-
After the washing machine is used for a long time, due to the wear and tear of the machine, the lack of smooth oil, the aging of the parts, the deformation of the spring, etc., there will be various abnormal vibrations and noises. If it is not repaired in time, it will lead to accelerated wear and tear of the parts of the washing machine and direct damage. In fact, vibrations and noise can be eliminated or reduced with proper adjustment and simple repairs.
1. When the laundry is running, the fuselage makes a thumping sound. This kind of problem is mostly caused by the collision between the inner drum and the shell of the body, and it may also be that the washing machine is not placed evenly or the four base legs are not completely in contact with the ground. In this case, the center of gravity of the washing machine needs to be adjusted appropriately.
2. When the laundry is running, the wave wheel rotates and makes a gurgling sound. If there is still a gurgling friction sound when the roller is running, it means that the rotation of the roller is caused by friction with the bottom of the laundry bucket. If you continue to put in the laundry, it will be louder.
The cause of the failure may be that the wave wheel screw is loose, the wave wheel can be removed, and then a washer of appropriate thickness is added to the bottom of the shaft to increase the clearance distance between the wave wheel and the bottom of the barrel, eliminating collision or friction between the two. If the outer ring of the wave wheel rubs against the laundry bucket, the wave wheel should be removed, trimmed and then installed.
3. When the motor is running, the running belt makes a crackling sound. This is caused by the prolonged wear and tear of the transmission belt. During maintenance, the fastening screws of the motor base can be loosened, and the motor can be rotated in the opposite direction of the wave wheel shaft to make the transmission belt tight, and then the fastening screws of the base can be tightened.
-
You can check whether there is something underneath the product, or the ground is not flat enough; In the case of a roller, the transport bolt on the back needs to be removed.
-
There are different reasons why the washing machine makes a loud noise when washing clothes or spinning drying, depending on the sound
1: The sound of metal crashing. Check whether there are metal buttons or other metal objects touching the inside of the laundry bucket on the outside of the laundry clothes, and if so, turn them inside and wash them again.
2: Click-click. This sound may be caused by a small object such as a coin falling under the washing wheel, so you need to remove the washing wheel and check it.
3: The buzz is loud. This kind of noise is very large, it may be because the gap between the motor bearing and the shaft sleeve is too large or the bearing is seriously worn, or it may be caused by the loose fixing nut of the transmission pulley and the swing of the pulley, of course, it may also be caused by the improper placement of the pulley, so check it carefully.
4: When the clothes are dehydrated, they make a lot of noise, and the body of the washing machine will beat, which may be caused by uneven placement of clothes, or it may be the leakage of the dehydration balance ring of the inner barrel.
5: There is also a possibility that the clutch spring is broken and the washing machine makes a sound, and it is enough to change the clutch spring.
-
My family is too, the sound is very loud when dehydrating, hey, I also called the after-sales service, usually the laundry can only be adjusted to 600 rpm, or very loud.
-
Dear Hisense users, hello!
There will be a certain sound when the washing machine is dehydrated, but the national standard requires that the dehydration noise of the washing machine be controlled within 72 decibels, and it is recommended to contact the after-sales service to test the noise to verify whether the washing machine is faulty.
-
Is it like this every time? Let's see if it's flat, if it's flat, it may be that the clothes inside are unbalanced, adjust the clothes, now some washing machines have the function of automatic adjustment, but it's not very perfect, you put the clothes in order, try to spread them evenly, don't screw them together into pimples. If it can't be solved, or it keeps making abnormal noises, give Haier after-sales service a **, and let them come to help you test it, which is generally not a big problem.
You can doubt the quality of Haier, but you can rest assured of its service.
-
If it is caused by imbalance, it is the roller's bar Check whether there is a foreign object on the bottom of the outer side of the roller, I hope it will help you.
-
Mine is Hisense too, and the voice is so loud that it is damned! Never buy a washing machine of this brand.
-
Of course it's not normal, you first see if the body is stable, if it's stable, there is still a loud sound, hurry up and find an after-sales machine, there is a problem.
