Is the wall mounted touch all in one easy to install?

It is very convenient, we used the 42-inch wall-mounted touch all-in-one machine in the lobby of our unit, and the installation is to fix the wall bracket on the wall, and then hang the touch all-in-one machine on it to stabilize it and use it.

It's very convenient, a few empty seals, and you can go on top.

1. Select the system you want to install.

<>4. After entering the PE system, open the white tool, select the installed system, and restart it after the installation is completed.

<>5. Finally, restart the computer and enter the desktop, the system installation is completed, and you can start using it.

Reinstallation preparations 1, a computer can be used, a U disk 2, the system**: win7 64-bit system** G and above U disk 2, reinstall the system 1, make a good U disk boot disk on the available computer, and copy the computer system ISO file directly to the Gho directory of the U disk; All-in-one system computer**1 2, insert the USB flash drive boot disk ,.. on the all-in-one computer that can't be turned on

There are two ways to reinstall the system.

If you understand the method of installing the operating system on the system disk, then you can use the PE system disk or the pure version of the system disk to start the computer and install the system on the hard disk.

If it is a white, will not install the system, as long as the computer can still start, can be connected to the Internet normally, you can use the first installation tool on the Internet, directly replace the system, the operation is very simple, suitable for Xiaobai.

First of all, store the original win7 system image file in the directory of the U disk startup disk Connect the U depth U disk startup disk to the computer, restart the computer and wait for the boot screen to appear, press the startup shortcut key, use the U disk startup disk to enter the U depth main menu, select the u depth win8pe standard version (new machine), press the enter key to enter.

1. A computer can be used, a U disk 2, the system**: win7 64-bit system** G and above U disk 2, reinstall the system 1, make a good U disk startup disk on the available computer, and copy the computer system ISO file of ** directly to the Gho directory of the U disk; All-in-one machine installed system power.

The specific steps are as follows:

1. Installation method under the hard disk: (applicable to MBR partition).

Call the system installer to select the GHO system image to install the system. Compare the current gho image file with the"Hard drive installer. exe"Tool.

Copy the data to the root directory of the D drive (non-installation disks) and run the program"Hard drive installer. exe ", click"OK"Enter the system automatically.

Start the installation process until it is complete.

2. Installation method under PE:

Use a CD-ROM or USB flash drive to boot into the PE system, run the installer and call the GHO WIM system image to install the system.

If you don't have a USB flash drive around you, you can directly buy a PE boot USB flash drive and buy it

Easy steps for USB flash storage system:

2) Go to BIOS and set the first boot item to USB flash drive (hotkey boot is recommended).

3) Reboot the PE system into the USB flash drive.

4) Run the installation tool in PE to restore the installed system.

If the touchscreen calibration program is missing, or if the touchscreen information query software on the machine is missing, contact the customer to request it.

We also helped an educational institution reinstall a few days ago, and the general touch screen all-in-one machine has a one-key recovery, after you turn on the phone and press and hold F10 and other options appear, you can choose one-click recovery or something like that.

1. Choose a good Windows operating system.

2. Prepare USB flash drive and other tools.

3. Set up the touch screen all-in-one machine.

Fourth, directly reinstall the operating system.

I don't know what kind of system the touch screen all-in-one is.

If it's win10 itself, it has a recovery function.

Search System Reset.

Of course, it is true that you need to reinstall the system, you can also install it on a USB stick, which is very simple.

I don't know what kind of system you have.

If it's win10 itself, it has a recovery function.

Search System Reset.

Of course, it is true that you need to reinstall the system, which can also be installed on a USB flash drive.

How to re-operate this touch screen operation of the wall-mounted touch screen all-in-one machine, you can directly restart it through him, or start it through his one-button.

1. Preparation for reloading.

1. One computer and one USB flash drive can be used.

G and above USB flash drive.

Second, the reinstallation system.

All-in-one system computer**1

2. Insert the USB flash drive boot disk into the all-in-one computer that can't be turned on, and keep pressing the shortcut keys such as F12 or F11 or ESC to open the boot menu after restarting, and select the U disk option to enter, such as General Udisk, the computer that does not support these boot keys to check the second point to set the USB flash drive boot method, if the BIOS can't enter, it is a hardware problem;

All-in-one U-disk mounted system computer**2

3. Start from the U disk to enter the main menu of the U disk PE, select the option enter through the arrow keys to start the PE system, if you can't enter the PE, then select the old PE system;

All-in-one computer**3

4. Enter the PE system, users who do not need partitions directly execute step 6, if you need to repartition, you need to back up all the data, then double-click to open the [DG partition tool], right-click the hard disk, and select [Quick Partition];

