What are the cleaning methods for air conditioners?

1. What are the cleaning skills of air conditioners?

1. Do not leave a clean dead corner. In addition to cleaning the filters and fins of the air conditioner, it should also include cleaning the air inlet and outlet outlets, the inside of the air conditioner cover, and some dead corners such as the turbine that traps dirt and dirt. Mul.

2. Do not use hot water above 50 meters. In order to avoid the deformation of the filter, the water temperature should not exceed 50 or more when cleaning, and laundry detergent, dish soap, gasoline, banana water, etc. should not be used. Mul.

3. Disassembly and cleaning are more thorough. If you spray the cleaning agent directly like cleaning the heat sink, it is inevitable that there are some places that cannot be sprayed directly or conveniently by the nozzle, and the components that need to be cleaned by the air conditioner are all detachable components, so it is recommended to remove the corresponding parts and clean them thoroughly. Mul.

Cleaning the air conditioner requires a complete set of tools, so it looks more professional. First of all, turn on the air conditioner to test the machine to see if the machine is running normally. After the normal operation of the test machine, cut off the power supply of the air conditioner.

Dismantle the air conditioner shell, start cleaning, remove the filter, install the cleaning sleeve and sewage pipe, which is used to store sewage and prevent dirty indoor environment. The high-pressure water gun rinses visible dust and dirt with a professional aircon cleaner to remove stubborn stains and bacteria. Use a high-pressure water gun to clean the filter and housing, and then install the clean filter and housing.

Plug in the power supply, turn on the air commissioning machine, and see if the air conditioner can work properly. The cleaning process is complete.

Check if the air conditioner is working properly before cleaning, and then turn off the power. Remove the shell and panel of the air conditioner according to the instructions, and remove the filter. Moisten the area to be washed with a watering can so that it can be foamed for better cleaning.

Spray the air conditioner cleaner on the cleaned fin with a watering can and let it react for 5 to 8 minutes so that it can penetrate and decompose thoroughly to remove stains in the gaps and on the surface of the fins.

Use a scraper to scrape the foam on the surface of the fins, and the uncleaned stubborn and deformed fins can be cleaned with a fin comb. Use a steam spray cleaning machine to sterilize, disinfect, and decompose oil stains on the cleaned fins.

Use an air conditioner cleaning machine to clean the cleaned radiator with clean water. Wash the filter and replace the panel. Install the chassis and panel, return the air conditioner to its original installation position, and turn on the machine for 20 minutes for inspection and acceptance.

The air conditioner at home has been used for a long time, and there may be some dust left inside that needs to be cleaned. What are the air conditioner cleaning methods? PChouse will take you to find out.

There are usually recesses on the left and right sides and underneath the air conditioner, which are about the size of a finger. Clasp the sides with your fingers and slowly open the gap until you see the panel. With a little force, you can snap the gap open.

After the button is opened, the whole panel comes out, and when you push the panel up, you can see the filter. The cleaning method is as follows:

1. Hold the filter in your hand and shake it gently, and take it out slowly, there are two pieces in total.

2. Take it to a place with a faucet and flush it, brush it with a brush and rinse it with clean water, and let it stand.

3. See if the aluminum sheet is dirty, and if it is dirty, wash the aluminum sheet with laundry detergent.

4. Wash the back side of the mask, dip the brush with a little water, brush the oil stains, and then wipe it with a rag.

5. Slowly put the filter back into the air conditioner according to the previous method of removing it, but be sure to align the card slot.

<> "Air Conditioning Cleaning. 1) Spray the cleaning agent to start the car air conditioner cleaning machine, and spray the neutral cleaning agent into the air duct of the car with high-pressure spray from the air inlet to decompose the dirt and oil; Remove the air conditioner filter; Fix the torch and aim it at the evaporation tank; During the whole cleaning process, keep the air conditioner on to the maximum wind speed.

2) Spray clean water to start the car air conditioner cleaning machine, never have a section of the air inlet, clean the air duct of the air conditioner with high-pressure atomized water, then you can see a large amount of dirty water discharged from the drain of the air conditioner, and remove the cleaning liquid and dirt remaining in the car.

3) Disinfect and sterilize the air conditioner and the inner room, start the car air conditioner washing machine, and disinfect the air conditioner with high-pressure atomized disinfectant from the air inlet.

After spraying the disinfectant, close the doors and windows, adjust the hot air of the air conditioner to the maximum, and circulate it for 15 minutes.

1. To clean the air conditioner, first pay attention to unplugging the power plug.

2. Open the air conditioner cover.

3. Take out the air conditioner filter that needs to be cleaned.

4. Then pour a small amount of dish soap into the air conditioner filter.

5. Clean the filter with a scouring pad.

6. After cleaning, put it in a cool place next to it to dry, and do not expose it to the sun.

7. Then, use a rag dipped in a small amount of toilet water to clean the blades above the condenser pipe of the air conditioner. Note that you can only wipe up and down, not left and right, otherwise it is easy to damage the blade.

8. Wipe the air conditioner shell with a rag.

9. Put the dried filter back up.

10. And cover the outer cover of the air conditioner.

11. Check the socket, the air conditioner cleaning process is completed, and it can be used normally.