How do I record the contents of a tape into my computer?

Software: VideoStudio or Windows comes with a voice recorder.

Hardware: a tape recorder (crap), a double head of wire.

Connect the two ends of the cable to the headphone jack of the recorder and the MIC jack of the computer respectively.

Quickly press the pause button, and the computer will recognize the recorder as "microphone accessed".

Start VideoStudio or Windows Audio Recorder.

Set the audio to the current MIC.

Start the software recording.

When a single tape is finished, the software recording can be paused.

After saving, use VideoStudio to modify, cut and save the content you need.

It is recommended to connect the interface to the front panel of the computer (several boxes have protective capacitors), and the software is recommended to use VideoStudio (convenient and easy to use. ）

Go to the market to buy a recording cable, one end is plugged into the line input or microphone on the computer's sound card, and the other end is plugged into the headphone plug of the tape recorder, and then open the recording software, and it's OK.

You can go to "Sky Software"**.

The easiest way to find a quiet place, use a loudspeaker to release it, and then use MIC to record it. If you want good sound quality, you can use the output on the table to go directly to the computer.

Dear, hello, I am glad to answer for you: how to put video tapes on the computer? A:

The steps are as follows: 1. Buy a 1394 capture card, about 100-600 yuan, and install it on your computer. 2. Install the 1394 card and NV-MX5000 driver on your computer.

3. Install the "Picture and Picture" software. 4. Use the 1394 cable (included when buying the card) to connect the capture card and install the DV tape to be collected, and turn on the DV to play the image. 6. Launch "Paint Sound and Picture" and select the "Capture" option.

7. Select the folder where the capture file is stored and click the capture button. 8. After capturing the file successfully, click the "Render" key after you finish, select the file type you want to save, if you want to burn *** disc, generally choose "pal ***" format to save. 9. Burn *** discs.

How to put video tape on the computer Hello dear, collect the ** captured by the tape camera to the computer, which requires the installation of ** capture card. Capture card, also known as card, is used to input the data output of analog cameras, video recorders, LD disc players, TV sets and other output signals or mixed data with audio into the computer, and convert them into digital data that can be identified by the computer, and store them in the computer to become a data file that can be processed. The capture card converts the analog signal into a digital signal, and then transmits it to the temporary memory that comes with the board, and then executes the compression algorithm by the compression chip that comes with the card.

Connect the line out port of the audio recorder with the line in of the PC sound card through the audio cable and record it with Cool Edit, so that there is less distortion.

The computer records the same as the one bought, the one that buys is the real thing, and the computer records the virtual file!

I don't know much about this, but if you repeat the machine recording, you can do it, as long as you keep it quiet, don't have any other sounds, and it's better to record it at night! ~~