Ask someone to see if there is a bottleneck in my computer configuration!

Is the monitor AOC? Are you sure it's 24? 24's is not cheap.

The CPU is estimated to be 4600 The motherboard is a C61 chipset, and the motherboard and CPU and graphics card are not very good.

The chassis power supply is definitely expensive.

Only the memory and the hard disk are a little bit more realistic.

I think it, since it's costly, let's do a good job, even if the configuration is a little lower, don't engage in miscellaneous brands, it's too miscellaneous, the quality can't be guaranteed, there are often problems, you have to find someone, how troublesome.

If you are sure that the screen is 24 inches, people haven't earned you too much...

Elite motherboards are not recommended to be used before*** Now there are many parallel imports. ASUS is expensive.

The hard disk Western Digital is not good, I like Seagate Barracuda's, if you don't play games, or the game requirements are general, the CPU is still Pentium, it's good, the optical drive, mine is Samsung, it is said to be better, rarely used, and the difference is not big. Display: Personally like ViewSonic or Samsung graphics cards:

Mine is 7 rainbows.

The graphics card 9400GT is chicken ribs, the 600 yuan was spent in vain, you should buy GTX250 or 9800GT, about 800 yuan, it's a pity, but it's still okay for you to run the game with this configuration.

The graphics card is the bottleneck, let's change it to a 9800gt.

The graphics card is a little junk.

Whatever ordinary electric ones say, they are all 9600gt

Slightly pursued with a point 9800

Landlord, your configuration is relatively balanced, and it is still a relatively new machine.

There is not much need to upgrade, upgrading a certain component, it is a cut higher, and the others are relatively low, and it is not cost-effective to upgrade multiple accessories! Upgrading is to spend the least amount of money and get the maximum performance improvement according to your needs!

You're hitting a bottleneck in the game, and the right thing to upgrade is to get a more powerful discrete graphics card! Other configurations can remain the same. Your power supply is enough to support a more powerful graphics card!

It's just that it's upgraded like this, and it's really a little wasteful, and the 5770 graphics card, when sold in 2 hands, it's a pity.

Sapphire HD6850 TOXIC 1360

Such a graphics card, used in your configuration, the graphics card is superior.

It's also a good reference to change a little lower:

Onda GTX460 768MB GD5 960

In general, you don't recommend upgrading this configuration, if the game can cope with the lower requirements, you can deal with it first, or, sell your whole set to someone in need, and reinstall a better game console!

You can also play this set of games now It's almost the same It's just that the board is a small board and it's a little worse What do you want to upgrade? Change to GA 870A-UD3 CPU to X4 955

Is it possible to upgrade the memory to use dual-channel CPU if you want to improve 640 and 955 motherboard can consider (gigabyte) GA-880GM-UD2H motherboard It looks pretty good Nothing else remains the same That's what it means In fact, your host performance is not bad!

It's okay.,If you want to break through the bottleneck, you have to change the graphics card.,Stand-alone games are more likely to eat graphics cards and change to a high-end card.。

Your graphics card is a game card, and the video memory is small, the model is also old, mine is also 560ti 2g, some large games and programs, the video memory obviously feels insufficient.

You want professional drawing,CAD2010 does not support quad-core optimization,And your CPU compatibility is not good,E3The effect is not much stronger than i3,Your CPU low frequency is the first bottleneck,If you can change i5 2550k, even if it is a small overclocking,The speed can be significantly improved。

Second, is your CAD installed in a solid-state partition? There is still a need to do**, which must also be stored in a solid-state partition, otherwise it will still cause bottlenecks and obvious lag when reading.

Third, how is your virtual memory set up? If the virtual memory setting is large, the old version of CAD will use the virtual memory first, resulting in the hard disk you use to read, it is recommended to turn off the virtual memory directly, or set 16 128M, just put it on the system disk.

Fourth, it is recommended to replace the graphics card with a professional graphics card, or a card with high frequency and high video memory, and the effect will be significantly improved.

The value of professional graphics cards is reflected in this, if it is used to play the machine, there is no difference, professional graphics cards are production tools.

Gaming graphics cards are entertainment tools.

Not the same.

The graphics card is a little lower, it is recommended to buy a graphics card above the GTX760 level.

The whole CAD optimization professional card, you will realize the gap.

First, E3 has no advantage over CAD at all, and is inferior to the high-frequency i5.

Second, the graphics card GTX560Ti is a gaming graphics card, not a drawing professional card, and you can only change a professional card if you want to achieve the situation you said.

Computers include monitors, speakers, keyboards, and mouses, and consoles. There is a power supply, a hard disk, a motherboard, and a CPU memory plugged into the motherboard, a graphics card, etc. If you want to do CG, you have to need a professional graphics card, considering that you have to play games, you can choose a high-end graphics card, the budget of 4000 is too low, 6000 thinks it is appropriate.

Now the general configuration will meet your requirements.