and then remove the ruler to return the seal to its original shape. Note that when heating with a hair dryer, the temperature should not be too high, otherwise the door seal plastic will soften, which will easily lead to blistering and deformation; When heating, if you use a 700W hair dryer, the distance after the year is 3 cm, don't blow too long.

The door seal is convex.

When the door seal is in contact with the flange of the outer box so that the door is not closed tightly, the middle and lower hinges can be moved to increase the distance between the outer box and the door, and then add a gasket or cardboard piece to the middle hinge, and then re-tighten the 3 screws of the hinge.

Door seals are aging.

You can remove the refrigerator door, cut the adhesive parts of the 4 corners of the door seal with a knife, and remove the magnetic strip. Remove the lower door seal, soak the deformed seal in hot water at about 60 degrees Celsius, turn it from time to time, remove it after 7-8 minutes, and gently straighten it with your hands on a flat countertop. Once cooled, the curved door seal will be flat and straight.

If the thickness of the door seal is inconsistent, the thicker part should be pulled several times. After the door seal is straight, the length has been increased due to the reason of stretching, and the excess part should be cut off when installed on the refrigerator door, and the end should be beveled at a 45-degree angle. When installing a magnetic strip into the door seal, the side with the high suction should be facing the box and glued with 502 glue.

The 4 corners can be heated with a hacksaw blade and inserted into the corner seams, and the hacksaw blades are pulled out after the door seal seams are melted, and then loosened after pinching for a while, and the door seals will be glued firmly.

Improper maintenance of the refrigerator.

No matter how good the refrigerator is, it also needs to be maintained, otherwise it will make it sick and lead to the problem that the refrigerator door is not closed tightly. When using the refrigerator daily, it is necessary to develop good habits, try not to use too much force to open and close the door, gently push to ensure that the door can be closed, and try not to put too many heavy objects on the door, which can also prevent the door from deforming due to long-term "excessive weight".

There may be iron filings on the refrigerator door seal.

If there are iron filings or metal powder adsorbed on the magnetic door seal, there will be a situation that the refrigerator door cannot be closed, you can attach white paper to the place without iron filings, sweep the iron filings onto the paper with a brush or rag, and then lift the white paper, and the iron filings will fall.

There is a gap in the door seal.

When the first part of the door seal, due to the influence of low temperature, there may be a gap, this is easy to handle, you can use an electric hair dryer to blow on the gap position, so that it is heated. Pull out the recessed part of the rubber mat of the door seal by hand, wait for 20 minutes until the gap disappears and the seal is restored, and then continue to use.

Reasons why the refrigerator door is not closed tightly and how to fix it:

Tools: Haier refrigerator, a wet towel.

1. After defrosting the inside of the refrigerator, observe carefully, you will see that there is a seal outside the refrigerator door, whether the sealing degree of the refrigerator is good, and this seal is directly related, press the seal with your fingers to see if its elasticity is good, if you feel that the elasticity of the seal is not enough, or even has become hard, please continue to the next step.

2. Take a towel, soak the towel with hot water, and then wipe it along the refrigerator seal with a hot towel, the heat can make the seal soft, and then close the refrigerator door to see if it can be strong, if you can, it means that your refrigerator seal can continue to be used, please continue to the next step.

3. Slowly remove the refrigerator seal along the refrigerator door, and then soak the whole seal into hot water, in the hot water, the seal can become soft and restore elasticity, and when the seal is scalded and completely soft, you can take it out and continue.

4. Wipe the soaked seal dry, and then reinstall it on the refrigerator door according to the original line.

5. If the refrigerator seal has not changed after wiping with a hot towel, it is still hard, and the refrigerator door is still not tightly closed, considering that the quality of the refrigerator door seal is not good or it has been used for a long time, and the refrigerator door seal has deteriorated, you can consider replacing it with a new refrigerator door seal.