What should I do if the car navigation can t be turned off?

1.Long press the power off button on the navigation.

2.If you can't, restart the car, turn off the navigation and then turn it off.

3.Restart the car and put it back in P gear.

Turn off the ignition again and navigation should turn off automatically.

The method of making the car turn off the navigation system automatically sleeps is: the car navigation needs to be plugged in the power supply of the car all the time, the built-in battery can not last long, the battery will be turned off when it is fully charged, and the battery will not be damaged, so the car navigation needs to be plugged in the power supply of the car all the time. In order not to change the internal structure and wiring of the navigation, it is possible to use the navigation power socket.

The live wire is connected in series. Depending on your situation, it is recommended that you go to a repair shop or a 4S shop.

Check to see if there's a problem with the wiring.

It may be out of power, try charging it overnight, and if it doesn't respond when you connect the external power supply, you can only flash it.

The car navigation system can't be turned on:

Black screen on startup: In most cases, the battery is exhausted, many people have a habit of using the navigator is, in order to facilitate the use of the navigator, often do not turn off, the use is to let him default standby, which is convenient to open the speed of the navigator, but the navigator is in the standby state, it will slowly consume the power of the battery, and the power will not be turned on naturally.

After powering on, the screen is powered on, but the screen stays on the boot screen or the white screen cannot enter the system.

This situation generally occurs in people with strong hands-on ability,Most of the situations in a navigator are caused by the failure of the app or OS system,It will become the so-called brick,If you have the software on hand to force the flash,Brush the machine again,If not,Send it to the merchant to flash it。

If the navigation used to be able to shut down normally, and now suddenly it can't be shut down, it may be that the internal circuit of the navigation is broken, the principle of navigation shutdown is mainly related to the ACC signal, when we stop the car and turn off the engine, the ACC signal disappears, and the navigation will automatically shut down.

The cause of the failure of the car navigation system does not turn on.

1) The navigator has no electricity. Please plug in the original charger (the red indicator on the navigator is on at the same time), and turn it on again after 10s.

2) The navigator crashes or is protected due to the owner's misoperation. Each navigator has a reset button. Press the reset button for 3s and then turn it on, if it still can't be turned on, please plug in the original charger and turn it on again.

3) The navigator can be turned on, but after displaying the boot logo (i.e., the e-guide icon), it will die there, and it cannot enter the main interface. This is usually caused by a corrupted navigator program. You should ask the manufacturer for the program and the method of flashing, and you can do it after normal operation.

4) The program is seriously damaged or lost, or deleted by mistake. Reflashing of the program is required.

1. Charge the navigator, charge the navigator according to the usual charging method (it is normal to charge normally, you can rule out the possibility of the wrong charging method), wait for 3-5 hours (if it is out of power, you need to charge to activate the battery), and then press the power button to see if there is a response.

2 Fault problems, including damage to the power button, damage to the charging head, damage to the battery, and damage to the internal hardware of the navigator.

3. The power button is damaged. When pressing the keys, see if the keys are different from usual, whether there are signs of looseness, if there is no abnormality, you can temporarily rule out the possibility of damage to the boot button.

4. The charging head is damaged. Observe the charging head, charging cable, and charging port to see if there is any abnormality.

5. Damaged battery and internal hardware of the navigator. In both cases, you will need to go to a repair point and check before you can confirm the specific situation.

Summary. Hello dear for your question. First, this phenomenon is caused by the problem of the vehicle's central control screen program, if it is the central control screen of the original car, this is the need to go to the 4S store to upgrade the central control screen, or refresh the processing Second, if the central control screen is installed later, this is in the corner, see if there is an RST reset hole, you poke it into it with a thin hard thing, press it for 5 to 10 seconds to reset it Third, This fault is caused by the problem of the motherboard capacitance or CPU inside the central control screen, this is the place where you need to go to the place where you specialize in repairing automotive appliances or navigation, and check the internal motherboard and CPU after disassembling the central control screen.

What should I do if the car navigation can't be turned off?

Hello dear for your question. First, this phenomenon is caused by the problem of the vehicle's central control screen program, if it is the central control screen of the original car, this is the need to go to the 4S store to upgrade the central control screen, or refresh the processing Second, if the central control screen is installed later, this is in the corner, see if there is an RST reset hole, you poke it into it with a thin hard thing, press it for 5 to 10 seconds to reset it Third, This fault is caused by the problem of the motherboard capacitance or CPU inside the central control screen, this is the place where you need to go to the place where you specialize in repairing automotive appliances or navigation, and check the internal motherboard and CPU after disassembling the central control screen.

In normal driving, I want to turn off the navigation, how to turn it off, mine is a Sylphy car, that is, how to turn off the large-screen navigation on the car.

