What type of engine oil is used for Audi A6L, and what oil is suitable for Audi A6

Audi A6 is mainly equipped with Volkswagen EA888 engine, so the model that uses engine oil is mainly based on Volkswagen's requirements, specifically the following points.

First, choose a fully synthetic motor oil with a viscosity of 5w40.

Second, choose an oil with a higher total base number to neutralize the acid group in the gasoline and slow down the deterioration of the oil.

Thirdly, it is necessary to choose the engine oil of the ACEA (European Automobile Manufacturers Association) standard, the reason is simple, there are many oil standards in the ACEA, which were proposed by the "Volkswagen Group", one of the members of the association.

Fourth, to choose a motor oil with a higher high-temperature shear viscosity than HTS, the same ACEA A3 B4 standard requires HTS >, which is also proposed by Volkswagen. If it is lower than this value, the phenomenon of burning engine oil will occur.

This engine oil is good, alleviating the burning of engine oil in German cars, and the parameter indicators are fully implemented in accordance with the ACEA standard.

It is recommended to change the engine oil of 5w40 0w40 once every 5000 kilometers, and you can choose to change the engine oil of large brands, and it is best to use fully synthetic engine oil imported from Germany.

Because of the characteristics of Audi's engine: mesh oil storage grid cylinder wall, the original design intention is to facilitate the cylinder wall to store lubricating oil, to meet the fierce working conditions to provide sufficient lubrication and protection, the German production of engine oil is in accordance with the characteristics of German cars research and development, the oil resistance to high temperature evaporation is superior, will also reduce oil consumption, Audi car maintenance to choose a good oil is not the phenomenon of burning engine oil at all.

What oil does the Audi A6L use? What oil does the Audi A6L use? Audi A6L engine oil can be used with Shell.

Carlton, Mobil.

Both. It is recommended to use a fully synthetic motor oil of SN5W 40. It can be extended to 7500 km and replaced.

And this level of oil lubrication will be better, which will extend the life of the engine. The Audi A6 generally uses 5W40 and 0W40 oils. There is an option to change to a large brand of oil.

At present, the market sells better, Mobil, Shell, and Castro.

The difference between 0w40 and 5w40 is the low temperature fluidity, in other words, the lowest temperature that is applied is different. The owner can choose 0w40 or 5w40 oil according to the minimum driving temperature. In China, Zhaozao uses 5w40 in most areas, and only a few areas (such as Harbin) require 0w40.

The engine is the heart of the car, and many metal surfaces in the engine rub against each other. These parts move fast, have harsh environments, and can operate at temperatures of 400 to 600 °C. Under such harsh working conditions, only qualified lubricating oil can reduce the wear and tear of engine parts and extend the service life.

Due to the base oil.

Differently, the motor oil on the market can be simply classified as mineral oil.

and synthetic oils (vegetable oils are not counted due to the scarcity of production). Synthetic oils are also divided into fully synthetic or hungry oils and semi-synthetic oils. Lubricants are mainly divided into mineral base oils and synthetic base oils.

Mineral base oils are used in a wide range of applications (more than 95%), but some applications require the use of products made from synthetic base stocks. The Audi A6 is recommended to use fully synthetic motor oil. Self-priming engines have lower oil requirements.

Mineral oils and semi-synthetic oils are acceptable, as well as fully synthetic oils if your budget allows. Compared with self-priming engines, turbocharged engines have a more precise internal structure, a more demanding working environment, higher requirements for oil quality, and better fluidity. It is best to use fully synthetic oils.

Audi A6L( Check Transaction Price |.)What type of engine oil is used? Auto Network: I'll answer for you.

Audi A6 L uses engine oil model: Mobil.

No. 1 0w40; This type of engine oil is suitable for fully synthetic engine oil that can be used from 0 degrees 30 degrees in winter to 50 degrees in summer, and it is absolutely high-end. Or Grey Shell.

Engine oil, 0w40 or 0w30 is OK, it is also a fully synthetic engine oil, which is also a high-end product.

Both Shell and Mobil are fine, depending on what grade of oil you choose. However, it is not advisable to change the oil of different brands more than once.

It is more appropriate for the Audi A6 to choose 5W40 fully synthetic engine oil, in order to prevent the A6 from burning the engine oil.

It is recommended to use fully synthetic engine oil imported from Germany, because Audi's engine characteristics: mesh oil storage grid cylinder wall, the original design is to facilitate the cylinder wall to store lubricating oil, to meet the fierce working conditions to provide sufficient lubrication and protection, but the disadvantage is to increase the demand for oil, the mesh grid sealing is slightly poor, resulting in the piston is easy to bring a small part of the oil to the combustion chamber, increasing the oil consumption, the oil produced in Germany is developed in accordance with the characteristics of German cars, the oil resistance to high temperature evaporation is superior, it will also reduce oil consumption, like Audi cars.

