Routers that can be bandwidth stacked?????

Hehe,Actually, there's nothing to say about this.,Now only Xinxiang can be superimposed.,As for other manufacturers,TP-link,D-link,You call** to their manufacturers to ask,They all said that they can't achieve broadband superposition。

A router has only one line-in port, how can it be stacked?

Xinxiang is good, easy to use is more than 1300 yuan, I spent 600 yuan last time to buy an Aitai 520. Say that the double line is as stable as Mount Tai, and the double line cannot be used. In the end, I had to make a soft route.

Today's routers can achieve bandwidth superposition functions, only Xinxiang's immune wall router, just like the guy upstairs said, multi-wan balancing is the first to be done by Xinxiang in China, for many years. I've seen the effect, two 2m ADSL superimposed, Thunder** speed reached 500k s

Bandwidth superposition,Look at the upstairs are all very prosperous,But my friend also used the Xinxiang immune wall router,It feels great to achieve bandwidth superposition,2 6m networks can be realized12mThis can be realized,I also saw it,It feels very good。

That must be thriving.,Other so-called superimposed routers,No.,It's all IP equalization technology.,Can't be stacked at all.。

l Hehe, the upstairs are very prosperous, then you can use Xinxiang, not only multi-wan, but also immune wall routing, they are the country's first really multi-wan router manufacturer, is based on sessions port ** data, can automatically identify telecommunications, Netcom and other seven major operator lines, automatically select the optimal route, but also the most mature multi-wan technology!

Bandwidth overlay! It seems to be the earliest to do it.,02 years there was this technology.,Now the bandwidth superposition load balancing is very mature.,There is an explanation of true and false multi-wan technology on the Internet.。 I used Xinxiang when I was running an Internet café in 04, and it was not bad.

Completely rely on the router to achieve the superposition of two broadbands and improve the PC side.

Three sideless ordinary round pin routers to achieve triple network superposition.

tools

D-Link DIR629 Wireless Router (A Router).

TP-Link 402M Broadband Router (B Router).

Radio and television 4M broadband, telecommunications port, network cable into the household.

Unicom 10M broadband, optical fiber into the home, ZTE A10 F620 optical modem provided by Unicom.

Converted to an ordinary network cable, uncracked.

Setup and connection steps:

Radio and television broadband. The network cable is connected to the WAN port of the B router;

B. The WAN port of the router is set up with automatic dialing for radio and television;

bRouter LAN IP:;

The LAN 1 port network cable of China Unicom broadband optical modem is connected to the WAN port of the A router and the cavity is in the cavity oak.

A router WAN port is set up with China Unicom automatic dialing;

A router lan ip:;

a10 f620 lan ip：;

PC IP:;

Gateway.; Take a short network cable and connect it to the LAN ports of router A and B.

Select the LAN port of any router to connect to the PC

Network speed test. The connection is successful, and it is displayed as two networks.

With the 360 network speed test, the radio and television broadband is less than 500k seconds, and the China Unicom broadband is seconds, and the second after superimposition.

The PC is terminated on a router dialed up by radio and television, so it appears as Telecom.

Unexpected gain: I accidentally found that the LAN2 port of A10 F620 was open, so I unplugged the radio and television line of the B router, connected to LAN2, and set up Unicom dial-up, which turned out to be double the bandwidth of Unicom.

Triple network superimposition. I just got a TP-Link M406 router and decided to achieve triple play superimposition.

Set router C dial-up so that the LAN IP address is on the same network segment as router A and router B.

Set the gateway on the PC side: the order is router C, A, B, look at the speed, ox X, and Thunderbolt.

It's a pity that multiple gateways can't be set up on the mobile phone, but 10m broadband is enough.

Just watched Netherlands vs. Chile.

The game is cool.

Notes:

The IP addresses of both routers can use other network segments, but they must belong to the same network segment.

The IP of the ZTE A10 F620 modem is the same as the IP of the router connected to it, otherwise it cannot be dialed (Shenyang area).

Wireless routers can be repeatedly superimposed, and the router can be used directly as a switch, and the detailed steps are as follows:

How to connect two routers on the same network segment: Router B is used as a switch.

