Do I want to dismantle my speakers, what should I do, please advise

If the monitor is not used for a long time, there will be the problem of moisture, and the color of the display will be distorted after being wet.

To let the water in the monitor completely evaporate on it It is recommended to turn on the computer occasionally when not in use for a long time Use the computer's own heat to evaporate the water vapor accumulated by the host of the monitor This is better for the computer If you don't use the computer for too long, the computer will burn out when you turn it on, that is, it should be the relationship between the water in it So don't think that the computer will be fine if you don't use it Don't take it to the sun !! This will seriously affect the color of the display, the temperature of the sun is too high, the light is too strong !! Something that would destroy the surface of the display I forgot what to call it!

Anyway, it's for imagery! A layer of portional stuff! Bright light will decompose him!

Make your monitor unclear

I have also encountered such a situation with my monitor, it is indeed a problem of moisture, and it can be left in a dry place to air dry for a few days.

The socket contact is not good, the external speaker does not pronounce, the phenomenon you said is that there is no treble and midrange, all frequencies below 100hz, and it sounds the same as you said.

The speakers should not be in good contact with the monitor Did you put two speakers on either side of the monitor?

If that's the case, then you're magnetized.

You take it to the sun first, and if it doesn't work, you have to call it to be repaired.

Different models have different disassembly methods.

The low-end horn is integrated and should be warped. The better ones have screws, open the panel, find the screws, and you can open them.

The amplifier is generally placed in the woofer, which is basically fixed with screws.

Recommend a speaker to you, Philips, Edifier is still good, Philips** is more expensive, there are more fakes, consumers are more passive when choosing, it is not easy to distinguish, Edifier's words,**Although it is cheaper, but there are still shortcomings, that is, it is mainly a low-cost audio, so there is still a certain lack of sound quality, can not be too demanding, and these two are similar to BT-audio's ab hifi is relatively good, The AB bookshelf box is a HIFI box with excellent overall performance, reproducing the classic pure British sound. Using super instantaneous reaction unit, the treble is not scattered, the bass is not sticky, the strong sound is not dry, the weak sound is not false, the warm and mellow sound shows the infinite charm of the **, you can feel the legendary and charming melody of the British sound, and enjoy the bloodline, sound quality, and workmanship are all excellent HIFI speakers.

The style contained in the AB bookshelf box comes from the unique design of BT-Audio's sound engineers, with a refined and elegant appearance, to create a bedroom and study desktop HIFI speaker. The first-class workmanship and sound quality have created the myth of high-end and low-price in the audio industry, and completely brought the concept of parity to the extreme!

Big brother,What kind of speaker do you also say?,A good speaker or a garbage speaker,Look for a good one,Generally, you can disassemble it by unscrewing the screws of the speaker,Some are back panels that can be opened or side panels。 The domestic garbage speaker was not dismantled.

I also have one of this speaker. I bought it for 29 yuan at the time.

I've used it pretty well, I haven't dismantled it.

You try to see the four feet, you can remove them, there are no screw holes in them, and there are two gray feet on the side, you can't open it, don't pick it up if you can't pick it up, it's estimated that it's under the four feet.

As long as the output power and impedance of the replaced speaker are the same as the original speaker, the book is OK. But you should add another two or three inch tweeter, but also can not increase more delicate and less burden, and then the speaker is best to use a two-way divider to drive, which can make up for the lack of treble, make the sound quality more pleasant to the ear, its sound quality can be comparable to the original full-range speaker, maybe better. The two-way circuit diagram is as follows:

The two-way divider can be made by yourself, and the L1 in the picture can be wound around 300 Heng vertical macro 400 times with enameled wire for a plastic frame, and the number of turns can not be too much, too much sound is muffled. C1 uses 1 10 micromethod electrolytic capacitors, and C2 uses a capacitor of several hundred p, which is used to reduce the "snort" of the woofer. The frame is shown in Fig

There are many ways for a speaker to break down:

1. Turn on the power to the maximum, and the speaker will be finished by itself after a while.

2. Sweep the sub 220 power supply, and use it with caution.

3. Tie the wires together, and it will burn in a while.

The suggestion is as follows:I don't know if the speaker is my own or someone else's,If it's my own, it's worth the loss.,If someone else breaks it, it's not safe.,Why bother.。 What is the best solution to the purchase, everyone is human, long live understanding.

If you can't touch his computer, call 110 is the most straightforward, once or twice, and JC will clean him up.

There is also a kind of fighting poison with poison, as long as he releases **, you also release, and the sound is louder than him. Look who's better than whom, hehe! But be careful if your neighbors call 110 :)

As for the method of directly connecting the two lines together and then burning the IC, it is very undesirable to teach you to engage in sabotage, and if it is more serious, it is a crime. And if the IC is burned (full man-made damage), there is no warranty. I don't know how this master can even think of such a low-level trick.

It's just hurting you!

Hehehe,These carving insect tricks,The destruction methods upstairs are all visible on the surface.,Teach you,Connect the two lines of the audio output directly together,Put the three channels like this,The IC inside will be burned.,Only take it to the warranty hahaha,(*Hehehe......