I m threading the network with someone else, and I want to install a wireless router, how to install

Your PC settings.

You first connect the modem to the home line, and then connect the output of the modem to the Internet end of the router (the input end, the color of this network cable port is generally different from the color of several other network cable ports).

If there is no modem, the carrier does not provide it, skip this step.

Subsequently, connect the cable to your motherboard network card at any of the remaining network cable ports on the router (that is, the network cable port on the backplane of your host), and finally, according to the manual, log in to the router and enter the password given to you by the service provider into the designated part of the router to realize the router's login network (remember to turn on the network pioneer function, please search for this by yourself, don't understand and ask again), according to the router's setup wizard, set the local network password and name.

Neighbor's computer.

First of all, if you don't have a wireless network card, then please buy a wireless network card (not a network card), and then install a driver or something, and finally remember to tell people your network name and password, help people log in once, and check remember the password (if you feel insecure, don't check it, you have to enter the password every time.) ）

Good luck.

Buy a wireless network card for each machine (note that it is not a 3G card like Mobile Unicom), and buy a few of them.

Then buy a wireless router, connect the router with the moden, and set up autodialing on the router on the computer side, so that you can do it.

First of all, whether you are connected from his router or the switch, if it is a switch, plug the network cable directly into the WAN port, and then your computer can connect the wireless signal. If it's connected from the router, after the computer is connected to the router, open the browser and enter the account password is admin, and then change the value in the LAN port settings to achieve it.

The main line (external network) is connected to the WAN port of the route, and the internal network (your own and other people's computers) is connected to the LAN port.

The incoming route can be set up.

One end of the router is connected to the power port, and the other end is connected to a power outlet. This will automatically boot the router.

Please click Enter a description.

Then, use a network cable to connect one end to the LAN port of the optical modem, and the other end to the WAN port of the router.

Please click Enter a description.

If the router is the latest wireless router, you can directly access the Internet after connecting. If it is some of the common routers that we commonly see, you need to set it up before you can surf the Internet. If you have extra network cables, you can connect one end to the LAN port of the router and the other end to the network cable interface of the computer.

Please click Enter a description.

Once connected, open your computer's browser. Enter the IP address of your router in the input field at the top of your browser. Most of the IP addresses default to No, please see the manual) and press the keyboard confirmation key.

Please click Enter a description.

Next, enter your router's login password in the login panel that appears. If you don't know the login password, you can check it on the back of the router. After entering, click Confirm below to log in.

Please click Enter a description.

After logging in to the game, click on the setup wizard on the left, and an interface will pop up on the right. Click Next.

Please click Enter a description.

On the Select Router Internet Access Mode page, select Automatic Router Acquisition, and then click Next.

Please click Enter a description.

Next, the road cavity bypass will automatically obtain the Internet access method. Wait patiently for 10 to 20 seconds. Select the wireless encryption method on the wireless settings screen, and then enter the password of the wireless circle. When you're done losing, go ahead and click Next.

Please click Enter a description.

On the page that appears, click Done at the bottom right. You can save all your settings. At this time, most routers are capable of Internet access.

Please click Enter a description.

If you can't access the Internet, click Network Parameters on the left to enter the Network Parameters page.

Please click Enter a description.

After making the changes to the end of the changes, click Save below. The router will automatically restart, and after restarting, you can surf the Internet.

Please click Enter a description.

Dear, after you have broadband at home, you can directly buy a router for installation. The first is to connect the router to the modem with a network cable, and then connect the router to the computer. Enter the router's primary IP address in the address bar of your computer's browser

Generally this IP), enter the router's settings interface, and then set the Internet access method, enter the Internet access and password provided by the network operator, connect to the network, and Lu did not set the wireless wifi password for you.

After the network cable is pulled, you can directly insert the network cable into the WLAN port of the router without setting a circular volt. If you want to set it up, you can pretend to set it up, and you can bring it with a wifi and password. If you are using a broadband network, you need an optical modem, and then connect to the router.

