-
Anonymous users2024-02-05This is a firmware error.
Re-updating the firmware will do the trick.
It is important to note that:
2. It is best to update the firmware on the XP system.
Got it!
-
Anonymous users2024-02-04The battery is out of power, or the set automatic shutdown time is too short.
-
Anonymous users2024-02-03Hehe, it is recommended to send it for repair!
-
Anonymous users2024-02-02The mp4 is poisoned, or the hardware is broken.
It's good to format the whole disk directly, and save it to the computer if you have important data.
After formatting, let's see if it's good to shut down.,If it's normal.,You copy something in the computer into mp4.,If it appears again,That's your computer poisoned.。 Let's kill or reinstall.
-
Anonymous users2024-02-01Leave it on overnight and drain it all. Or try the reset hole. Presumably a system issue.
-
Anonymous users2024-01-31I use Taipower's P4, just bought a month and often have this problem, generally put it overnight and it's fine, it should be a problem with the system.
-
Anonymous users2024-01-30Did you fall?
Well, it is very willing to be able because of the severe vibration, which led to the poor contact of the lithium battery in the mp4, which can be turned on, indicating that the mp4 system is no problem, as long as the software is fine, it will be easy to repair, it will not cost a lot of money, it will definitely not exceed 50, generally 20 yuan is fine, it is best to go to the manufacturer's designated point for maintenance, or buy **, go there to repair.
-
Anonymous users2024-01-29Poisoned, this is a clear sign of poisoning, put the grid, kill the poison! That's it.
-
Anonymous users2024-01-28I'll give you a little touch. Where are you?
-
Anonymous users2024-01-27It will heat up a little when charging, which is a normal phenomenon.
3. If you still don't understand, it is recommended to call Taipower technical support**020-38731788.
Online shopping can also be taken to our after-sales repair center
Homepage: E-mail:
Weibo: Enterprise platform.
Service**: 020-38731788
-
Anonymous users2024-01-26Press and hold the power button to see if you can turn it on. Mine is like that sometimes, but that's fine.
-
Anonymous users2024-01-25Contact the ** you bought, he will ask you to send it back for repair, and the freight will have to be paid by yourself. Beg.
-
Anonymous users2024-01-24I can only take it to repair.,My oppomp4 was like this before.,The screen went black when I took a shower.。
-
Anonymous users2024-01-23Reasons and how:
1. The crystal oscillator may be damaged, replace the crystal oscillator of the same frequency, try.
2. It is possible to solder the main control and flash memory, and try to re-solder all pins.
3. The firmware may be damaged, upgrade the firmware: What do you mean by "why the computer doesn't read the disk"? Can't connect to the computer, or is it connected to the computer and can't be opened?
After the operation step, the computer may be connected normally; If you can connect to the computer, upgrade normally; If you cannot connect to the computer, short the flash pins D17-D19 to forcibly connect to the computer and upgrade the firmware.
4. There may be a problem with the switch button, the contact is not good, and it is a fact that it is replaced.
5. The above steps are checked one by one in order, if not, they can only be sent for maintenance.
-
Anonymous users2024-01-22Shut down and connect to the computer, first as a hard disk, format and then try again, if it doesn't work, it is estimated that it is a hardware problem, and you need to go to a place such as Science and Technology City for maintenance.
-
Anonymous users2024-01-21My P4 is also C520P, flash it, the firmware version is low, and the response is slow.
-
Anonymous users2024-01-20Just say that we don't know what happened to you, you better go to the point of sale to show him, don't mess around yourself, otherwise there will be a big problem and it will be troublesome.
-
Anonymous users2024-01-19Dear Taipower users, hello:
It is recommended that you do a factory reset try Settings - Backup & Reset - Factory Reset - Reset Tablet - Erase Everything.
-
Anonymous users2024-01-18Try to restore the factory settings, and if it doesn't work, it will be repaired.
-
Anonymous users2024-01-17Dear Taizheng users of this power, it is recommended that you upgrade the firmware program.
1. You can go to Taipower's official **.
2. Open the upgrade tutorial, there will be a detailed process, please follow the upgrade tutorial prompts.
3. If you still don't understand, it is recommended to call Taipower technical support**020-38731788.
-
Anonymous users2024-01-16If there is a disc to update the firmware with the disc, it will be fine.
There are mp1 and mp2, but everyone doesn't use it often and is not familiar with it. >>>More
oppo my classmates bought it.,I've also used it.,I personally feel very general.,Although it says**The format doesn't need to be converted.,But it's blurry and not smooth when you look at it.,And another classmate spent 799 to buy a 2G.,The model was forgotten.,It broke after two weeks of use.。 There is also a classmate Newman,I bought Meizu M6 at the time,She said that Newman's machine reflects the speed is not very ideal,Another is that the button design is not very reasonable,It is awkward to use。 With the machine that Onda's classmates just bought, you have to brush the hardware, otherwise you will see ** ten points card. >>>More
Memory card repair.
After formatting, some cards will be unusable or there will be various errors in the process of use, then you can use the "Disk Utility" in the computer system to repair. Connect the card reader, then right-click on the drive letter where the memory card is located, select "Properties Troubleshooting", then select "Automatically fix file errors" and "Scan and try to recover bad sectors", but it may take a long time, so be patient. >>>More
2 million pixels can indicate the quality of your photos, generally speaking, the higher the pixels, the clearer. >>>More