Sony notebook hidden partition is lattice and cannot enter the system

Let's see if there is a disc in the optical drive.,Take it out and restart it.,If you don't, boot it and press delete to enter the BIOS settings.,Most of the second item has a first boot with a hidden partition of the book has not been used.,I think this place should be your hidden partition.,If it's not, it should be a CD ROM.,Change it to the first boot for the hard disk to start it should be.,If not, change it back to CD to start and reinstall the system.。

Take a look into the PE system,Maybe your system disk model has changed,To give it over,Before my computer installed a dual system,I deleted one,The result can't enter the system,I entered the PE system to take a look,I found that the original system disk C became a h disk,The new disk became a C disk,Later, it was changed,OK can enter the system。

Now the ghost version of the system disk is with the PE system,PQ is not easy to judge,I don't know if you can analyze which disk of yours is which disk according to the list of PQ。

There is absolutely no problem in going to the regular laptop monopoly, I recently bought the IdeaPad Y460A-ith at the Lenovo monopoly, it has Intel Core I-series processors, ATI5650 discrete graphics cards, Lenovo's proprietary TSI acceleration technology, fully upgraded Slidebar, JBL speakers, ......Beyond the small y is a fashionable design, strong performance and audio-visual entertainment perfect combination of entertainment platform, can let you enjoy one step ahead, superior to others The fun of life, ** is not expensive, you might as well try.

If the hard disk is not recognized, make sure the power data cable of the hard disk is plugged in, enter the motherboard BIOS and set the hard disk as the first boot device.

Repartition, install the system.

This is the system hidden partition, and when there is a problem with the system, the system can be restored by the hidden partition.

1.After the shutdown completely, press the assist key and select "Start Troubleshooting (Repair)" according to the prompts (the interface may be different for different models).

2.Follow the tips of the circle step by step.

3.Enter Vaio Care (Rescue Master Mode) and follow the prompts for one-click recovery

The hidden partition will not work, because the C disk is a system disk, once the system disk is formatted, in addition to the non-installation software in other disks, that is, the software that does not need to be installed, the software that does not need to be added to the registry can operate normally, and the other software cannot be run, and the hidden partition is also recorded in the registry. So once you format it doesn't work, it's just a backup.

Win8 my friend installed one.,It's OK.,Can play games.,But there's a lot of bugs.,There's a driver.。

First, press the power button to turn on the computer, and when the computer logo appears on the display, please click the F9 button on the keyboard continuously (different brand keys are different). During the Windows recovery process, the system will automatically load the recovery file or select Windows

setup[ems enabled] and press Enter. Select the language version of the Recovery Wizard and click Next.

Second, keep clicking Next until the Select Partition Project appears, which one can be selected according to your actual situation. Description of the partition project:

1) Restore Windows to the first partition only: This project will only delete the contents of the first partition, leaving the system to keep the other partitions and install the system on" c "Tray.

2) Restore Windows to the entire hard drive: This project will overwrite all the data in your hard drive and restore the entire hard drive into a single partition named" c "。

3) Restore Windows to a hard drive with two partitions: This project will restore the entire hard drive to factory settings. Resplit the hard drive into two partitions, the first one is named" c

The partition capacity is about 30% of the capacity of the hard disk, and the second one is called" d "The partition capacity is about 70% of the capacity of the hard disk and the system is installed in" c "Tray.

Third, follow the on-screen wizard to complete the recovery process, which will take some time.

Fourth, after the recovery is successful, it will automatically restart, and then the driver will be installed automatically, and the recovery system has been successful.

You can use the software diskgenius to try it, it's best to get a boot disk, you can use a USB flash drive, or you can directly use this software to search on your computer, you should be able to find itNow that it's been deleted, you can only use recovery software to view the partition, if you can find it, you can try to restore it, if you can't recover it, delete it and turn it into an extended partition.

I guess you formatted the hard drive when you reinstalled the system. You can use the software to retrieve the lost partition first, diskgenius can also try, it's very good, if you can't find it back, I advise you not to do it, I feel that the original system in the brand does not have too many advantages, we have redone the system when we sell computers, like Linux, Windows7 Home Edition, have reinstalled XP or Windows7 Ultimate Edition. - Finally, if you really want to find that partition, find the merchant who sold your computer and ask him to make a new copy of the same model of system for you.

Hehe, generally don't want money ......

There is no way to recover your Vista hidden partition anymore!

However, it is definitely better to use genuine win7 than genuine vista!

Deleting a hidden partition is very complicated, and you can delete it by following the steps below. I've successfully deleted it!

The method of installing win7 on the USB flash drive is as follows:

1.First of all, you need to find a 4GB USB flash drive and plug it into your netbook.

2.Open the Start Menu in the bottom left corner of the screen, then run the "cmd" command, and you'll see a control window pop up.

Start by typing the "diskpart" command.

list disk": Enter this command and the system will automatically list all disks found on the computer, including the USB flash drive that has just been plugged in.

At this point, you can see the number corresponding to the USB flash drive (for example), and then type: "select disk."

Then type "clean".

Type "create partition primary".

Then enter "select partition 1".

Enter active.

Then enter "format fs=fat32 quick".

Here you can copy the windows 7 installation file to the U disk,Then you need to use the windows 7 ISO file as a virtual *** to install,It's very simple,You can follow the steps below:

1.First of all, install a MagicDisc, which is used to create and manage virtual drives, but if you know that other such software can also be used, this free software is used here.

2.MagicDisc will appear in the system tray after installation, at this point, right-click on MagicDisc and select "Virtual CD ***-ROM" to set up the *** optical drive.

3.Then click "Mount", a dialog window will pop up and prompt you to select the Windows 7 ISO image file.

4.This time in Windows Explorer,Open the *** optical drive you just set to see all the windows 7 installation files,What you need to do at this time is to copy and paste all these files into the U disk,So that you have a Windows 7 installation U disk。

If you have a system disk, you should have a partition assistant in the PE system, and you can delete it with it

Sony's computer will have an advanced option when you go in and install it

Start with a USB flash drive, use PM, and modify the partition.

Enter the PE to repartition it. If you only want to delete hidden partitions, you can do this by adding them to PQ.