What to do if the CCD light positioning punch machine display screen is blue

If the boot blue screen does not appear often, try to turn it off at boot. If it still can't, press F8 to the advanced option to let go immediately after booting, select "The latest correct configuration" Enter to repair, and press F8 to enter the safe mode to restore the system or reinstall the system (if the reinstallation is also a blue screen, it is recommended to overhaul it, if you can enter the safe mode, uninstall all the inappropriate things before the accident).

First soft and then hard, such problems are caused by software conflicts, inappropriate drivers, and system problems, you can restore the system in safe mode, or not reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.

If there is a hardware, take out the motherboard battery and put it on the charge, plug and unplug the memory, clean the graphics card, check whether there is a problem with the hard disk, and if it doesn't work, just overhaul it.

If it is a boot blue screen number 0-100 detection hard disk, please say.

Use the system that comes with the system restore method:

The system comes with the system restore: "Start" "Programs" "Accessories" "System Tools" "System Restore", click "Restore my computer to an earlier time", press Next, you will see that the date page has a dark date, that is the restore point, after you select, click Next to restore (win7 restore the system, in the control panel then the device and security sub-option and then the backup and restore sub-option).

1.See if there is a sound; There is a sound indicating that the TV signal is fine, check whether it is improperly adjusted or the TV is faulty. The absence of sound indicates that the TV signal may not have come in.

2.Look at the blue screen and whether there are snowflakes; If there are snowflakes, the TV is not bad.

3.There is no snowflake, no black screen, no sound, to see if the power indicator is on; Bright is the problem of the TV,If it is not lit, see if there is a problem with the external power supply,Eliminate the power supply problem is the problem of the TV。

Mine is the same, is the landlord's problem solved?

Same issue as above.

I don't know what brand of image measuring instrument you use, but I can only talk about the idea of dealing with this situation. First check the software, see if the card driver is installed, and whether there is a problem with the light source setting in the software, if these two are no problem, then check the hardware, see if the **line and**card are plugged in, the above problems are simple, you should be able to solve them yourself, if the above is no problem, then it may be that the CCD camera is broken, you have to contact the manufacturer to deal with it.

If the display is a blue screen, it can only be that the CCD has no signal to the computer, either the interface is connected incorrectly, or the ** wire is broken or the contact is poor, and there is a relatively rare occurrence that the CCD is bad, or the CCD's power cord is damaged, resulting in the CCD not working.

Introduction of automatic punching machine: the automatic punching machine system captures and analyzes the sampling patterns within the visual range of the camera through the computer; Control the displacement of transmission components and punching of pneumatic components. Automatically meet the customer's requirements for fast punching speed, high accuracy and simple operation.

Punching machine is a general term for target hole processing equipment. The target brightness difference hole was first seen in the PCB multilayer circuit board lamination process. In recent years, for the positioning holes that need to be positioned and processed, everyone calls them target holes.

Because the machining accuracy of the target hole directly affects the accuracy of the product, and the punching machine can control the positioning hole processing accuracy stably within the range by virtue of positioning CCD visual scanning and computer-controlled automatic alignment system, so more and more enterprises introduce the punching machine as a special equipment for positioning hole processing, replacing the traditional manual drilling, which greatly improves the quality of the product, reduces scrap, and improves the market competitiveness of the enterprise.

According to the degree of automation, the punching machine can be divided into manual punching machine, automatic positioning alignment punching machine, automatic punching machine, super automatic punching machine, etc.

Computer Blue Screen Reason:

1. Insufficient virtual memory causes system multi-tasking errors.

2. CPU overclocking causes arithmetic errors.

3. The incompatibility of the memory module or the loss of the Lu Sohe is bad causes the operation error early.

4. The optical drive is opened abnormally when reading the disk.

First of all, check the line to see if it is not a bad contact, if the line is good, it may be that the reversing image camera is broken, and it can only be replaced with a new one.

There are many reasons for the problem you described. For example, 1, motherboard compatibility problem 2, line failure, whether there is a virtual connection problem, etc. 3, camera failure 4, circuit problem, voltage stability or not, whether the line has a short circuit, etc. It's a good idea to have it checked at a specialist shop.

The blue screen appears when reversing, it should be a rear camera malfunction, and my car has also appeared before. It's good to change the rearview camera, and then I bought a *** one, and it's okay now.

Mine also has the same problem as the landlord.,Has the landlord solved it?

Landlord, has your problem been solved?