-
It should be that the hard drive is about to break.
-
System ghost restore. This will happen. You should just need to reformat it. Give it a try.
-
Disassemble the hardware and reinstall it again.
-
Check the hard drive jumper and then restore the BIOS settings.
-
It's supposed to be a virus.,BIOS settings you haven't touched.,STAT has a floppy disk that clears the hard disk.,But that seems to be encrypted.,Can't copy it.,I seem to have one a year ago.,Now it's gone.。 Why don't you try low? Only the beginning of the grid, the grid will be terminated in 5 minutes and then the system will be tried again, if it can't be passed, the hard disk is broken, take it to repair the hard disk and repair it.
-
See if the memory is not plugged in properly, and if it doesn't work, change the memory.
-
Have you changed anything recently, such as drivers, or installed any software?
1. Restart the computer, press F8, and the selection menu will appear.
2. Select the last correct configuration, try the security mode, and if you can enter the security mode, you can uninstall the recently installed software or driver.
3. If you can enter safe mode, you can fix the blue screen through PC Manager.
1. Click to open the computer manager computer clinic.
Fourth, if this is still the case, you can only redo the system.
-
No boot device, you have to set the hard disk boot, cdrom boot or U disk boot, the general computer boots up the default hard disk boot, because the system is in the hard disk, the reason for this problem may be the hard disk is broken (hardware problems have to find someone to repair or replace the new one), the system is broken (the system boot file is lost or poisoned, etc.).
-
It says there's a problem with the interface of your hard drive, so I'm telling you to check it
Reseat the two cables of the hard drive connector
-
Literally can't find the boot disk.
Boot up and press del to enter the BIOS to see if the hard disk can recognize it. If not, move to the computer city to solve the problem.
-
Check to see if there's anything like a USB stick on your computer, unplug it, and press any key. This prompt is that the disk was not found.
-
The network cannot be started.
Enter CMOS and set the first boot disk as a hard disk.
-
For example, if the hard drive was not found, it says that no bootable device was found.
-
There is no operating system, so you can reinstall the system. See if it's a hard drive issue.
-
Boot problem, modify the default first boot hardware, and go to BIOSS to modify.
-
This prompt is caused by too many temporary files in the system, or a disk problem, take a look at the following methods.
1) This prompt appears in the lower right corner of the taskbar (a file is damaged, please run to use the chkdsk tool to repair), it is generally caused by too many junk files in the system, mainly the junk files generated by the Internet, just clean it up.
Open a web page, click on the "Tools" menu on Internet Options under the "General" tab and click on "Delete cookies(i)", delete files in the "Delete Files" pop-up, click on "OK" (including offline files), and restart your computer (no need to use the chkdsk tool that prompts).
2) The system comes with the disk repair method: (If the fault is still there, that is, there is a problem with your disk, please repair the disk, repair each disk, or only repair the C disk).
The specific steps are as follows: select the drive letter in my computer, right-click to select the properties, select "Tools Start Checking" in the pop-up drive properties window, and select "Automatically repair file system errors" and "Scan and recover bad sectors", and then click Start, the scanning time will vary depending on the disk capacity and scanning options (after doing it according to the above method, a box will pop up, the point is, repair after automatic shutdown at boot, win7 select the disk check button according to the plan).
3) If it still doesn't work, it may be that there is a problem with the hard disk, try to repair it with software. Bad sectors on the hard drive will lead to corruption or loss of computer system files, computer failure to boot or freeze. Hard disk bad sectors can be repaired using NDD Disk Utility or Scandisk.
4) If the fault persists, please restore the system or reinstall it (it is still not possible to format the hard disk and repartition and reinstall it, if it doesn't work, you will have to replace the hard disk, or overhaul it).
-
Start - Execute - Enter cmd - Open the DOS window and enter chkdsk c: f r
Then you will be asked to restart the computer, do not press any keys after restarting, and wait for Windows to run the chkdsk program!
-
If there is a problem that you can't solve by yourself, you can decisively find after-sales service.
-
You can just click OK, sometimes my computer is like that, as long as everything else can be used normally, just ignore him.
-
This should be when you clean up the garbage, or clean up the boot start, when the phone is turned on or off, right? Leave him alone.
-
QQ in addition to the problem! Terminate the program and reinstall QQ. Use the boot function of 360 software to prohibit all programs related to QQ!
Find one that is similar to your machine (just assemble it). >>>More
In a word, match according to demand.
So you only need E5300, no more than 800 memory, 1333, and then choose a motherboard that supports DDR3 and integrates graphics. >>>More
A big reason is that the weather is humid, recently it is a southerly day, today my company's machine has n monitors have problems, and finally turn on the air conditioner to dehumidify, and then use a hair dryer to blow behind the monitor, to see the humidity, blow for about 10 minutes OK!
Of course, it will be smoother, and it is recommended to add one more memory. >>>More
This problem is very hard to say,Some BIOS can't initialize the hard disk information and don't display,You can take the hard disk down,And take down the memory to boot it up,And then install it,If the optical drive can't be opened,I think it's the strong current that hasn't been added.,You can take a look at the strong current port.,There's also a possibility that your graphics card is broken.,But if your memory is broken.,And there's an integrated graphics card.,There won't be a display.,What I can judge now is these problems., By the way, do you have a problem with the power supply? The last question is whether the power supply on your motherboard has been added? If you add it, you can consider the above problems, I have encountered a single problem in the company, and the combination is not necessarily the original reason, I hope mine can help you,