Can the TEI402 wired router be connected to the TPLink mini wireless router? Find Method 30

Yes, the LAN port of the wired router leads out of the network cable to connect to the WAN port of the tplank, and then configure the wireless router as follows:

The WAN port of wireless routing uses dynamic IP, that is, the IP is automatically assigned to him by the line or the static IP is set, which is required to be the same as the IP of the LAN port with the line (that is, the IP is the same network segment as your current computer but the IP is different).

Configure the wireless router for wireless.

Use your phone to connect to your wireless router. Internet.

Yes, you can use the Tengda router as the primary router, and the TP router as the secondary route, just make a secondary route.

Yes, connect the LAN port of the TEI402 wired router to the WAN port of the TPLink mini wireless router and configure the wireless parameters.

The first router is abbreviated as A, and the second router is abbreviated as B.

1. A according to the normal settings, turn on DHCP. After setting A, unplug the network cable connecting the computer to A.

2. Connect the computer to the LAN port of B. Go to the settings page of B. Click Parameter Settings, LAN Port Settings, and modify the LAN port IP address to. Save the reboot and use the login route later instead of the original.

3. Use the login route, click WAN port settings, and set the WAN port connection type to dynamic IP;

4. Turn on the DHCP server of B, and set the automatic IP on the computer;

5. Click on the wireless parameters, turn on the wireless function, allow SSID broadcast (optional), and turn on the security settings.

6. After all the settings are completed, plug the network cable from outside (or the network cable connected to the WAN port of ADSL cat) into the WAN port of A; Connect the LAN port of A and the WAN port of B.

7. After all are connected, it can work normally. The operation of router B does not affect the normal operation of router A.

B router can realize wifi Internet access.

1. Enter the router:

Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name, password, (the default is generally admin).

2. Wireless Settings - Wireless Security Settings - Select [WPA-PSK WPA2-PSK].

Authentication Type: Automatic.

Encryption algorithm: AES.

The PSK password is the wireless password. Set the required password.

Tengda TEI402 is not a wireless router, it is a wired router and has no wifi function.

1. Connect the line between the network cable, the router and the computer, and start the computer and the router equipment;

2. After starting the device, open the browser and enter it in the address bar to enter the wireless router settings interface. (If you can't get in, please look at the nameplate at the bottom of the router or the router instruction manual, the default settings of different models of routers are different.) ）

3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin, or refer to the manual;

4. After successful login, select the interface of the setup wizard, which will automatically pop up by default;

5. After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;

6. Set up step by step according to the setup wizard, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

7. Enter the password applied for from the network service provider, and go directly to the next step after the input is completed;

8. Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

9. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

You can use a wireless router, the signal is 150m, and other rooms can receive it. You can set up an unlimited router yourself.

You can use a wireless router, and the signal is 150m

The quality of Tengda's routers is average. On this kind of ordinary router, QoS has no practical meaning.

If it is easy to drop, there may be one of the following reasons:

1。If you are on a local area network and your computer has a virus, the virus will continue to attack the network automatically, causing the router to be unable to process the data and the network will be congested. causing network paralysis;

2.The quality of the router is not good, so try to buy the best router, not in order to save a little money (now the price difference between large brands and small brands of home routers is very small, generally no more than 20).

3.Turning on routers, cats and other devices for a long time causes these devices to heat up and crash, and cannot process network data correctly.

Routers, cats and other network equipment, especially small household types (don't ask me why, Internet cafes can wait, these network equipment is professional, high, powerful, with special processing solutions and technologies, etc.) In fact, it does not support continuous use for a long time. Sometimes you may feel that you have never turned it off, and he can use it, and I am not saying that it can't, but try to avoid turning it on for a long time.

If used for a long time, it will cause the router, cat and other devices to heat up, unable or unable to process network data in time, which may be manifested as slow network speed, or dropped connections, etc. Therefore, it is recommended that when you turn off your computer, you should also turn off these devices and turn off the power. This not only saves power and network resources, but also makes a reserve for better performance next time you use the hardware.

If it's not convenient to turn off these devices, you should also turn them off for at least 30 minutes during idle use before continuing to use them. At the same time, these devices should be kept in a ventilated area, just like a computer.

It's very simple, connect to the router, set it up, and you're good to go.

Plug the broadband network cable into the WAN interface of the router, connect the computer to the LAN interface of the router with the network cable, and set the router as follows:

1. Log in to your router (enter or log in in IE, enter the username and password, and the router label is there.) Usually admin).

2. Go to the "WAN" setting

A If your broadband requires an account password, set up PPPoE, fill in the account password, select Automatic connection as the connection mode, and confirm that if your operator binds the account to your computer, choose to copy the MAC address of the terminal.

b If you don't need the account password, if you are given a fixed IP, please select a fixed IP address and fill in the correct address of the fixed IP address, mask, gateway, and DNS.

c If you don't need the account password and it is a dynamic IP address, please select a dynamic IP address and fill in the DNS address.

3. Go to the wireless settings, select WEP or WP2-PSK, set the wireless password, and remember this password.

4. Go to the "DHCP" settings and activate the DHCP server.

5. Connect the broadband network cable to the "WAN" port of the router.

6. Connect the computer to one of the "LAN" ports of the router.

7. The computer is set to automatically obtain IP address and DNS address.

Computers, mobile phones, and wireless devices should be able to access the Internet.

If there is no wireless function, ignore the wireless part.

Two ways to access the Internet at the same time, one is to connect to the router with wire, the other is to use wireless, see if you this router supports wireless no, wireless is relatively simple, directly obtain IP (automatic, that is, the wireless attributes of the two computers are set to automatically obtain IP), and configure the IP address you get from telecom into the router.

In the IE address bar, enter or the back of the router has) and then the interface appears asking for the user name and password The general one is admin, and the password is also admin Enter the setup wizard to assign the IP to select the static IP that automatically obtains the dynamic IP

Then click Next as prompted, and finally restart the route. (You can also turn off the router power and turn it on again).