Pro,Turn off the car navigation to return to the main interface from the navigation interface,And then in the lower left (usually the lower left) there is a protruding button (generally this key can also adjust the sound) press it to turn it off。

Mine didn't press the buttons.

There is a back button on the home screen.

It's a pro on the screen.

Touch-sensitive ones. Just like on your phone, tap on the corner of the screen to exit.

To turn off the car navigation is to return to the main interface from the navigation interface, and then there is a protruding button at the bottom left (usually the bottom left) (generally this key can also adjust the sound) and turn it off. With GPS global positioning system function, you can know the exact location anytime and anywhere when driving a car.

How to turn off the car navigation while driving:

1. Car navigation is carried out by using on-board GPS (global positioning system) with electronic map, which can easily and accurately tell the driver the shortest or fastest path to the destination, and is a good helper for the driver.

2. With GPS global positioning system function, you can know the exact location anytime and anywhere when driving a car. Car navigation has automatic voice navigation, the best path search and other functions can be a shortcut, unimpeded, integrated office, entertainment functions allow you to drive easily, efficient travel, general car navigation functions have *****, radio reception, Bluetooth hands-free, touch screen, optional functions, intelligent track reversing, tire pressure detection function, virtual six discs, background control function.

Photo by Li Linwei) M5 Xpeng P7 AION V Trumpchi GS8 Xpeng P5 Ideal ONE @2019

1. Take the Phantom S3L car as an example, for example, accidentally touched the navigation icon in the display screen while driving.

2. Then enter the map interface.

3. If you want to exit the navigation, just clicking the main menu button on the left is not useful, and the navigation will continue to broadcast in the background.

4. To exit the navigation completely, you need to do the following. Click the arrow at the bottom of the page.

5. Then pop up the function menu and click [Function].

6. After entering the function page, click [Close System].

7. The confirmation box pops up, click [OK] to really exit the navigation.

This car navigation should say that it has a setting in the function options, and then after entering the settings, it has a button to turn off the system, and you can press it directly.

This can find the system settings of the car navigation, and there will be a system off in that menu, click on it.

If you have car navigation, you need to press and hold the switch button to turn it off automatically, you can try it.

Hello,This can be closed in the navigation interface.,It's very simple.。 In that case, the navigation will not be opened directly when the device is turned on.

If you don't open it, you can just quit, and if it doesn't work, you can restart the vehicle and not open the navigation.

Hello, which car is yours, the latter or the original? Simply click Exit to close the navigation.

Hello,This can be closed directly,Or just turn off the central control screen,

1: If your navigation is powered on, (the backlight and key light of the navigation are on) there is a black screen, which is the diode of the navigation front screen motherboard burned out, resulting in excessive current and a short circuit in the energized circuit.

2: If your chain navigation is not powered on, can not be turned on, you can see if your cigarette lighter is still operating normally, if not, it means that there is a small resistance wire under your dashboard burned, to the place where you install the navigation let him help you change a new one, this can only mean that your navigation voltage is not very stable.

3: If your navigation is not powered on, it can't be turned on, the rubber cigarette lighter is normal, remove your navigation, there is a plastic plug and unplug head above the navigation power line. Take it out and take a look (take it off) to see if the resistance wire inside is disconnected from the shed, if there is a replacement is good, if not, then go to the after-sales repair.

Summary. Hello dear, the car navigation is turned off by pressing the wrong button to open the steps are as follows: 1. Turn on the navigation switch button (usually on the left, the button in the circle and the vertical line); 2. After opening, the initial interface is displayed (usually the station is displayed first), and then click the menu bar button in the interface (usually at the bottom left); 3. Click the "Navigation Bar" button in the menu bar, and the system will enter the navigation interface; 4. Determine your location according to GPS (satellite positioning), and now you can search for the destination you need to reach.

Hello dear, the car navigation is turned off by pressing the wrong button to open the steps are as follows: 1. Turn on the navigation switch button (usually on the left, the button in the circle and the vertical line); 2. After opening, display the initial boundary rent Bizi surface (usually display the Dianhui lead platform first), and then click the menu bar button in the interface (usually at the bottom left); 3. Click the "Navigation Bar" button in the menu bar, and the system will enter the navigation interface; 4. Determine your location according to GPS (Satellite Positioning), and now you can search for the destination you need to reach.

It should be noted that if the destination is somewhere else, you need to open the locale here, find the province and city where the destination is located, and then rent the destination and set it as the destination, and finally click the navigation button in the lower right corner to reach the specified destination.

Dear, this is a problem with the center console line, you need to go to the store to see and change the line.

No. That would have been my mistake.

Not shown. What key did you press.

It's out. Okay pro.