How to connect V3 to a computer, how to connect Motorola V3 to a computer

Tell you a relatively simple way.

That is, V3 itself comes with Bluetooth.

You go buy a Bluetooth adapter (it doesn't cost much) and install it on your computer and turn on the Bluetooth on your phone.

If you don't want to spend money. That can only be done with a data cable.

Although it will be a little troublesome. But it's not that hard. And the transfer speed is faster than Bluetooth.

Assemble the drive. Run Select Connect your phone with a cable.

And then it's OK!

Search for a v3 driver on the Internet first, when the v3 is connected to the computer with a data cable, the phone shows charging, which means that the phone and the computer are connected correctly. The second step is a software motophone, green version, no installation. Open the mphonetools file in the package, and the interface of a v3 phone will appear.

You can transfer files between your phone and your computer.

It seems that there is a moto universal drive thing, and the next latest version will be installed. In the future, all moto phones don't need to find a new driver.

When you buy a v3, there should be a cable drive drive in the box, you can install this disk on the computer!

I've been successful and it's different from the one above.

Plug in the line-first-down driver.

Unzipping is a folder.

My computer. Attribute hardware.

Device Manager.

Other equipment. Let's install the driver.

in the next PC suite.

Just go into the PC suite.

Everything that is said is easy to search.

The drive is very small, a few hundred k

Hello upstairs.

Tell you how to do it with v3ie.

Probably the same as v3.

Cable, connect, plug in your computer and you're good to go.

Where did the upstairs one copy from, it's so troublesome.

Go to the next p2ktools in general, which comes with a driver, but there is really no next, connect it to the computer with a data cable.

Open P2K and click on the A drive on the left.

Upload ** to click on the pictures folder.

Then drag the ** you want directly to the file list on the right and it's OK *** is the audio folder.

Easy to put hehe.

Go straight to the home of your phone! Find what you want!

v3 even the computer will not be displayed in my computer,Because he is not a mobile hard disk or something,So there will be no new drive letter,You have to use a software to send things to the V3 mobile phone,Use this software p2ktools,You can view your phone's things,You can also send things to delete things。

Khan....It won't appear in my computer.,After the driver is installed, you also need to use software to drive it.,For example, MPT Motokit.,The latter is recommended.,Powerful.,Go to the Internet to search for it.,It's very good.。

If you use motokit to transfer things, it can also be connected to the computer, and you can also drive it down, and install the panel with two works to make the traces possible. You have these in the mobile phone home and have a slippery top post. There are many functions that can be achieved.

Go to the best whispering forum in China.

Check out Good Luck.

You press and hold the * two keys at the same time as you turn on the computer, and you're good to go. Then connect your phone with your computer.

If you connect to the computer if it is charging, it means that it has been connected to the computer If it is not charging, then your driver is not working, you can use MPT software, set driver, backup.

Transmit non-jar format with all-in-one software connection:

When you buy it, you should plate it

It's not a high-end machine, no.

There should be a drive disc when you buy it.

I'm L7,V3 and L7 should be about the same,Our mobile phone and computer two connection methods,In the settings-connection,You have to change it to a memory card connection to have a disk out,There is also a data fax connection,You can also charge,But there must be a mobile phone driver,There will be no disk in the computer,In addition, the extra disk is the file in the mobile phone memory card,If there is no memory card, it will not work。 If you don't do anything else, it may be that your data cable is wrong

Install a driver and try.

If it doesn't work, search Motorola V3 driver directly,

Is your phone on? If it is open, reconnect it and see.

Turn on the device before connecting.

Special software is required to interconnect with v3.

For example: Moto v3 mobile phone software tool.

Very simple. Set your phone's default connection to: memory card. Computer default connection: cable (then it should be noted that when connecting for the first time, it is better to try several times, sometimes the online and offline are more unresponsive than the genuine.) ）

v3 There is no memory card in this new book.,There can be a software management ah.。 You look for it.

Do you think you can use it to pass things directly into it? v3 requires software support to transfer things to and from the computer.

I've also encountered this problem, and it's best to use Motorola's mobile phone companion to be fine!

I'm going to get a PC kit after I get off the drive.

Connect your phone to your computer.

It is recommended not to use the mobile phone and the computer to connect together, if you need to store the physical memory on the computer to the mobile phone or memory card, please use, memory card reader.

You can go to the next mpt in Thunderbolt.。。 It's better to install the next version.

Besides, the phone driver doesn't want to be an exe file like the motherboard graphics card driver.,When you prompt the new hardware, you just point the path to the folder of the driver.。。

Then you don't need to drive down, v3 is driverless, you can just remove the problematic device with the hardware settings wrap.