1. Router A is set up normally.

2. Router B setting method:

1. First of all, the WAN port should be vacated, and all the wiring should be connected to the LAN port;

2. Disable the DHCP service of Route B;

3. Change the IP address of the LAN port of Route B (not the same as the network segment of Router A) and change the IP address to.

Yes, but the two wireless routers used must both support the WDS function, and you can ask the seller when you buy it.

Absolutely. Connect a network cable from the LAN port of A to the LAN port of B, and then turn off the DHCP function on the router of B, so that the computers connected to A and B can be connected to each other to share files. You can also connect from the LAN port of A to the WAN port of B, and the WAN is set to automatically obtain the IP address, but the computers connected to A and B are not in the same LAN and cannot be directly connected and shared files.

Yes, but change to a different IP

You buy a high-powered router.

It's not called superposition, it's called wireless bridging, and the method is as follows:

First, set the main router: SSID, fixed channel, wireless password, and Unicom.

Fill in the SSID, password, channel and other information of the primary router on the bridge setting interface of the secondary router.

If DHCP is disabled on the secondary router, the key is that the secondary router must have the DWS function and enable it. The two routers can't be connected to the network cable, otherwise there will be a broadcast storm!

Then turn on the wireless router of your cat, and then use the router as a switch, change the router IP, turn off the DHCP server, and set the wireless parameters to the same as the wireless of the routing cat, but this is not the same device is incompatible, it is recommended that you buy two on the same wireless router.

Is Mercury wireless or wireless? The two wirelesss should not be able to superimpose the signals now, so they can only change the position with relatively full signal radiation.

There is another way, buy a pair of wireless power adapters, as long as it is in a meter, you can use the power line as a network cable, no need to wiring it. I bought a wireless power adapter, Mercury and TP wireless routing are not needed, **The signal is not good enough, just add one more transmitter to get it, it is very convenient, and it is easy to set up.

You can do a signal booster tutorial online.

There are currently two ways to do this (assuming only one route to two computers):

1. Suppose that two broadband entry routes of 2M are connected to telecom and Netcom, and two computers are connected to LAN ports, and the ** condition is set, assuming that a game is a Netcom server, and his external port is 4567, if the router finds that there is data to go to the 4567 port, it will be sent to Netcom's WAN, and in the same way, if it is the data going to Telecom, it will be sent to the WAN of Telecom, which cannot be regarded as a standard balanced load, he just does it. So the bandwidth doesn't add up, and your maximum bandwidth is still 2m.

1. Manually set the port of online banking to only use the fixed port. It's a compromise. And if the router lacks this feature, it will cause you to fail to log in to online banking or the game cannot be connected.

2. Xinxiang's product has solved this problem independently, and you don't need to set it up, but I haven't used it, and I don't know what will happen. And the thriving router** is relatively unreliable, so don't consider it at home.

Yes, you can set it up according to the wireless bridging method.

How to set up the wireless bridging mode of the wireless router:

1. Confirm the main wireless routing parameters.

Confirm the wireless signal name, wireless encryption method, wireless password, and wireless channel of the main router.

Note: Before setting up, the wireless channel of the main router needs to be fixed.

2. Set up the secondary router.

1. Modify the wireless parameters and turn on the WDS scan signal.

Connect the computer to the sub-router, log in to the management interface, click Wireless Settings >> Basic Wireless Settings, modify the SSID number to be the same as the main router, fix the channel, check to enable WDS, and click Scan.

2. Select the main router signal.

Find the SSID of the primary router in the scan page and click Connect.

Note: If WDS cannot scan the signal of the primary router, make sure that the wireless function is enabled on the primary router and try to reduce the distance between the primary and secondary routers.

3. Select the encryption method and enter the wireless password.

Key Type Select the encryption method of the main router, enter the wireless password of the main router in the Key field, and click Save after entering. You don't need to restart your router and proceed to the next step of setup.

4. Set the wireless password of the secondary router.

Click Wireless Settings >> Wireless Security Settings, select WPA-PSK WPA2-PSK, set the same wireless password as the main router in PSK Password, and click Save. When the system prompts "You have changed the wireless settings, it will take effect after restarting", click Restart, and when the restart prompt page pops up, click OK and wait for the restart to complete.