ThinkPad recovery disk problem, see the specific supplement

Regarding what you said that a machine can only engrave a set of disks, this is a bug in Lenovo TVT software, in fact, you can write a file to achieve the function of continuing to engrave disks. But I didn't write down how this file was written. If you want to engrave a second set of disks after carving a set, you can restore it with one click first, and then continue to engrave it.

The disc of the service station is a little different from the disc engraved by yourself, that is, when you put the second disc engraved by yourself, you need to click no, and then click yes, and the disc of the service station is the same as the original factory of the disc of our after-sales service, and you can press yes directly. You can restore your system with your classmates' discs. And it is also a genuine system after restoration.

However, some drivers may be incompatible, and you need to uninstall them and install them yourself. The drive can be reached. I don't know if I'm detailed enough, if there's anything unclear about it, please add it, I'll continue.

Regarding the number of recovery discs, generally speaking, it is 1 CD, and if it is ***, one or two is uncertain, that is, 1 CD, 1*** may also be normal. As for the listings sold online, I'm not sure about their **. Also, the so-called original disk, unless it is brought randomly (this is difficult to get), is engraved by yourself.

Including the disk of the service station, it is engraved by itself after it is taken down from our after-sales server. And the verification you mentioned, I really don't know much, but the same model will definitely work after restoration. You can rest assured.

Yes,,It's just that the id you said is not what my computer - in the attributes,There's a label on the back of your book,It's a set of serial numbers,That's the random system number of your computer,If you install the serial number is incorrect, you can enter this serial number,Your friend's recovery disc can be used on your machine,There will be no problems,As for the graphics card driver, you need to install it yourself.。

It is IBM ThinkPad after 2005 IBM in order to increase the simplicity and practicality of the laptop, and the original system real-time update, system one-click recovery, system backup, system driver installation and update in one of the notebook update system, opened the ThinkPad epoch-making arrival, thinkpad portable notebook added to the chip to identify whether it is a thinkpad notebook.

Since the systems used are all Microsoft's, the notebooks purchased are all genuine systems.

ThinkPad recovery disk is differentiated according to different models, different series, different notebook models, recovery data is not the same, IBM for ThinkPad after-sales service set up the Blue Express, now called ThinkCentre, to provide IBM notebook all after-sales service.

Work,Friends banquetBut with thinkpad recovery disk,The restored system will be all formatted,That is, all the partitions divided,Will be classified into a whole area,The recovery disk will be separated from the recovery data internally into an area,That is, the hidden area that everyone says。

The recovery disk will restore the laptop to its factory state, which means that you bought the computer back to look like it, and then you bought the computer back as it is.

After restoring, it will be completely restored to the factory state, even the hidden partition will be restored to you, and you can back up the system by yourself after the restoration, and you can do it next time.

I used a one-click restore.

When you have an ISO file of ThinkPad system data, you can make your own system recovery disk, or you can also back up the system in your own computer, and it is better to restore it directly after using it later.

1. First of all, you have to figure out one thing, what does the so-called recovery mean? The definition of one-click recovery refers to restoring factory settings, that is, the system given to you at the time of delivery, which is innocent. This is also known as the original and genuine system.

2. Because it is the original genuine system, this system is placed in the Q partition in the hidden partition, which is an untouchable partition, so that you can return to the original system at any time.

3. Because you can't touch it, so when you install the driver, install the common software and your own software, your system can still be backed up, and the backup at this time is actually to make the system into an image file, and then keep it. This retention can be burned into an optical drive or, of course, can also be retained in hard disk storage.

Now start your question:

1. The recovery is the system.

It is the key of one-click recovery, which you can find on the manual. When the system is turned off, it will automatically power on and restore the system.

Restore is to ghost the backup system to C drive, all data in C drive will be erased, but there will be no change outside C drive.

The disc is restored from the image file in the backup disc. The hard disk is the backup in the Q partition. The Q partition must be a clean and original system. But the disc allows you to back up your system at any time and contains all the software you have installed.

If it is Q partition recovery, it is clean, if it is CD-ROM, it is to keep all the data in the backup system. Of course, the scattered files, registration information forms, etc., will be restored to the time when you backed them up.

There is a repetition of this and it is already.

The disc is used to ensure that the original factory is clean and free of contaminants.

The so-called backup refers to the system, and the so-called recovery also refers to the system. As for your important data software, etc., theoretically it will not be destroyed, but the important data can be backed up by yourself with a portable hard drive. These data can be backed up directly by copying, but the system is not a copy that can be backed up, those are two concepts, this is the purpose of ghost, the backup is the image file, used to restore the system.

I don't know if you can understand this explanation?

Usually a set of recovery disks is composed of an instruction manual, a boot disk, and one or several data special application software disks (in the early days, due to the use of CD as the storage medium, there will be about six data disks). For example, the T400S 58Y4300 XP recovery disk includes a 71Y6867 manual, a 57Y9781 boot disk, a 58Y4906 disk, and a 58Y4886 data disk.

3. This article is mainly based on x220.

1. Insert the attached recovery disk into the optical drive, and quickly press the "F12" key on the keyboard when the "Thinkpad" screen appears, and set the optical drive to the first start, and then the following screen will appear.

2. After waiting for a while, the recovery screen appears.

2. Then click Next.

3. Select the recovery method, restore the C drive, the data of other drive letters will be retained, but the C drive will be formatted, the previous system data will be emptied, and the entire hard drive will be formatted if you choose to restore the factory contents. When you're done, click Next.

4. Click Next to start the recovery process.

5. Insert the second disc, note that if it is a 3*** recovery disc (the first disc boots), then the data of the first disc has been copied. It takes 10 minutes to start copying the data of recovery disk 2.

6. After the data recovery of this disk is completed, take out this disk and insert the last one.

7. Wait a little longer. Until the following screen appears, the recovery is complete.

8. Start the system after recovery. The splash screen is in English, but after that it's in Chinese.

Note: 2*** The recovery disc will enter the automatic installation after restarting, which will take about 2 hours. The 1cd+2*** recovery disk mentioned in this article is different, and you can use the computer after a few minutes after startup.

2*** The recovery disk method is as above, and the automatic installation screen is as follows:

Continuing back to the article, after that, the screen of getting the computer back for the first time appeared.

When the following screen appears, the restoration has been completed, but some simple settings are required.

Click Next.

Give your account a nice name and click Next.

Set a password for the account, if it is a home computer, you can not set it up, click Next.

Agree to the terms, both of which must be agreed, otherwise you will not be able to use the computer, tick the box below the two terms, and then click Next.

Select the first item.

Set the time zone, set it according to the actual situation, and click Next after setting.

Set up a wireless network, skip if you don't have it, and connect if you have it.

After a few minutes, enter Lenovo Welcome.

This Ann does not install as you like.

Click Continue. Go to Lenovo to register, you can skip it.

At this point, the recovery is complete.

Dear Lenovo users, hello!

Refer to the manual. Or go to the right rail, and there's a computer setup option at the bottom. Select Recovery System. to recover.