How do I close the installer on my computer and keep it from being messed up with things?

Wouldn't it be better to install it if you don't have permission?!

If you want to close the installation service, you won't be able to install any programs you want to install. The system should be automatically updated for you.,It's good for the system.,If it's installed with other messy software,,It's definitely because you're poisoned or when you install the software yourself, the plug-in software that comes with it is also installed.,That's your problem If you really want to turn it off,You can do the following steps:

1.Enable guest users Let friends log in to your PC as guest users The downside is that some large programs are not available to guest users and do not have access to the Internet

2.Create a normal user Enter net user akingroc add in the start of the run, where akingroc is the created user name, of course, you can change it to something else, and then let someone else log in to your computer with this new user, so that he can't install files and delete your files.

3.Install the restoration software It is recommended to install Shadow Guard The feature is that it is small and convenient After installation, set all drive letters to be monitored, so that no matter how the file or system changes, even if it is deleted, it will be intact after restarting

You can set up a user on your computer or set up a guest user.

This question can be avoided,You pay attention to the repentance when you install the software,The installer will check a lot of Li Min software,You have to remove all the hooks。 Sometimes the option is hidden, click on the custom installation.

There is more than one Zheng Ze plan to solve this problem, I think the plan I think of Zhao Congyuan can not accurately solve your problem, and the detailed answer to the clan collapse case still needs you to think about it yourself.

Uninstall all non-essential software (including 360, Tencent Butler, who likes to shout Tong with the whole family bucket). My computer information will install a velvet security, and the other is the Zheng Tantan software of daily time.

Method. 1. Run gpeditmsc to open Group Policy, open the windows component in the management template, there is a windows installation service, you will take a look at the things on the right, the specific method: run gpeditmsc - > computer configuration - > management template - > windows components - >ms installer - > start" to disable ms installer"and "Disable user installation".

In the window on the right side of Windows Installer, double-click Disable Windows Installer, select Enabled, and click OK.

Enable in the policy: Disable "Add and remove programs", and then enable the following policies: "Run only licensed Windows applications" in "Console - User Configuration - Management Templates - System", and in the "Allowed Applications List" "Add Allowed Applications and Let You Run Programs Limit and Restrict."

You can make restrictions in Group Policy, but as long as the user can enter Group Policy, then he can still install files, and after the method of setting is entered into Group Policy, enter the user rights settings to find the installation file item and delete all user names.

Method. 2. On my computer--- right-click on the management fan--- open the services and services in the application--- find Windows Installer on the right--- double-click to open, and change the startup type to Disabled.

This makes most installers uninstallable, as it will ban all installers that require a call to Windows Installer, especially those that *msi will definitely not install.

Method. 3. In the user account in the control panel, create an account, do not give installation permissions, and when you want to install, you can right-click and choose to run the installer with the administrator account, and some programs that want to modify system files are also run in this way.

Enter the administrator account

Computer Configuration - Windows Settings - Security Settings - User Rights Assignment has the load and uninstall program trust under the trust.

Method. 4. Set user permissions.

Encrypt the administrator's username Create a new user in the user group and let them use this to log in, and the installation directory will not be available.

Enable multi-user login, set permissions for each user, and preferably only those with administrator privileges can install the program.

Also, if you want to convert the disk format to NTFS format if the 2000, XP, or 2003 system is missing, then set the user, and set the permissions for each user.

When the boot logo appears, you can continuously click ESC to select the startup item (the product line is different, the entry shortcut key of the startup item is different, ASUS notebook is pressed ESC, desktop or motherboard is pressed F8).

Windows 10, like Windows 8, supports UEFI or non-UEFI boot (Windows 7 does not support UEFI boot).

For this installation of Windows 10, we recommend choosing UEFI mode boot, so that the subsequent partition format is a more advanced GPT format, if you choose non-UEFI mode boot (the fourth item in the figure below), the subsequent partition format is MBR, and up to 4 primary partitions will be created.

Install the system. After selecting Start USB flash drive in the startup item, the boot image begins.

Once you've selected settings such as language, keyboard, etc., select Next

Click "Install Now".

The installer is starting.

In the stage of verifying the key, you can enter the key directly, or you can choose to skip it temporarily.

Agree to the license terms.

Select Custom

Next, partition, [Windows 7 needs to click "Drive Options (Advanced)"].

Click New to allocate the size of the C disk, here 1GB=1024M, and allocate the size according to your needs.