Figure out the way to access the Internet on the network cable, whether to automatically obtain the IP address or manually set the IP source spring sales address, and then set the hail tour method to the wireless router WAN port, and connect the network cable to the WAN port of the wireless router.

If you have already pulled the network cable and want to install the router by yourself, you can read the manual of the router, and the steps on the installation manual can configure the wireless router to access the Internet.

If you've already pulled up the network cable, you want to install the router yourself. You can directly follow the instructions to connect the corresponding wires in one.

Installation Method:

Method 1: Method 2:

Connect the network cable to the WAN port, connect the wired wireless router (LAN) to enter the management page, set up wireless, and start wireless Internet access.

If you need a broadband connection every time you go online, then the account and password are saved in your computer, just take a look at it with software, copy the account password and log in to the wireless router according to the setup wizard.

Here's how to set it up:

1. Connect your wireless router to your computer first, enter the router settings interface, turn on wireless first, set the wireless encryption mode, and save and restart the router.

2. Still in your wireless router management interface, find DHCP and turn it off. Then save and restart the router. At this time, your computer will not be able to obtain the IP address assigned by the wireless router, and you will not be able to open the router management interface.

3. Connect a network cable from the LAN port of someone else's router to the LAN port of your wireless router, pay attention, both are LAN ports, don't connect the wrong one. At this time, you can restart these 2 routers, and the computer will automatically obtain the IP address, and you can get the IP address assigned by someone else's router, and you can go online.

If you have any other questions, you can continue to ask them.

1. Connect the network cable with the computer first, if you can surf the Internet normally, open the local connection, check the details, and note down the IP and gateway.

2. Connect that network cable to the WAN port of the wireless router, and use another network cable to connect the LAN port of the computer and the router.

3. If the IP written down above is in the same network segment as the login IP of the wireless router, you need to log in to the router and modify the router IP.

4. Change the IP of the computer to the same network segment as the router (.

5. Log in to the router again, set the WAN port to a static IP, and fill in the IP (, subnet mask, and gateway is,.

6. Set the wireless network connection name, password, and encryption method.

7. Save the settings.

If separated by two floors, the mobile phone will never receive a signal, the computer depends on the situation, the installation of wireless routing only needs to connect the network cable to the WAN port of the router, and then it is to set the password, according to the router's setup wizard to do, everything is OK

If your home already has access to the Internet via a wired connection, it's simple, two ways:

1. Install a wireless AP to turn the wired into a wireless signal, or.

2. Use a wireless router to connect the network cable to the LAN port of the wireless router, use the wireless router as a switch, and disable the DHCP of the wireless router, so that it can be connected to the original wired router through wirelessly.

2 answers 1 The situation of the network cable in your home is easy to say You buy an unlimited router on the 6th floor of the network 2 The network cable will cost more than 100 silver in his house Put a router in his house and divide the network all the way to your home Then you are connecting to the router The power of the router cannot penetrate the 2nd floor.

1. The broadband bus (the network cable from the cat) connects to the WAN port of the router.

2. Connect one end of the network cable to any LAN port of the router, and connect the other end to the computer, and start the computer and router equipment;

3. After starting the device, open the browser and enter the router address in the address bar (the reverse side of the router can be viewed) to enter the wireless router settings.

Interface. 4. An account and password for logging in to the router appear in the settings interface, and enter the default account admin

PS: Router accounts and passwords are generally printed on the back or periphery of the router, some router passwords are created when you first set up, and you can reset the router and set the password again if you forget. )

5. Set up step by step according to the setup wizard and select the Internet mode, usually ADSL users choose the first PPPoE, if you use other networks.

If you don't know how to choose, you can directly select the first item to automatically select it, which is convenient for novices to operate, and click next after selection;

6. Enter the account and password applied for from the network service provider, and go directly to the next step after the input is completed;

7. Set the wifi password, try to make the alphanumeric combination more complicated and not easy to be rubbed off the network.

8. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.