What are the materials of the inner liner of the electric oven? Which material is the best and safes

At present, the oven liner is generally made of enamel material, which has no radiation, no pollution, no residue, easy to clean, and no harmful substances. There are also several liner materials below:

Galvanized steel sheet: It is the most used material in the domestic oven market, but it is gradually being replaced by aluminized steel plate.

Advantages: low cost, can withstand high temperature of 300 degrees, corrosion resistance is acceptable, can basically meet the requirements of the oven for the inner tank (the maximum temperature in the general oven is 250 degrees).

Disadvantages: Due to the characteristics of galvanized sheet, the life span is low at high temperature, and the surface oxidation may occur after a few years of general household use, which is not good for health.

Aluminized steel plate: At present, conscientious manufacturers use more liner materials, which are becoming the mainstream of the household oven market.

Advantages: It can withstand high temperature of 600 degrees, has strong oxidation resistance and corrosion resistance, and its life is at least 60% longer than that of galvanized sheet. At the same time, the thermal reflectivity can reach 80-90%, which is a good insulation material.

Foreign ovens basically use aluminized steel plate as the oven liner. Tested by a professional team, it is a healthy and environmentally friendly material, and can be safely used in food processing.

Disadvantages: Due to the low hardness and high friction coefficient of aluminized steel plate, there will be occasional unsmoothness when pulling the baking net.

Stainless steel plate: high-end liner material, commonly found in large built-in and commercial ovens.

Advantages: High temperature resistance and oxidation corrosion resistance are slightly higher than that of aluminized plates, longer life, suitable for commercial ovens that bake food for a long time.

Disadvantages: **High, the surface is easy to dirty, and it is not easy to clean.

Non-stick coated liner: Generally, a layer of non-stick coating is sprayed on the surface of galvanized sheet or aluminized plate to facilitate oven cleaning.

Advantages: The base sheet is the same as the galvanized sheet or aluminized version, and the non-stick coating makes it easy to clean the oven.

Disadvantages: Due to the different spraying processes of various manufacturers, it is not certain whether harmful substances will be released after a long time at high temperatures.

There are several kinds of materials, but the most common one is stainless steel.

The best material for the oven liner:

1. Galvanized steel plate.

Galvanized steel sheet is often used to make electric oven liners, which are low cost, high temperature resistance, and corrosion resistance, but the life is short, and the surface will oxidize after a few years of use. If used for a long time, it can be detrimental to human health and has been gradually replaced by aluminization.

2. Aluminized steel plate.

Aluminized steel plate is a healthy and environmentally friendly material, which is resistant to oxidation, corrosion, and high temperature. After testing, it can withstand high temperatures of 600 degrees, and its life is at least 60% longer than that of galvanized sheet for long-term use, so it can be used with confidence.

3. Stainless steel plate.

The stainless steel plate is a high-end liner material, which is high, but it is corrosion-resistant and high-temperature resistant, easy to clean, and has a longer life than the first two liner materials, which is suitable for making commercial electric ovens.

How to choose an oven.

1. Oven volume: How much oven capacity to buy can be decided with reference to the area of your own kitchen, generally speaking, about 20-30L oven is enough for the general family congratulatory group, 20L or less oven because of the large temperature difference between the center and the edge is easy to cause uneven heating, but it is better than the lowest price, for the oven that wants to try the oven Xiaobai can start with a try.

3. The steam function of the oven: Some ovens will have this function, which is very necessary for people who often use the oven to make bread, because the steam function will spray water steam when baking, which can make the baked bread crust crispy and fluffy.

4. Oven hot air function: The oven hot air function can greatly improve the air exchange efficiency in the oven, make the food heated more evenly and thoroughly when baking, and also make the food can be quickly colored, so it is considered that this function is necessary.

The advantages of built-in ovens are quite numerous. The sealing performance and thermal insulation performance are very good. The temperature regulation is also more accurate, and the bending is more uniform than that of the desktop.

Built-in ovens are more fat-saving, regardless of the hygienic dead spots at the bottom and corners of the oven, only need to wipe the door and the inner tank. It is recommended that the built-in oven be relocated with a good location considered when newly decorating, and it is not convenient to reinstall the location later. It is best to assemble in the middle layer.

It's best to decide on a specific height based on your height. It can't be too high. Because the oven door is usually downward, it is too high and not conducive to the food and the state of observation.

The advantage of a tabletop oven is that it can be placed anywhere in size, function, and is more suitable for families who do not have a reservation oven. **The gap is also relatively large. Even 100,200 mini ovens can meet the needs of families of different consumer classes.

The oven operating panel is mainly made of stainless steel and tempered glass. Tempered glass has a beautiful appearance, is larger, and is easy to clean. Stainless steel is rust-resistant, easy to clean, safe and hygienic.

The characteristics of various liner materials of the oven are: the enamel material has the characteristics of no radiation, no pollution, oil prevention, and easy cleaning. Galvanized steel.

Galvanized steel material is the most used oven liner material, with a high temperature of 300 meters and low cost. The aluminized steel material has strong thermal insulation function, high temperature up to 600, strong oxidation and corrosion resistance, long life, and is a healthy and environmentally friendly liner material. Stainless steel material.

High-grade liner material, high temperature and oxidation corrosion resistance slightly higher than aluminum, ** high, the surface is easy to dirty, not easy to clean. Interior walls without coating. By spraying a sealed non-oil protective layer on the surface of the galvanized or aluminized sheet, the grease separation and corrosiveness are again improved, the oven is easier to clean, and the ability to prevent scratches is also higher.

When choosing an oven, it is best to choose a regular professional oven brand.

The safety inspection and quality are in line with the national quality inspection requirements, which makes it more safe to use. The aluminized liner is low, and if you don't use it much, this liner can also be fully used. Note that the stainless steel liner and the enamel liner have similar properties in terms of corrosion resistance and high temperature resistance, but the oven marked with the enamel liner is actually not enameled on all sides, some have three-sided enamel, some are four-sided enamel, and all sides are not enamel.

In short, aluminized is cost-effective, stainless steel is durable, and enamel is high.

There are many materials, such as stainless steel, and some plastic materials, tempered glass materials, aluminum alloy materials, acid-resistant steel materials, which are of good quality.

The ovens are made of stainless steel, aluminum alloy, glass, ceramic, artificial alloy and other materials.

Enamel, aluminized steel, stainless steel, tempered glass, aluminum alloy material, generally these materials, the quality is still very good, and the performance is also very good, in terms of the first is relatively cheap.

The oven is made of aluminum, stainless steel, tempered glass, ceramic, artificial alloy, etc.

There are plastic, aluminum, iron, stainless steel, tempered glass. These are very distinctive.