How much tile glue should be used to paste 100 square meters of wall tiles

A few days ago, I went to the community and found that my neighbor's house was being renovated, and I wanted to go in and have a look, and found that my neighbor's house was all tiled. I thought that my neighbor had really spent a lot of money to renovate the house, but after talking to the neighbor, I realized that it was a project given by the decoration company.

This is the site of the balcony tiling. This is really a big project, I see that the master's craftsmanship is good, and he is very serious. This is the method of dry-laying tiles, which makes it more solid.

Level the ground before tiling. The next step is to apply cement mortar, which can be better bonded.

Cement mortar not only has the effect of bonding, but also makes the tile stronger.

When pasting tiles, you must leave gaps, and you must do beautiful seams in the future.

Once the tiles are attached, hit them with a hammer.

After pasting, don't forget to knock each one through.

Look at the tiles on the wall.

It's the restaurant and the whole house is tiled all over.

This is the effect of the bathroom. This is the bathroom wall tile, look at the master's craftsmanship, really good.

A partition is also designed here, which is very convenient and practical to use in the future.

Disclaimer: Some of the **** in this article is used in part of "Oriental IC", and any newspaper, newspaper, television station, company, organization, or individual may not use it in part or in whole without the permission of Oriental IC. Other **** networks, if they involve infringement, please contact the author to deal with and delete.

It's about two buckets of 5kg tile adhesive, if you're not sure, you can ask the merchant how much tile adhesive you need to paste 100 square meters of wall tiles, and he will tell you.

Tile adhesive, also known as ceramic tile adhesive, is mainly used for pasting decorative materials such as tiles, face tiles, floor tiles, etc., and is widely used in interior and exterior walls, grounds, bathrooms, kitchens and other building finishing decoration places. Its main characteristics are high bonding strength, water resistance, freeze-thaw resistance, good aging resistance and convenient construction, which is a very ideal bonding material.

According to the powder: water = proportion. Stir evenly to construct it; Within the allowable time of operation, the position of the tile can be adjusted, and the adhesive is completely dry (caulking can be carried out after about 24 hours, and heavy load on the tile surface should be avoided within 24 hours of construction).

The dosage of tile adhesive is related to many factors, such as the brand, type, concentration, packaging specifications, water ratio, size of the tiles paved, the smoothness of the base surface, etc., so there is no way to give you a detailed dosage standard.

However, the common 20kg bag of tile adhesive on the market, if you use a 6*6mm toothed spatula, then the dosage per square is about when the base surface is flat, if you use a 10*10mm spatula, then the dosage is about 5kg. The specific needs to be determined according to the product construction instructions.

When you go to buy tile adhesive, you directly say that you can buy 100 square meters of tile adhesive, and the merchant knows.

4 squares.

Under normal circumstances, a pack of 20 kg tile adhesive can be pasted to about 4 square meters, and paste large slabs of ceramic tiles, requiring the use of deep toothed scrapers, the amount of thickness deepening tile adhesive naturally increases, so a pack of 20 kg tile adhesive can be pasted about 2 squares, but large slabs of tiles also need to use tile adhesive matching, in order to really stick to large size large slabs, O'Necke has created a glue-free tile adhesive, professional pasting of large slabs and large rock slabs, to solve the situation that large-size tiles need to rely on tile adhesive, Dramatically improve efficiency and reduce costs.

Precautions for the use of tile adhesive.

1. The base must be clean. The base surface is the surface of the wall or ground that is in direct contact with the tile adhesive, and it is necessary to clean up the dust, oil stains, loose sand and other substances on it, so as not to affect the bonding effect of the tile adhesive.

2. The coating and scraping should be uniform. If the thickness of the tile adhesive and the construction application are uneven, there may be a warping of the corners of the paving and the phenomenon of tile hollowing.

3. Tile adhesive can not be soaked in water, and tiles paved with tile adhesive do not need to be soaked in water, because the tile adhesive has strong water retention capacity. For some tiles with low water absorption capacity, it is not easy to absorb water by soaking in water, so you can directly use tile adhesive to pave tiles. Such as vitrified tiles and ceramic tiles.