-
Reason:
1. The motor may be wet and cause rust inside, resulting in large wear and mutation sound.
2. Inner cylinder, you may accidentally drop the coins or buttons of the clothes or other things during the washing process, and there will be a sound when running at high speed during the dehydration process.
Descaling matters
The inside of the washing machine looks very clean, but you don't know that there is also an outer sleeve on the outside of the washing drum when washing, and the laundry water goes in and out of the middle of these two layers, and the water is discharged in this interlayer, and the dirt inside the interlayer is very serious.
The washing machine interlayer is actually like a sewer, its dirt is mainly composed of scale, laundry detergent free matter, fibers, organic matter, dust, bacteria and other garbage, these hodgepodge are firmly attached to the washing machine interlayer, multiply and ferment at room temperature, and the laundry will pollute the clothes to the human body, and even make people itch and allergies.
When cleaning, pour the amount of water descaler (commercially available) for the three kettles into an empty container, prepare it according to the ratio of descaler water = l 2 and stir well. Pour the mixed descaler solution from the detergent addition box, being careful not to spill on the **. Then press the power switch of the washing machine and set the program to "Washing Schedule" (select the longest time) to rotate the washing drum.
After the descaling solution is discharged from the drain pipe into the barrel, the discharged descaling liquid is added from the detergent addition box, and so on many times until the program is finished, and the filter is opened to clean the filter.
-
The washing machine makes a big noise when it is spinning
1. The gap between the motor bearing and the shaft sleeve is too large;
2. There may be clothes with metal objects colliding and making a loud noise;
3. It may be that there is a metal object falling under the washing wave wheel;
4. It may be that the clutch spring is faulty, resulting in a loud dehydration sound;
5. It may be caused by uneven placement of clothes.
The washing machine is very loud when it is dehydratedSolution:
1. There is a loud buzzing sound when dehydrating. This noise is caused by too large a gap between the motor bearing and the bushing, or by severe bearing wear. In addition, it is also possible that the transmission pulley fixing nut is loose and the pulley swings, and it may also be caused by improper placement of the pulley.
2. Make a sound when dehydrated. Check the garment for metal buttons or other small metal items that make a loud noise when they touch the inner wall of the garment tube, and if so, remove the metal object or hide it inside the garment.
3. Make a clicking sound. This is when a small object such as a coin has fallen under the washing wheel, and it is necessary to remove the washing wheel for inspection and remove the foreign object.
4. The noise may be caused by the failure of the clutch spring, which causes the washing machine to make a lot of noise, and the clutch spring needs to be replaced.
-
If you use a fully automatic drum washing machine, because this kind of washing machine uses the way of drainage, when the washing machine is dehydrated for drainage, it is necessary for the water pump in the washing machine to pump out the washing water from the washing machine drum, and then transport it to the drainage hole at the upper end of the washing machine, and when it flows out through the drainage pipe, the water pump will make a relatively loud sound when working, so when this happens, it is considered a normal phenomenon.
Because there is no unified standard for the quality of different brands of washing machines on the market, the sound of some washing machine pumps will be smaller, and the working sound of some washing machine pumps will be very loud, so if you have high requirements for the sound size, it is best to ask this question when buying a washing machine, and if there are world bridge conditions, it is best to try it on the spot.
In addition, when the washing machine also makes a loud noise when washing, it may be that there is a problem with the drum bearing of the washing machine, resulting in the unbalanced or jamming of the washing machine during operation, at this time, it is necessary to let the after-sales maintenance personnel of the washing machine as soon as possible to carry out a comprehensive overhaul of the drum of the washing machine, and after repairing the bearing problem, the noise phenomenon can be eliminated.
-
Summary. Dear Hello: The reason why the washing machine rumbles when it is dehydrated:
1. Unbalanced placement of clothes will lead to uneven stress on the washing machine, resulting in the sound of the inner bucket hitting the side of the washing machine. You can lay out the laundry flat, and the washing machine will dry properly. 2. If the motor bearing is damaged, the bucket will hit the inner wall when washing clothes, and the washing machine will rumble when it is dehydrated, and the motor shaft needs to be replaced.
Hello: The reason for the rumbling sound of the washing machine when it is dehydrated: 1. The unbalanced placement of the clothes will lead to the uneven force of the washing machine, and the bridge source will cause the inner bucket to hit the side of the washing machine and make a sound.
