MY DELL D630 MASTER HELPED ME ADVISE ON WHETHER TO ADD MEMORY

If you are using XP system, the overall performance of the system with memory will not be greatly improved. Because even if 128M memory is allocated as video memory, the remaining memory will not be stuck for XP to play most games (like 3C).

If you are using Vista, it is necessary to add it.

If you add memory, you don't have to keep the original memory, you can replace two with a single 1GB one.

Also, as far as I know, the motherboard of the Sony Viao SZ12 is the size of the palm of your hand and is highly integrated. This is one of the reasons why it's fast. And he seems to be using Samsung's memory.

In addition, I heard that the laptop plus memory seems to have to keep a piece of original memory? Isn't that just the end of the addition? I want to upgrade the two 512 to 2 1g, is it feasible? Can it dramatically improve system performance? "

Let's remove all two, now the two 1G memory is only about 400 yuan, which is about the same as cabbage, and there is no need to keep one original memory. My machine just removed one original memory and replaced it with two Kingston 1Gs.

In addition, dynamic memory has no practical significance, if you want to change it, you can change it on the BIOS, and the video memory of 128 is enough if you don't play any giant games.

It's best to buy the memory.,Don't buy it online.,I've suffered a loss.,The strips I bought on the Internet.,The picture is cheap.,The result is that you can't use it back.,Return.,Effort.。

2*1GB RAM is recommended, but it will waste your original memory.

The specific operation steps for installing a memory module on a DELLD630 notebook are as follows:

2. Take out the prepared cross-mouth screwdriver, unscrew the screws of the small cover plate, as long as the screws of the small cover plate are fine, pay attention not to rotate too hard to avoid damaging the motherboard. As shown in Fig.

3. Remove the screws and find that the cover plate cannot be lifted, so a flat-mouth screwdriver is used, insert the gap slightly upward, and the cover plate is connected by buckles, do not use too much force to hurt the plastic shell. As shown in Fig.

4. After opening, you can see the card slot of the memory module, and the card slot of the proprietary hard disk, now start to disassemble the memory module, there are two card slots on both sides of the memory module, and at the same time dial it out, the memory module will trip, and it will be in an oblique state. As shown in Fig.

5. In this way, as long as you use a little force, you can smoothly pull out the memory module, and then replace it with the additional memory. As shown in Fig.

Dell D630 Memory Module Loading Method:

1. Dell D630 has two memory sockets, one is in the middle of the back of the machine, and there is a screw to fix it, this one is easier to install, you can see it when you unscrew the screw.

2. The other socket is more troublesome, you need to disassemble the keyboard, there is a small gap in the upper right corner of the keyboard, gently pry it up with a screwdriver, and then open the strip-shaped plastic plate at the connection between the keyboard and the screen (pay attention to put the screen flat when taking it, parallel to the keyboard), and then you can see the two screws that fix the keyboard, unscrew the screws (be careful not to damage the line connecting the screen), and then you can see the second memory socket.

There is a slot in the back.

There is a slot under the keyboard!!

1. Dell D630 memory removal can be divided into the following steps:

Turn your computer over and remove the battery.

Put your hand on the wall and let go of the static electricity in your body.

Turn on the screen and find the computer power button, that is, there is a silver-white one above the keyboard, and there is a small gap on the far right, and I knock it open with a slotted wire knife and take it down.

Find the location of the four screws and unscrew them.

After that, turn the keyboard over and you will see the memory!

2. Dell D630Dell Latitude series is a high-end sub-brand of business, and Latitude D630 is a 14-inch mainstream notebook, using a high-performance dual-core processor professional graphics card, aluminum magnesium alloy shell, with security and balance. It belongs to the mid-range mainstream class. The Dell Latitude D630 is currently discontinued.

Dell D630 memory modules are upgraded, you can buy memory modules online and add them yourself.

1.Start by preparing your tools, including a screwdriver and memory.

2.There will be a mark on the back of the notebook with a memory compartment, of course, different models and different brands of notebooks will be different. But it's all pretty much the same. Be careful not to make a mistake, and if you are unsure, it is best to check the manual or consult a professional.

3.After opening the lid of the memory compartment, adjust the position of the notched part of the gold finger of the gold bar to align it with the fixed protrusion of the slot, which is actually a foolproof design in industrial design.

4.Then insert the slot at an angle of about 45 degrees, and with a light tap, it will make a "pop" sound and snap into the slot. If you don't hear a sound, it's probably not installed properly and needs to be reinstalled.

5.After the installation is completed, close the back cover, and then tighten the screws with a screwdriver.

Note: Pay attention to the frequency and voltage of the new memory module that are consistent with the original memory module.

I use a D630 CPUT7500 integrated graphics card with a Samsung DDR2 533 2G memory installed by myself A Kingston DDR2 667 512M is now in normal use, I hope to provide you with some references.

The flat rate is the same, and 2 single strips are OK.