If you need to allocate 100GB for the C drive, then it is 100 1024=102400, and in order to prevent it from becoming, you can add 5-10MB more

Here we divide the 127GB hard disk into a partition, click New and click Apply.

Windows will automatically create a boot partition, select OK here.

After the C disk is created, the system reserved disk is automatically generated, so you don't have to worry about it. This partition will be automatically hidden after the system is done, then select the path of system C installation, and click Next.

If you have a lot of areas, don't choose the wrong installation path.

Files are being copied and prepared, and most of the next stages are automated.

The following diagram shows that all the steps are done automatically, and then they will be automatically restarted.

Windows will restart automatically, and the USB flash drive can be unplugged at this time.

Windows still loads the process automatically after restarting. During this period, it will be restarted several times, and the setup is being prepared.

When it is ready, it will restart, and it is time to verify the product key, and you can enter it directly if you have a key, or you can temporarily choose to talk about it later.

Quick to get started interface, choose to use Quick Settings.

Wait a moment. At this point, the system is almost installed, create an account and password for this computer, and leave the password blank means that you have not set a password.

Next, Windows this settings app.

Wait for the final configuration to be prepared.

Windows is installed, so please enjoy it.

Automatically jump to the desktop.

Note: Please be aware that reinstalling the system will result in data loss on the hard drive.

(2) Set the CD to start: After booting, when the motherboard self-test screen or brand logo screen appears, quickly and continuously press the BIOS hotkey (different brands and models of computers have different BIOS hotkeys, notebooks are generally F2 keys, desktops are generally DEL keys) to enter the BIOS setting interface. Press the left and right arrow keys to move and press enter to enter the boot (or startups) tab, select the boot option by pressing the up and down arrow keys, and press the + or - keys to move the boot option to set the optical drive (cd-rom or ***-rom) as the first boot item (the old motherboard needs to enter the advanced BIOS features tab, press enter at "1st boot device", and then select cd ***-rom), Press F10 again to save and exit the reboot.

Some new motherboards support pressing F12 or F11 to enter the boot options menu after booting, and you can directly select the optical drive without entering the CMOS interface. Insert the system disc into the optical drive in time when you restart the computer. After the system is reinstalled, pay attention to setting the hard disk as the first or second boot item.

3) Clone and install the system: After the disc is successfully started, the function menu will be displayed, at this time, select "Install the system to the first partition of the hard disk" in the menu, press enter to confirm and follow the prompts, or after entering the PE system, run the "one-click installation system" on the desktop, the computer will automatically run the GHOST software to automatically load the GHO file and clone and install it to the C area, the whole process basically does not require manual intervention, until the last entry into the system desktop.

When the driver of the hardware is installed incorrectly or the driver of the hardware itself is buggy, it will also cause a crash, so you need to check whether the driver of the installed hardware matches the model of the hardware or the model of the core chip [love you] [love you].

1. Tools: win7 system.

2. Steps:

1.Right-click "Computer" on the desktop and click on the "Manage" menu bar.

2.In Computer Management, select Use the Services item in Services and Applications.

3.Find the "Windows Installer" item in the program on the right side of the interface.

4.Click on the "Windows Installer" item, we right-click on the pop-up menu and select the "Properties" function.

5.See that its properties are started by default, and then see the description of the service: Add, Modify, and Remove as Windows Installer (*

MSI) package. If this service is disabled, any service that relies solely on it will not be started.

6.Open its property settings, click on "Startup Type", select "Disable" in it, and OK, so that the software installation service is disabled.

In Windows 7, you can do this by following these steps:

2. Click Manage Templates, click to open Windows Components, select Windows Installer, and double-click Disable MS Installer"：

3. In Disable Windows Installer, select Activated, click Only for unmanaged applications, select Always Disable, and click OK.

On a computer, you are not allowed to install programs, and here's how to do it.

Method 1: Service Prohibition

1) Start - > run - > enter the command - > enter.

2) Find the Windows Installer item and double-click on it.

3) Once you are in the new window, under "General", set the startup type to "Disabled".

4) Then press "Apply" vs. "OK" and you won't be able to install the program.

Method 2: Group Policy prohibitions.

1) Start - > run - > enter the command - > enter.

2) In the Group Policy window, open Computer Configuration - > Administrative Templates - > Windows Components - > Windows Installer.

3) On the right window, find and double-click on "Disable Windows Installer".

4) In the new window, set to "Enabled", then select "Always" in the box below, 5) Press "Apply" and "OK", the app installation is blocked.

You can add a guest user on the computer, and after logging in with this user account, you can't modify the registry and install the software.