Tile adhesive soaked in water will reduce the bonding strength, which in turn will cause the tile to fall off.

There are two main factors influencing the amount of tile adhesive: one is the flatness of the base surface, and the other is the application tool used. The flatter the base, the less it will be used. The toothed scraper is the best tool for tile adhesive construction, and the smaller the tooth opening, the smaller the dosage.

On a relatively flat base, JCDecaux's technical engineers calculated that the amount of toothed scrapers with a width of 6mm and a depth of 6mm is about, the amount of toothed scrapers with a width of 10mm and a depth of 10mm is about 5kg, and the amount of toothed scrapers with a width of 12mm and a depth of 12mm is about 7kg. Based on the common 20kg packaging of JCDecaux tile adhesive, it can be pasted 3 to 7 square meters.

It should be noted that the large tooth mouth is used for pasting large tiles and heavy bricks, and ordinary home decoration can be done with a scraper with a small tooth mouth.

First of all, you need to understand how many kilograms of tile adhesive you are talking about? If it is 20 kg, if the flatness of the wall is better, the error can be about 4 square meters in the case of plus or minus 5 mm, and if the flatness is not good, it will be about 2 square meters. If it is a 25 kg pack, the flatness can be about 5 square meters, and the flatness is about 3 square meters.

It must be pasted below 5mm meters to reach 5 squares, otherwise it can only be 2-3 squares.

It's all cement, right, are you sticking to the background wall? View the original post

Hello dear, glad to ask your question, how much tile glue should be used for 100 square meters of wall tiles? According to the actual construction calculation, a square meter of tile adhesive with a thickness of 10mm is needed, 15kg, and the wall of 100 square meters of ridge rot is 1500kg of tile adhesive, and 38 bags of tile adhesive are required according to the calculation of 40kg per package of cherry blossoms. Thank you.

Hello, I'm glad to have your question, the amount of tile adhesive, which is related to many factors, such as the brand, type, concentration, packaging specifications, water ratio, tile size of the paving, the smoothness of the base surface, etc. Under normal circumstances, if it is less than 300 300 Qiaoyouye tiles, the amount per square is about kilograms, and 100 square meters need 350 kilograms. If it is more than 300 300 tiles, you need 5 kg per square meter, and 100 square meters need 500 kg.

Hope it helps you and I wish you a great life

How much tile adhesive and adhesive do you need to use for a 100 square meter house, 100 square meters to feast with 25 packs of adhesive, if it is less than 300 * 300 tiles, then it is recommended to use 6 * 6mm toothed scraper, the amount per square is about it. If it is a tile greater than 300*300, then you need to use a 10*10mm toothed scraper to meet the requirements of bonding, and the amount per square meter needs to be about 5kg. At the same time, there is now 20kg of tile adhesive per bag of Xiangtuan Ling orange on the market, ** is between 40-60, then a pack of tile adhesive can be pasted 4 square meters, which is derived

4x25=100 squares!

Summary. Hello there! The floor tiles are 800 by 800 or 600 * 600, and now the home decoration is 800 * 800, which looks atmospheric.

**The difference is large, the best ones such as Mona Lisa, Nobel, etc., may cost 300 yuan a piece, and the high-grade ones are generally more than 90.

About 100 square meters of house, how much is tiled.

Hello there! The floor tiles are 800 by 800 or 600 * 600, and now the home decoration is 800 * 800, which looks atmospheric. **The difference is large, the best ones such as Mona Lisa, Nobel, etc., may cost 300 yuan a piece, and the high-grade ones are generally more than 90.

It is recommended to use more than 50 for ordinary home decoration, and the economy does not allow the use of cheap ones. Now the quality of the floor tiles is no problem, as long as you fancy the color, and then try to splice 4 bricks without large joints.

The salary for floor tiles varies from place to place, generally ranging from 8 yuan to 20 yuan (one flat). Therefore, a 100-square-meter house is to use 120 800*800 floor tiles, excluding toilet floor tiles.

Pro-3, I hope it helps you, give a thumbs up!

If necessary, you can contact me at any time, or you can click on my avatar to pay attention, and you can make targeted inquiries if you have troubles in the future, I am happy to serve you! Have a nice day!