Why not use the dot broadband connection .

Your friend uses a router, whether it is an automatic connection does not depend on the dynamic IP or a fixed IP, the router will automatically assign an IP and dial up automatically. This eliminates the need to manually tap on the broadband connection.

If you don't want to enter the system, you can go to the Internet right away, there is a way.,You unplug the network cable.。。

The third question,You said that there is an automatic broadband connection option after installing the system.,I think this system is ghosted by someone else.,That is, a mirror image installed with ghost.。 There's nothing strange about this.

Whether you can directly access the Internet depends entirely on how you connect to your modem, router and computer, and the normal connection method should be plugged into the Internet cable and directly access the Internet.

Someone else has a router. The router can be set up to automatically connect that auto-connect just the one that comes with the disk.

He has a router.

The router has an auto-dialing feature.

Generally, if you have no time limit throughout the year, you can get one, because when you use the router, as long as the router is on, the telecommunications bureau will count your time.

If you're my e-family, don't use it.

You can also use the auto-dialing function of IE or your browser, and you can access the Internet when you open IE.

The specific method, you should rate my answer as the best.

Here's how to check whether your broadband is in arrears:

1. Call broadband customer service** for consultation, such as: China Telecom 10000, China Mobile 10086, Great Wall 95079, etc.

2. Log in to the official website of China Mobile, China Telecom or China Unicom Broadband to check whether the broadband is in arrears.

3. Go to the business hall for inquiry with the ID card when applying for broadband.

How to deal with a bad network at home

1. Check whether the broadband is in arrears or expired.

If the broadband expires or is in arrears, there will be a network interruption, at this time, you can pay attention to "China Telecom customer service"***, and find the menu bar below, click [Query] [More Query] [Broadband Information Query] Enter the information.

2. Check the network cable.

If the network at home is poor and the network is always intermittent, it is likely that the network cable interface is loose. At this time, you should carefully check the interface at both ends of the network cable, if you find that it is loose, just plug it in and re-unplug it, and then check the quality of the network cable and the crystal head, in the case of uncertainty, it is recommended to change 1 network cable to try again. Of course, if the network has returned to normal at this time, it is a problem caused by a broken network cable.

3. Check whether the computer is poisoned.

In this case, you need to further confirm whether the computer is faulty or infected with a virus. We need to reset the computer network firewall. First, click on Control Panel and Windows Firewall, then click on "Restore Default Settings" on the left.

This can be solved using Network Repair in PC Manager by following the steps below:

2. Open the installed "Safety Butler".

3. Click "Toolbox" at the bottom left of the interface.

4. After entering the "Toolbox Page", click "Network Repair Ant Bend".

<>6. Click the button "can get on QQ but can't go online".

7. Select the repair method on the left.

8. Click "Repair Now" and restart it after the repair is completed.

If you are using China Unicom broadband, you may not be able to use it normally for the following reasons:

1. If the broadband is in arrears or expires, you need to pay or renew it in time.

2. If the network cable is loose, both ends of the network cable need to be plugged in tightly.

3. If the device is used for a long time, the optical modem and computer can be powered off for 10-20 seconds, and then the power supply can be turned on and restarted.

If you can connect wirelessly, the router is working properly. There are several reasons why you may not be able to access the internet:

The connection between the broadband network cable and the router is not good (for example, it is not plugged in tightly, the connection is too loose, the copper sheet at the crystal plug is rusty, etc.). The network cable signal can't enter the router, so you can't access the Internet.

The broadband cable is damaged – probably in some places.

There is an error in the network connection account and password (not the router password, but the broadband Internet password).

Network failures. This needs to be dealt with by the network company: you can report the problem to the network business. They will send someone to inspect and deal with it.

FYI.

If the broadband is not available, please first confirm whether the broadband is suspended due to arrears, and if so, please recharge first.

If the mobile broadband fails due to non-arrears, we recommend that you perform the following operations:

Restart the modem and plug the fiber connector back in before surfing the Internet.

Determine the status of the modem indicator, for example, whether the WAN indicator is solid or flashing when the port is connected to the modem normally;

Remove the router, create a broadband connection, and reconfigure the router;

If the above methods still do not solve the problem, you can call the local 10086 to report the broadband fault.

[First of all, you need to have router management permissions, and make sure that the router does not have security settings turned on to access the Internet]: on the premise of automatically obtaining the IP, enter it in the browser, enter the username and password admin* after entering (this default can be seen at the bottom of the router).

Then after entering the router, see if there is a check under the security settings "Turn on the firewall (the main switch of the firewall)", if there is, you can remove this check, and then save, see if there is an address pool and DNS server under the "DHCP server", if there is a setting, pay attention to the DNS piece, you need to fill in according to your local fastest DNS, I am in the Guangzhou area, so use these two groups of DNS servers, if you don't know your local DNS server, You can fill in the Universal DNS Server:

Once saved, you can go online.

Hee-hee··· Hope it helps...

Hello, first confirm whether your broadband is in arrears, if there is no arrears, then it may be caused by DNS errors, sometimes QQ can log in, but the web page can not be opened is a DNS problem, modify the address on it.

Solution: 1. Open the Network and Sharing Center - Change the adapter settings 2. Right-click the local connection (Win8 may be displayed as "Ethernet") - Properties - Double-click Internet Protocol version 4

3. Select "Use the following DNS server address", and then fill in the address in the figure 4. After completion, press OK to exit, and generally the web page of the browser can be opened normally.

But I just can't receive and send messages.

The wifi is connected, but I just can't get online, what's going on? Listen to what the broadband master has to say?

If a broadband fault occurs, you can use the following methods to troubleshoot the fault:

1 Use stand-alone dial-up, if you are using a router, please temporarily disconnect the router for testing;

2 Restart the modem and the computer;

3 Re-create the broadband dial-up connection and try to dial again. How to do it: Start the Program Attachment Communication New Connection Wizard.

If the self-troubleshooting still does not recover, you can log in to the mobile phone business hall Customer Service Broadband Fault Report for feedback, and we will get in touch with you as soon as possible.

2.Enter the command ipconfig all in the msdos interface, and then you can view the local gateway and DNS information on the displayed interface.

6.If you still can't access the internet, it may be due to the ARP virus in the LAN. This can be done by using a statically bound ARP operation.

For example, open the software interface, select "360 Trojan Firewall" in "Features", click to enable ARP Firewall, and then click "OK" in the pop-up dialog box. Then restart your computer.

7. After the computer restarts, 360 security guards will remind you that the ARP protection is successful. Occupy the details, you can intuitively see the communication situation of the network. At this point, you can surf the Internet normally and with confidence.

If you don't have DNS, just configure one, and check your local mobile operator for specific DNS.