Does the iPhone have to be stuck in a card to activate

Hello! The iPhone does have to be stuck in a card to activate!

iphone6 activation preparation:

Since it takes a while to activate, make sure that your iPhone 6 has less than 15% battery before activation.

Whether it is connected to wifi activation or computer to activate iphone6, you need to install a sim card to install it into iphone6, without a sim card, iphone6 cannot be activated.

iPhone6 uses a Nano SIM card, the card slot is located on the right side of the fuselage, before installing the SIM card, please turn it off, and then, with the help of the card pin in the box, take out the card slot, and then install the Nano SIM card into the card slot.

iPhone activation does not need to be disassembled! As long as you have an internet connection, you're good to go! If you don't have Wi-Fi, then you need to plug in the card to activate it with data!

Hello, regardless of whether the card is inserted or not, as long as the network is connected, it can be activated, because after entering the ID, you must be connected to the network to activate, so even if you do not insert the card, it can be activated, I hope it can help you.

Yes, a card must be inserted to activate. Step 1: Activation needs to install the SIM card first, so the first step of activation still needs to install the SIM phone card first, the second step, after installing the SIM card, the next step is to turn on the phone, by pressing and holding the power button on the top of the iPhone for a few seconds, you can enter the initial boot interface, the third step:

To set the iPhone language, you need to use Chinese Simplified, so when choosing the setting language, select "Chinese Simplified" Step 4: Select your country or region Here you need to select "China" Step 5: iPhone keyboard settings.

1. When the Apple mobile phone is activated on the new machine, the mobile phone card must be installed before it can be activated and used, but the mobile phone card is sometimes not recognized if it is not installed well. 2. The main reason is that the new phone has not been activated, so I can't see whether the mobile phone card is installed correctly, but if the system prompts to insert the SIM card, it proves that the SIM card is installed incorrectly and the mobile phone system is not recognized. 3. You need to take out the ** card again, and then re-install it correctly

You want to insert a card. It cannot be activated without a card.

iPhones all require a SIM card from a network operator supported by the machine to activate the network for normal use;

If your carrier network is not supported by your iPhone model, the machine will not be able to activate and will need to be used with the corresponding iOS version of the activation card to activate.

Regardless of whether you have a second-hand Apple mobile phone for the first time, you have to insert a card to verify it online. It's just that the activation of the second-hand phone will replace the last verified mobile phone card.

When activating with a mobile phone, you need to insert a card to be able to play, and you can't insert a card if you don't use an iPhone.

Do I need to insert a card for iPhone activation? Of course, the activation requires the activation of the card inserted in the card. As a result, he activates the card, and after you insert the card, the mobile phone will be added to officially enter the activation, if you don't insert the card, sometimes you can also buy goods, but it is more troublesome.

The initial activation is not necessary, but there are many steps that need to be inserted into the card after activation, so generally speaking, if you buy a mobile phone yourself, you still need to insert the card.

The first activation of the iPhone requires the insertion of a SIM card, as the activation policy information for the first activation is sent to the server.

After confirming the activation policy, the mobile phone number of the SIM card information will be entered as the first activation information.

It involves the calculation of the warranty period, so there is a lot of information collected.

So the first activation of the circle will take a little longer.

iPhone activation is to insert the card, without the card can not be activated, without the card, prove that your phone has not been used.

The iPhone needs to be connected to the Internet during the activation process, so you need to insert a card or connect to WiFi, not necessarily a card.

iPhone activation can be done without inserting a mobile phone card, and only need to be activated through a wireless network connection.

Apple mobile phone activation to network to work, card or wifi is OK, not necessarily SIM card.

Apple mobile phone activation definitely needs to be networked, now there are two ways to connect to the Internet, one is wifi, the other is data, so it can also be activated without inserting a card to connect to the network with wifi.

The iPhone can be activated without a SIM card, and the phone can also be activated when connected to WiFi.

When the iPhone is activated, it is necessary to insert a ** card that can be used normally!

This must be inserted into the card, and a mobile phone verification code is required for activation.

The activation of the iPhone must be ** card, so that you can use the mobile phone verification code to bind the mobile phone.