When choosing a good engine oil during maintenance, there will be no burning of engine oil, & ls quo; Jin''

The use of 4 types of PAO fully synthetic base oil, imported from Germany, Volkswagen car series many are used, the feedback is good, it is recommended.

General comment: Audi A6L has gone through 8 generations of changes since the birth of Yuanfu, and is a C-class car in the domestic market.

The benchmark position has also been firmly sitting for many years, it can be described as a very successful model, the spacious riding space brought by the long axle and the full sense of science and technology are the highlights of the Chinese people's love.

Model specifications of Audi A6L application oil: Mobil One 0W40; Or dark gray Shell engine oil, 0w40 or 0w30, it is also a full generation of engine oil, the same is a high-end product. Both Shell oil and Castrol are OK, depending on which grades of oil are chosen, but it is not recommended to replace different well-known brand oils several times.

Audi A6L six-cylinder can add a few liters of oil mainly based on the displacement, the displacement is not the same, the amount of oil required is also different, such as the six-cylinder must be increased by the amount of oil, and the oil must be raised.

It is very suitable for Audi A6 to choose 5W40 full generation engine oil, in order to better avoid A6 burning engine oil, it is proposed to use imported full generation engine oil. Due to the characteristics of Audi's automobile engines: mesh reservoir lattice cylinder walls, the design scheme is designed to facilitate the storage of grease in the cylinder and back to the wall, so as to achieve sufficient lubrication and maintenance under severe working conditions.

But the disadvantage is to increase the demand for oil, the mesh grid airtightness is slightly weaker, resulting in the piston rod is very easy to send a small part of the hydraulic oil to the engine combustion chamber, improve the fuel consumption, the oil made in France is based on the German car hunger characteristics to product development, the oil resistance to high temperature volatilization work is excellent, will also reduce the cost of oil, love Audi car maintenance when choosing a good oil is impossible to produce oil burning.

The self-priming module has general regulations on the quality of the engine oil, mineral engine oil and semi-synthetic engine oil can be used, and if the buyer has a large budget, he can choose to use full-generation engine oil. Compared with the self-priming automobile engine, the turbocharger automobile engine has a higher precision inside the module, the operating natural environment is more stringent, the applied grease refined oil is more advanced, and the engine oil must be more liquid, and it is best to apply the full generation engine oil.

The Audi oil model is 5w40 (capacity, all synthetic oil, oil change interval 10,000 km. You can choose from international brands such as Meisfu and Shell and Castrol; Domestic brands such as Great Wall, Kunlun, Uni-President, etc.

Before changing the oil, stop for 30 minutes and the oil stuck to the cylinder wall will flow back into the oil pan, otherwise it will not be cleaned.

1.Open the hood (lift the four buckles of the hood).

2. If conditions permit, you can take off and land the machine, or directly use the electric oil pump for pumping. Open the small lid shown in the picture and put the tube of the pumping unit into it.

3.It takes about 15-20 minutes to pump oil, and used oil can be used in waste drums**.

4.After pumping the oil, remove the oil filter with a sleeve and wrench, wipe off any excess oil from the contact area, and install a new oil filter. (Note: The oil filter is usually placed on top, and some models require the oil filter to be removed from the bottom of the vehicle.) )

5.After adding the oil, you need to check if the oil is increasing or decreasing, which can be checked from the dipstick. The first time you pull out the dipstick, wipe it with a paper towel and insert it back in place.

The level can only be determined when the dipstick is pulled out a second time. The dipstick has two scales, the upper and lower limits, and the oil level is normal between the upper and lower limits.

Millions of car purchase subsidies.

The Audi A6L can be supplied with original special engine oil, model 0W 40 or 5W 40, or Mobil 1 0W 40. This oil is suitable for all synthetic oils and can be used from 0-30 degrees in winter to 50 degrees in summer. Or gray shell oil, 0w40 or 0w30 is fine.

It's all in synthetic motor oil, a premium product.

Introduction of oil:1Engine oil lubricates and reduces wear, assists in cooling, seals and prevents leaks, prevents rust and corrosion, and dampens and cushions the engine.

It is called the blood of the car. The engine is the heart of the car. There are many metal surfaces in the engine that rub against each other.

These parts move fast, have poor environments, and can operate at temperatures of 400 to 600 degrees Celsius. Under such harsh working conditions, only qualified lubricating oil can reduce the wear of engine parts and extend the service life.

2.The amount of oil added should be controlled between the upper and lower scale marks of the dipstick. This is because too much lubricating oil can escape through the gap between the cylinder and the piston into the combustion chamber and cause carbon deposits.

These carbon deposits increase the engine's pressure and propensity to knock. Carbon deposits are in a red-hot state in the cylinder, which can easily cause premature combustion. If it falls into the cylinder, it will aggravate the wear of the cylinder and piston and accelerate the contamination of the lubricating oil.

Millions of car purchase subsidies.