You can lay out the laundry flat, and the washing machine will dry properly. 2. If the motor bearing is damaged, the bucket will hit the inner wall when washing clothes, and the washing machine will rumble when it is dehydrated, and the motor shaft needs to be replaced.
3. The screws of the washing machine are loose, and the screws will be loosened due to the use of the washing machine for a long time, and the washing machine will make a noise. 4. If there is a problem with the starting capacitor, the problem with the starting capacitor pin chain device will cause abnormal noise when drying clothes, and if the capacitor is broken, replace the new capacitor. 5. The imbalance of the washing machine can be measured with a balance ruler, and the balance of the washing machine can be quickly turned.
-
There are three reasons why the dewatering chamber of a washing machine rumbles violently.
The washing machine may rumble when washing clothes and dehydrating, what is the situation of the rumbling of the washing machine, and then Ku Yuanhui will introduce it to you, let's take a look. The rumbling of the washing machine may be caused by the friction of the zipper or button against the inner bucket, which can turn the laundry over and wash.
If there is a rumbling sound, it may be that a foreign object has entered the washing cylinder, open the back cover of the washing machine, take out the foreign body, and you can contact a professional to repair it. It may also be that the fixing screws of the washing tray are loose, and the screws can be retightened with a screwdriver.
In addition, the ground is uneven; Failure of the laundry bucket support, such as a falling boom, misaligned or broken springs; Severe wear or loosening of dehydrated bearings; Larger pieces of clothing are not leveled; Cracked or leaking balance ring of the dehydration bucket; Loose clutch lock nuts are all possible causes of a rumbling washing machine.
The way to drain the water when the washing machine cannot be powered on:
1. Manually scoop the water out.
2. Take a screwdriver and other tools to open the back cover of the washing machine, find a valve at the bottom of the washing machine at the connection between the drain pipe and the washing machine, and manually press the valve to drain the water.
3. Remove the chassis of the washing machine from the inside of the washing machine, find the drain valve from the inside, and press or lift the operation to drain the water.
-
The possible reasons are: debris in the washing machine; The washing machine is not placed smoothly; Clothing is placed unevenly in the inner tube; Too little laundry to wash; deterioration of internal parts; As well as the failure of the dehydration motor and the dehydration barrel, etc., the specific solutions are as follows. 1. When you find that the dehydration sound of the washing machine is too loud, turn off or suspend the operation of the washing machine and then check whether there is any debris in the dry bucket, and then when washing clothes, you must pay attention to whether there is debris in the clothes, if there are sundries, take them out, so as not to cause damage to the washing machine.
2. If there is no debris, observe whether the washing machine is placed smoothly, shake it back and forth with your hands, if the washing machine will shake with it, it is not stable, and the washing machine can be placed steadily, if the clothes are smaller than the rated amount, it will cause the washing machine to vibrate too much, and the sound will be loud, then add a little more clothes, but remember not to exceed the rated capacity. 3. If the internal parts are aging or malfunctioning, eliminate the fault one by one, check the approximate cause, or can not solve it, contact the maintenance personnel to come to the door for maintenance, the cost depends on the specific situation, of course, usually pay attention to the maintenance of the washing machine, can extend the service life of the washing machine.
The washing machine wheel slipped for two reasons:
1. The pulley has been used for a long time, the wear is large, the friction is reduced, and if it is used frequently, the perimeter of the pulley tension will increase, and it is necessary to replace the new pulley. >>>More
1. Check whether the drainage pipe is smooth first, if it is smooth, it means yesThe water level sensor is malfunctioningIf the drainage is not smooth, it means that it is blocked. >>>More
Advantages: No damage to clothing.
Disadvantages: not clean, waste water and electricity. >>>More
Modern people are more and more inseparable from washing machines, but washing machines are also different, which is better, wave wheel washing machine or drum washing machine? In the past, everyone would choose a washing machine, but now they have chosen the drum, why is there such a change? After listening to the neighbor's analysis, I realized that fortunately, my family chose the right one. >>>More
Reasons why the washing machine can't put water in and how to deal with it: >>>More