Not necessarily, you can also activate your phone by connecting to a wireless network.

After activation, you have to go to the official website to check the date.

You don't need a SIM card to activate your iPhone, taking Apple 11 as an example, the activation method is as follows:

1. First of all, press and hold the power button with your thumb to turn on the power, as shown in the figure below

2. Select the language and select Chinese Simplified, as shown in the figure below

3. Select the country and region, as shown in the figure below

4. Quick start to select manual settings, as shown in the following figure:

5. Click Continue on the Messages & Calls page, as shown in the figure below

<>7. Wait for the boot activation to be completed, as shown in the figure below

Hello, iPhone phones need a SIM card for cellular network activation during the activation process.

If you change the SIM card, you do not need to activate it again if the phone searches for the same operator and is the same type of SIM. Depending on the type and carrier, activation may still be required.

emmmmI activated the card first.。。 No problem at all. After activation, the card is not inserted, but it will show that there is no SIM card, and after shutting down, the card will be turned on for a while, and you can play **.

Yes, all iPhone activation requires a mobile phone card, and the iPod iPad can be activated directly.

That's right, and you need to insert the SIM card specified by the mobile network standard to activate it.

As long as yours is not the telecom version. Everything else can be activated with Unicom's 3G card.

yes, use the tool you gave me to poke the card slot open.

1.After getting the newly bought iPhone, insert the card first and turn it on. Once the SIM card is inserted, press and hold the phone's power button to boot the phone.

2.Next, follow the prompts to select the country, language, and other information. If the user's last device is an iPhone and the system is iOS11 or above, then you can click Guess Fiber to quickly start, put the two devices together, and the system will automatically log in to Apple.

3.If it's the first time you use your iPhone, you can choose to set it up manually, then do the networking operation, and set the phone password according to the prompts.

Commentary: iPhone is a series of Bu Lao Lie smart phones developed by Apple in the United States, equipped with the iOS operating system developed by Apple Inc., iOS is a mobile operating system developed by Apple Inc. Apple first unveiled the system at MacWorld on January 9, 2007.

After the iPhone phone inserts the card, it shows that it is a normal network activation step to activate.

1. When the iPhone phone is inserted into the card, enter the carrier activation page, which is the normal activation step for the mobile phone card, click [Accept].

2. Click [Accept] to return to the desktop, and find [Settings] in the application to open it.

3. After entering the [Settings] option list of the mobile phone system, find the [Cellular] setting for the next step.

4. Go to the [Cellular] management authorization page, find [Settings] and enable the permission operation.

5. After successfully enabling the set cellular network permission, press the [Home button] to return to the desktop of the phone, and the network status at the top can enter normal activation.

Yes, it cannot be activated without a card. To activate the iPhone phone, take the iPhone X as an example, and the activation steps are as follows:

Tool: iPhone X

Operating system: iOS

1. Press and hold the power button, and when the "hello" interface appears, swipe up to select the desired language.

2. After choosing a language, choose another country, and then choose China.

3. Next, select the keyboard you want to use. Once you have selected your keyboard, click Next.

4. Select a trusted WLAN.

5. Jump to the "Data & Privacy" page. Once you've reviewed the text, click Continue.

6. Set a password to unlock your phone.

7. Log in to the Apple ID, if you don't have an Apple ID, click "Forgot password or no Apple ID".

8. Set up Siri, learn shortcut gestures, and your iPhone will be activated.

Yes, it cannot be activated without a card.

Activate the iPhone for iPhone X as an example, other models are the same. The steps are as follows:

1. Press and hold the power button, and when the "hello" interface appears, swipe up to select the language of the knife you want.

2. After choosing a language, choose another country, and then choose China.

3. Next, select the keyboard you want to use. Once you have selected your keyboard, click Next.

4. Choose a WLAN you trust and try not to use a public network.

<>6. Set the unlock password, enter the face ID, and you can also enter the face ID in the future. Temporarily set a passcode to unlock your phone.

7. Log in to your Apple ID, if you don't have an Apple ID, click "Forgot password or don't have Apple ID".

8. Set up Siri, learn shortcut gestures, or appear on this page, and your iPhone will be activated.