All-in-one system computer**4

5. Set the number of partitions and the size of the partition, generally C disk is recommended to be more than 35G, if it is a solid state drive, check "Align Partition" to 4K alignment, click OK, and execute the hard disk partitioning process;

All-in-one U disk mounted system computer**5

6. After the partition is completed, open [Xiaobai PE One-click Installation], select the ISO image of the computer system in the image path, and the tool will automatically extract the GHO file, click the drop-down box to select the GHO file;

All-in-one computer**6

7. Then click "Restore Partition", select the location of the system disk, generally C disk, if it is not displayed C disk, you can select according to the "volume label" and disk size, click OK;

All-in-one system computer**7

8. This prompt box pops up, check "Restart after completion" and "Boot repair", and click Yes to start the system reinstallation;

9. Go to this interface and perform the operation of system restoration to C drive, this process takes about 5 minutes;

All-in-one U disk mounted system computer**8

10. After the operation is completed, the computer will automatically restart, at this time, pull out the USB flash drive, restart to enter this interface, and continue the system reinstallation and system configuration and activation process;

All-in-one system computer**9

11. The whole reinstallation process takes 5-10 minutes, and after the system is reinstalled, the all-in-one computer can be turned on normally.

All-in-one U disk mounted system computer**10

1. First of all, make the USB flash drive into a boot disk, restart the computer and wait for the boot screen to appear, press the startup shortcut key, enter the main menu, select the option of "Run Win8PE Installed Version", and press the Enter key to confirm.

2. Enter the Win8PE system, the installation tool will pop up by itself, click "Browse" to select the Win7 image file in the U disk.

3. Wait for the win7 system image package installation file to be loaded, just select the installation disk location, and then click the "OK" button.

4. At this time, click the "OK" button directly in the pop-up prompt window.

5. Then the installation tool starts to work, please wait patiently for a few minutes.

6. After completion, a prompt will pop up to restart the computer, click the "Yes (Y)" button.

7. At this time, you can unplug the U disk, restart the system to start the installation, no need to operate, wait for the installation to be completed, and finally restart it before entering the system desktop.

It's best to find a mouse to prevent situations where there is no touch driver.

System reinstallation can be divided into ghost reinstallation, Microsoft system disc reinstallation, and software reinstallation, among which ghost reinstallation is the most convenient and simple, and is the most common method of reinstalling the system.

ghost reloaded.

Ghost reinstallation is the easiest and most convenient way to reinstall the system, almost all computer stores and repair shops and unofficial system discs are based on ghost reinstallation, ghost reinstallation has the advantages of easy operation, fast reinstallation speed, and simple method.

The ghost reinstall system is a gho image of the operating system from the Internet, and then use the ghost tool (generally use onekey ghost) to reinstall. These mirror system files are generally more than 600M, Win7 is generally about 3-4G, and Win8 is generally about 3-4G.

Reboot and reinstall. This is the most convenient way to reinstall the system, just restart the computer, no USB flash drive or install software, press and hold a button, you can reinstall the system. The specific steps are as follows:

Restart the computer, hold down shift when restarting, and when the prompt to reinstall the system pops up, you can put it in your hand, and you can operate it according to your needs (save the file and not save the file, the wrong point cannot be modified, please choose carefully).

USB flash drive reloaded. U disk system is currently a more convenient way to reinstall the system, only need to **U disk startup disk maker to make U disk startup disk, and then set up U disk startup when entering the system, the production tool can be online**.

Use the UltraISO file to write the system ISO to a USB flash drive.

On the BIOS interface, adjust the USB flash drive to the first boot item (you can also use the computer USB flash drive to boot the hotkey).

Insert the USB flash drive and restart the computer, it will automatically enter the installation interface of the installer, and follow the prompts to install.

Disc reload. The most common method of using the disc reload system is to directly use the disc to initiate the reinstallation option. First of all, we can set the CD-ROM boot in BIOS, or press the relevant shortcut key to enter the boot menu and select CD-ROM boot.

Hard disk installation. From the Internet**iso (Microsoft original version is recommended), then unzip to a non-system disk, and then run the program in it, select Advanced during installation, and select the drive letter. The rest of the work is fully automated, unattended.

If a genuine image is installed on a hard disk, the original system disk will not be formatted, but the original files will be moved to it""folder, but you can't go back to the original operating system (the original system does not integrate the driver, you need to back up the driver in advance, or ** driver installation software (such as driver wizard, 360 driver master) network card version. ）